Talks way to much

Is it the same way for 09 C350?

Good video, not sure about cleaner used, may damage paint and you.

You can compress a fluid but not necessarily a liquid. Air is a fluid.

The explanation of how AC works is flawed. Blowing a fan across the evaporator is not how the air is cooled. The cooled evaporator ABSORBS heat and transferred to the refrigerant which is basically pumped to the condenser. You need to remove the heat energy from the air to cool it.

Nice video work, good “how too” instruction covering all the key points.

Thank you

This doesnt work on newer digital sensors, this is an old analog sensor that produces its own current

After an hour of struggling!!!! The torch method worked! Thank you!!

I am watching 5 years from when this was posted lol

First time watching your channel. Dude! I hope you don't take this wrong but you're the Bob Ross of car how to. I just happened on your channel because I'm doing the same thing on my 55. You should butterfly your adel clamps for the fuel lines(looks better) and on the vent put a standoff or spacer where the filler tube attaches and secure it there. Good install though.

For those asking where a fuel filter is located. Don't do this yourself. You still have a lot to learn. Lol.

You bleed the caliper farthest from the master cylinder first do not start from the closest

I always forgot and always come back here👍🏻

If you ever want an acting gig to play "Big Boy' as in the resturaunt chain you got the part. Just joking thanks for the detailed fix.

great video you've made me want to do mine

I think your torque is 25 and tolerance is +5 (obviously we don't want less than 25) giving a 25-30 range, not torque to 25 and add 5, that would just be 30.

🎶👋👌❤️

This is the best video out there showed me everything I need to do the job

TOP!! Tnks for this video.

You didnt show the proper installation of the filter o ring so it doesnt leak (very important). The drain plug gasket should always be replaced as well and torque the plug to specs. And most importantly, the process of resetting the engine maintenance light after changing oil. Just sayin'.

Helpful thank you

Never put steel washers against an aluminum surface. Galvanic corrosion.

My car problem ( ABS) after 25 kilometers abs light on ,please let me know what can I do

Are the magnets there to attract any metals that might be in the fluid?

Two tips-1-BEFORE using a C-clamp to push the piston back into the caliper rather than pliers, 2-measure the thickness of the pads and rotor and then only retract the piston an equal amount and then install it. Also, loosen the cap on your brake reservoir BEFOREHAND and then put it back on BEFORE PUMPING THE BRAKES. GLTA

When you vaccum the system it dont pull the oil ?

Pay attention to the direction that the fuel gauge sender lever is in, on the front side of the tank in the open area of the bucket in the tank. My advise is to test it with an ohm meter before installing . My fuel gauge didn't work after installing the pump module. Also, the cover is installed with the hose nipple pointing directly forward, I don't know what the arrow is for, it doesn't align with anything in particular.

This clown puts a stupid soundtrack to the video, but doesn't bother telling the size of the filter bolt or drain plug. He thinks he's back in second-grade show & tell. And pour any kind of oil you like in, or look it up because this clown won't toss that in either. Haha, the Dipshit was nice enough to kind of tell how to read the Dipstick!

From Puerto Rico, thank you so much for this video, perfectly explain in plain and simple english. Super way easier than i thought. I can do all this by myself. God Bless you. THERE IS SALVATION IN JESUS.

Much appreciated!

My fuel pump isn't getter full power after replacing it nothing is reading correctly and no gas is sending to the engine i already looked at all the fuses and replaced one should i replace the clip for the fuel pump itself?

Best and the most accurate way is spray spirts of starting fluid around the the main manifold and heads it the engine rubs up you have a bad head gasket or bad manifold gasget old school is always the best way

Brake calliper is either Torx 55 or Hex18mm. Caliper mount is Hex 18mm. Could be uselful to add in overlay the torque spec.

Wicherin tires ? XD

Just get to the point. We all know what the problems is or we wouldn't have waited through the annoying commercial. Skip to 1:40

Wires do have to match, not all universal? I chsnged out plugs n wires n now check engine light on, everything in snug

Very good job.

Great video. Very helpful.

"We going to turn the key in the ignition position without starting the vehicle" and then all KZfaq can hear the engine running. Garbage.

Dont you gotta refill the oil in the center of the filter before screwing it in?

I don't think my headcasket is blown..but still leaking oil.had rear main seal replaced and oil sensor..still leaking. Any advice?😊

Great vid', dude! You cleared up a doubt I'd had for decades!!!

Have saved, bookmarked and watched this as I am planning a 5.3 swap for my baby(see my ava). Thanks for the video, it will certainly come in handy

i think you will all find that it only bleads air outta the abs modul not the actual 4 lines .its not ment to it just activates the valves in the abs unit to push any air out .becouse you carnt get air out in a normal break blead esp if you let the vsystem run out of fluid by accident or whatever.

Iif theres air in system will it give false code ie reluctor ring tooth missing along with abs light on dash?

Thank you for your video You saved the day!

Great job

Thank you so much for this video! I tried to remove the glove box and that didn't work, but you saved me! The dealership was charging me $120 for this and I don't have that kind of money right now. Now I'll go see if i can change the engine air filter. 😂

I have their 383 in my 62 C10 Project truck and it is awesome! Now I have traction issues.