Hello, I recently purchased a timegrapher, Weisher 1900, and put my Seiko SPB121 with the 6R35A movement on it and it's running a bit slow however my main concern is the variation between the different positions: Date: Position Rate (S/D) Amplitude Beat Error (Ms) 6/30/2024 Dail up -15 193 0.2 Dial down -3 209 0.5 Crown at 12H -62 163 0.1 Crown at 9H -12 183 0.7 Crown at 6H -12 174 0.7 Crown at 3H -44 181 0.1 There's almost a 60 second difference between some positions. Wondering what your diagnoses is for that or if that's what you get with a mid grade movement, is there a problem with the balance wheel or does the movement simply need to be taken apart, cleaned, lubricated and put back together? I fully wound the watch and let it sit for a couple of hours before I pulled these results. I bought the watch new about 4 years ago and it's never been serviced. I'm not expecting to have 0 positional variance however expecting numbers better than this. Thank you!
@watchrepairtutorials8 секунд бұрын
Well first of all thank you for providing the information I need. Most people just send me one position. You didn't exactly right. The amplitude is very poor in all positions. Your vertical amplitude is such that any poising error on the balance wheel is heightened. 160-180 is the worst possible amplitude for vertical positions. The regulator pins appear to be properly set so I don't think that's an issue. Your delta rate is 59. Delta rates are THE indicator for trouble in the movement. Movements coming out of the factory lubricated which is very inconsistent as far as its accuracy. I think this is all pointing to the movement needed to be fully serviced.
@allneatstuff16 сағат бұрын
Alex I am a beginner and i am starting with vintage mechanical watches. I can't afford a full set of Bergeron winders is a #6 winder a good start? Thanks for all you help.
@da___man20 сағат бұрын
Great video as always. I was rewatching because I managed to get a great eBay find on a set of 7-8 burnishers. However, they need to be dressed. My purchase also came with a tin plate for polishing. Surprisingly heavy. It has a fine grey powder on it. Possibly diamantine? Any advice on dressing them with the tin plate? Thanks.
@watchrepairtutorials18 сағат бұрын
If you are asking about dressing a burnisher, I didn't in the video
@kayakuprising5914Күн бұрын
Awesome info! Thank you.
@watchrepairtutorialsКүн бұрын
I hope you can use it sometime.
@yellowtobleroneКүн бұрын
finally, i can find my private parts
@iranazadi19632 күн бұрын
hi do fix watch oris
@NaNByZero2 күн бұрын
Sir, you tend to make the impossible become possible. I can’t tell you how much I appreciate your skills. 🕐⚙️🍸
@watchrepairtutorials2 күн бұрын
As always, Thank you so much 😀
@NaNByZero2 күн бұрын
@@watchrepairtutorials As always, I am the one who has to thank you. :)
@normanrehme38362 күн бұрын
Perfect timing. Now I get to make another tool I didn’t know how to make.
@NaNByZero2 күн бұрын
Make it! Make it. Hehe 🕐⚙️🍸
@watchrepairtutorialsКүн бұрын
Timing is everything, yea?
@NaNByZeroКүн бұрын
@@watchrepairtutorials Definetely. lol
@timnath66043 күн бұрын
Man didnt fluff around and came straight to the point, love it and thanks
@NombreFrancisco3 күн бұрын
This is why I tell people that Watch Repair is a great hobby. So much to learn from everywhere. Even just from Utube.
@brianwohlleben31823 күн бұрын
What are your thoughts on the eve pin polisher that ive heard reed by several others?
@watchrepairtutorials3 күн бұрын
They have their place, but they can't replicate what a burnisher does.
@brianwohlleben31823 күн бұрын
@@watchrepairtutorials that's kinda what I thought. They are probably ok but not as good?
@watchrepairtutorials3 күн бұрын
@@brianwohlleben3182 burnishing works by stretching out the metal which fills in low spots which leaves a polished surface. Doing it with an eve would be removing material, which is not ideal for side shake which can cause problems with how the balance runs.
@brianwohlleben31823 күн бұрын
@watchrepairtutorials ahh! So eve would be better for light rust or cleaning of an otherwise healthy pivot. But a worn piviot needs to be burnished.
@watchrepairtutorials3 күн бұрын
@@brianwohlleben3182 well you have to be careful that you don't bend the pivot. I've used them for light polishing inside barrel arbor holes. "Rust be gone" is good for rust removal folllowed by polishing.
@RollaArtis4 күн бұрын
The problem for many repairers is that they have no idea about the mechanical theory, how the watch actually works. You ask them why the lever escapement needs oil and they won't know.
@watchrepairtutorials4 күн бұрын
I totally agree with what you're saying. Probably the biggest gap in knowledge is that of the escapement and its functioning. When you're working on vintage watches, other problems can be somewhat obvious, but when it comes to problems within the escapement, that's where people get hung up .
@alvinwatchiadorvlog25874 күн бұрын
Hi Sir Alex, thank you for sharing this informative videos i play all vidoes one by one to added me technaque for repair my Watch and thank you for Tips before end of videos. from Philippines
@watchrepairtutorials4 күн бұрын
That's very wise. Learn and practice, Learn then practice. There is not enough practicing going on. Everyone learning watch repair should have several movements that they use for practicing on. You definitely don't want to practice on grandpa's Rolex. If you know what I mean..
@alvinwatchiadorvlog25874 күн бұрын
@@watchrepairtutorials Thank you Sir, Alex ur Advice...
@spankyharland98454 күн бұрын
I used polywatch on my wife’s face and it removed all the wrinkles, she looks 21 again.
@watchrepairtutorials4 күн бұрын
😂
@skshahid50953 күн бұрын
Hahahahahaha great one
@jd18384 күн бұрын
Hello, friend Smith, thank you for sharing, a question, what type of lubricant do you use on the paddle and what type do you use on the jewelry, thank you
@watchrepairtutorials4 күн бұрын
Hello, I need you to use the proper terminology so that I can answer your question.
@itzhaccroitoru40825 күн бұрын
Think i just fried my brain a little.Very informative video
@watchrepairtutorials4 күн бұрын
LOL, sorry.😅
@ammichalzeszen5 күн бұрын
Holy crap you're a life saviour. I was nearly giving up on the hobbie untill your comment at around 12:00 about the misalignment of the fork with the jewel.
@watchrepairtutorials5 күн бұрын
Now you know.
@yellowtoblerone5 күн бұрын
where's antman when you need him
@Deckos5 күн бұрын
F’in awesome video. I like your style.
@watchrepairtutorials5 күн бұрын
I appreciate that!
@gmartin290005 күн бұрын
Thank you for the video. I received the diamond polishing film from Sharpo and it was easy to use and did a fantastic job with the super polishing!
@watchrepairtutorials5 күн бұрын
Perfect!
@user-fw4kk1ym9y6 күн бұрын
👏👏👏
@2manysigns6 күн бұрын
Neat tip .
@watchrepairtutorials6 күн бұрын
Thanks 👍
@amandagelien96126 күн бұрын
another fine lesson Alex I have a project to work on tonight as I have broken to many regulator pins Thank you again Alex😍
@watchrepairtutorials6 күн бұрын
And this is why I made the video Amanda. I know there are plenty of people who will not do this because they have no intention of ever trying to make these types of adjustments. But there are some,like yourself, who know the importance of this adjustment and just haven't figured out the how.
@ChrisR6 күн бұрын
Man I wish I knew this trick a few years ago when I shot a cap jewel off into the 18th dimension and had to buy another movement to get a replacement. I never did find that jewel despite an extensive search.......
@watchrepairtutorials5 күн бұрын
I was recently cataloging some parts, and I was holding a pallet fork by the horn to measure the pivot size in my micrometer. The pallet for ended up coming out of my tweezers and out of the corner of my eye I could see the pallet work fly into my shirt pocket. I was almost 100% sure it was in there. Looking in the pocket, I couldn't see anything. I use the UV light to shine in my pocket and there it was buried in the corner.. You just never know when you're gonna need it.😉
@zolikoff6 күн бұрын
The US average may be 600 mrem but that doesn't mean it's individually true for all humans on Earth. There are some places where the natural exposure exceeds 10,000 mrem per year for the local population. Also in reality not just the dose matters but the dose rate as well, although the LNT model postulates that dose rate is irrelevant (but seems to be wrong about that).
@watchrepairtutorials6 күн бұрын
That's interesting. Thanks for sharing your views.
@onlyonestinger6 күн бұрын
so were can i buy a cheap aluminum holder for my pocket watch repair
@watchrepairtutorials6 күн бұрын
All the major suppliers have one if you just search for pocket watch movement holder. I will have to say that they don't hold pocketwatch movements very stable so I got the Bergeron one which runs about 80 bucks.
@Josias6477 күн бұрын
Aprendice Brasil. Restauration.
@watchrepairtutorials6 күн бұрын
Thank you.
@Josias6477 күн бұрын
Very good
@watchrepairtutorials6 күн бұрын
My pleasure my friend.
@KrimNL10DenZ7 күн бұрын
Does this mean I have to find/buy vibrating tools for all the different frequencies a watch can run at?
@watchrepairtutorials6 күн бұрын
You would but they could be very difficult to find. Most vintage watches are going to be at 18,000 beats per hour until you get into the 70s. At that point, you'd be better off, trying to find a hairspring.
@JDRichard7 күн бұрын
Hey Alex woke up this morning to this wonderful video on how to make this tool. Of course now I have to go make this tool. I do have lots of other work to do today, including work. My wife probably wants me to do, but making this too old, seems like a lot more fun. The other thing that you need to do is tell people how to close the regular pins, but that is probably obvious as you just push them with a very fine pair of tweezers and then use your tool to do the final adjustment. I’ve been given a Hamilton 992 pocket, watch to work on and this thing is way out of beat and has some pretty big deltas in all positions. So we’ll see what the gap is for the regular pins as I attempt to get this thing performing better, after cleaning.
@watchrepairtutorials6 күн бұрын
Isn't it great being retired JD? I have a 992B on the way that's coming in pieces.
@JDRichard6 күн бұрын
@@watchrepairtutorials it is good to have actual time to do your watch work and not worry about having to go to the office
@pipodorologio16487 күн бұрын
amazing...had to replace my first mainspring last week and my teacher showed me this. Thanks for sharing.
@watchrepairtutorials7 күн бұрын
That's awesome. Who taught you that?
@pipodorologio16486 күн бұрын
@@watchrepairtutorials just started a course at a friend who is a professional watchmaker
@Michael.Chapman7 күн бұрын
Your expertise and experience is a joy to behold :-)
@watchrepairtutorials7 күн бұрын
Hello Michael. Thank you very much. Have you watched he's any of my other video series?
@frankporfidio98137 күн бұрын
Great video , I'm an electronics tech who always had an interest in watches ....STILL can't believe how tiny this stuff is !!! great info here .
@watchrepairtutorials7 күн бұрын
Your background will serve you well, especially since you worked under microscopes.
@frankporfidio98136 күн бұрын
@@watchrepairtutorials Any books or manuals you'd recommend ?
@watchrepairtutorials5 күн бұрын
@@frankporfidio9813 Bulova school of watchmaking.
@bvillas7 күн бұрын
I should have seen this video before. Just bought a for parts movement to take the cap jewel I lost few days ago and couldn't find anymore
@watchrepairtutorials7 күн бұрын
Well now you may find it. Thanks man.
@maciej62937 күн бұрын
Why do you loosen every single screw slightly before the final tightening? I noticed you do it with every screw like that, so there must be a good reason?
@watchrepairtutorials7 күн бұрын
When I put the screws in initially, I'm just securing the bridge in position, then I checked the wheels again to make sure everything is free spinning. The reason I back off or reverse the screws is, I want to feel the resistance of the screw to the part then I turn the screw the width of the screw slot for the final tightening. That's how you know the screw is tight enough.
@maciej62936 күн бұрын
@@watchrepairtutorials That's a very good method indeed. Thank you!
@grimm-17 күн бұрын
I have been getting interested in watch repair for a couple of months now and I have watched a number of your videos. You have taught me a lot. Finally I have something to contribute to you. My background is in metallurgy and I spent my career in the heat treatment of aerospace parts. When you heat the mainspring material red hot with a torch and allow it to cool in air it is not tempering. It is technically Normalizing. It will probably make the material soft enough to cut and file but it may not be the best way to accomplish this. There is a risk of some areas, like the edges, cooling quickly enough to partially re-harden. Heating the spring to a temperature slightly below red hot, if you can do it, would produce a lower hardness and less chance of breaking while cutting and filing. Then when re-hardening the finished tool the steel just has to get barely red hot to allow it to harden on quenching, around 1500 degrees F. In the video it is way overheated. Probably works most of the time but its not necessary. After quenching temper the tool in any oven at about 450 degrees F for an hour or so. This will lower the hardness slightly but increase the toughness greatly. I hope this helps.
@watchrepairtutorials7 күн бұрын
Wow. Thanks for that. I am obviously not a metallurgist so I was just showing the way I was taught it it's great to hear from someone with real world experience.
8 күн бұрын
Lol...I was going to ask you to do this very same type of video. Thanks!
@watchrepairtutorials7 күн бұрын
Hope you enjoyed it!
@philspencelayh54648 күн бұрын
My problem with Omega is that I like the idea of getting a co-axial movement but there is nothing in the current catalogue I like, nearly everything has a dial like a ploughed field, some like a badly ploughed field. They used to do some stunning watches years ago so I'm keeping an eye out for a second hand one. To be fair there is nothing in the Rolex catalogue I'd want other than the 36mm Explorer and I've already got the best version of that.
@watchrepairtutorials8 күн бұрын
I hear you on that one.
@drkujavec8 күн бұрын
Thank you again. You are a great master watchmaker! Thanks to your valuable help today I have been able to finish the restoration of my fourth watch, a beautiful Seiko Advan that I will wear with pride. My dream is to one day reach your level so that I can pass on this knowledge to others as well. I will practice hard until then.
@watchrepairtutorials8 күн бұрын
That's a beautiful goal. Keep learning my friend. Never stop learning.
@villepaananen51908 күн бұрын
Hi Alex! I'm a new watchmaker hobbyist from Finland. I found your videos and started learning from those. And I find them really good. Love your bonus tips :D Keep doing good work for old watches, less get broken when we have good teacher. Thank you!
@watchrepairtutorials8 күн бұрын
Thank you my friend in Finland. You are absolutely right.😜
@ETERNATICK8 күн бұрын
I've learned a terrific method for adjusting the pin gap; previously, I used a little screw driver for that purpose. Thank you!
@watchrepairtutorials8 күн бұрын
I hope it helps you with this delicate adjustment.
@jergarmar8 күн бұрын
How does the length of a mainspring affect its performance? The width and strength are pretty intuitive, so if I get that wrong I should be able to troubleshoot it. But if I use this formula for an unknown movement, and the mainspring ends up being significantly longer or shorter than the original, is there a problem I might run into, or a particular symptom I should look out for?
@watchrepairtutorials8 күн бұрын
The length is power reserve or how long the watch will run before stopping. The formula will get you close to the length, but obviously it matters what's available to buy. If I had to error on the shorter side. Toolong will result in too little amplitude in most cases.
@williamking60198 күн бұрын
Grreat job thank again always great and helpful info that no one tells u 👍
@watchrepairtutorials8 күн бұрын
Glad to help glad to be here William.
@lyutsin218 күн бұрын
I am careless with watches. I just don't know how to stop myself from bumping my arm into stuff and scratching my watches. I have an analog Casio watch that in the previous 24 hours somehow i got a deep scratch in the face of, near the edge. I don't have any tools; as of today my ability to fix watches is approximately zero.
@watchrepairtutorials8 күн бұрын
Personally, I wouldn't worry too much about it as watches are meant to be worn and It's hard to keep them pristine.
@321-Gone8 күн бұрын
Question about shaky hands- What strategy do you use to work on hairspring adjustments and other sensitive parts? Or can you drink 4 cups of coffee and still have steady hands like a superhero?
@watchrepairtutorials8 күн бұрын
Well, I can tell you that working in a comfortable position helps greatly. Working under a microscope also helps with the ability to make very precise movements. No, i'm a two cup of coffee guy. That's it.
@VWatchie5 күн бұрын
The secret is to relax as much as you possibly can, mentally and physically. Check and relax your shoulders, then do it again and again.
@nunyabusiness90568 күн бұрын
Every watchmaking tool vid ever. "To make this simple tool go out and buy 5 tools." lol. Great vid but this is always a frustration with this stuff haha.
@watchrepairtutorials8 күн бұрын
Many people will already have files. You can always come up with a different method or material to make the tool. It really just depends on what your goals are. Hell a lot of people don't even work on movements with adjustable pins like these.
@nunyabusiness90568 күн бұрын
@@watchrepairtutorials Yeah, i was mostly just trying to be funny and speaking to my current situation (I have nothing you would need in that vid to make this thing or the other tools you've shown that i could use haha.). I also just happen to have a seiko 7006 that was my toughest repair and first vintage watch i fixed from total non runner that just happens to have those pins and it could perform better but I'm afraid to touch the things to lower the delta.
@watchrepairtutorials7 күн бұрын
@@nunyabusiness9056 we all have to start somewhere brother. The longer you do this the more tools you will accumulate.
@sonnymoorehouse19418 күн бұрын
Awesome video Alex !!!!!
@watchrepairtutorials8 күн бұрын
Glad you enjoyed it
@sonnymoorehouse19418 күн бұрын
You aneal the mainspring ?
@watchrepairtutorials8 күн бұрын
Tempering and annealing are basically the same except that tempering is done at a lower temperature with faster cooling.
@sonnymoorehouse19418 күн бұрын
@@watchrepairtutorials Working with metal ive always called it anealing when I heat hardened steel to soften it so I can work it. then after work is complete you heat and quench steel to restore hardness then finish by tempering to straw color. Thats how I was taught as a child. been doing it since I was five.
@sonnymoorehouse19418 күн бұрын
@@watchrepairtutorials Anealing is softening hardened steel so you can work it. Tempering is re leaving stress in the metal from hardening process but not removing the hardness.
@watchrepairtutorials7 күн бұрын
@@sonnymoorehouse1941 I am definitely not a metallurgist so I stand corrected. I am just showing the way I was taught to make this.
@sonnymoorehouse19417 күн бұрын
@@watchrepairtutorials Im only sharing what I was taught. other kids played with toys. I used torches and saws and grinders to make things.