Пікірлер
@devinadams-barton5924 Күн бұрын
THANK YOU!! Seemingly the same as everybody else in here, had my wipers acting up after a battery replacement (that was ALSO crazy) Your video is detailed, to the point and perfect for ‘step by step follow along’ DiY’ing. Thank thank thank you
@ericmitchell4793 Күн бұрын
Excellent! Thank You!
@johnsterne178 2 күн бұрын
This is an amazing video and I probably would have had to take this to a shop if it didnt exist. I did fine with just a regular socket set. Took about an hour just from sweating and having to let my fingers rest from cramping up.
@414juggaloKO 4 күн бұрын
What if you don't have the factory code? I just got one used and it's not in the manual. And I only got 1key. So I can't do that trick to find your code
@HowToEscapeDIYTipsandReviews 3 күн бұрын
Hey there- if you don't have the factory code and you have a '13-'19 Escape, you can find the code located on a sticker on the BCM, which is a fuse/connector/computer box located in the passenger front footwell behind the glovebox. We did a video on finding the code and it doesn't have anything to do with only having one key so you should be good to go there - hope this helps! Video tutorial link is here: kzfaq.info/get/bejne/nMWDpqyYuLfRiX0.htmlsi=lVloNEGNn7dLlvSX
@Manuel.h.g 5 күн бұрын
Can i install bigger tires than car recommend cause when I'm driving on the highway the speedometer show more speed than my phone's gps speed
@luisamador8511 5 күн бұрын
Muchas gracias me fue muy útil no hablo inglés pero explicas tan bien que el idioma no fue un problema muchas gracia y éxitos
@TBee03 6 күн бұрын
as someone who is literally just a girl, thank you.
@jimjewell9438 6 күн бұрын
You don't have to remove the wipers for battery access. I have changed the battery on my daughter's 2013 Escape twice and have never removed the wipers. People are making this more complicated than this needs to be. And since I have never removed the wipers I have never needed to calibrate them.
@gp_thats_it 6 күн бұрын
Easy instructions to follow and I was able to do this by myself one handed . 👍🏼👍🏼 Keep up these videos! I still have my 2015 Ford Escape 😊😊
@HowToEscapeDIYTipsandReviews 3 күн бұрын
Awesome! Glad you got it done! Thanks for the encouragement and keep that '15 running! Our '13 just hit 170k mi and we're hoping for some more out of it!
@bryancotton7279 7 күн бұрын
So if I'm pulling assemblies from the junkyard, it seems like I could take a holesaw to the bumper cover and skip a lot of that fun.
@HowToEscapeDIYTipsandReviews 3 күн бұрын
oh yeah! That would definitely save you some time haha! I'm sure you already thought about this, but just gotta be careful to not press too much into the bumper cover as you wouldn't want to cut into the lamp housing mounting features as well- hope you can find a good one for a steal!
@RK-rx7jk 7 күн бұрын
Very helpful. I appreciate that and I have my lovely wife help me. Thanks.
@HowToEscapeDIYTipsandReviews 3 күн бұрын
Well done!
@elishamorgan 8 күн бұрын
The 2013 Ford Escape has got to be the worst designed vehicle I have ever had the displeasure of interacting with. Thanks for your vid.
@HowToEscapeDIYTipsandReviews 3 күн бұрын
Yeah... (sigh)... it certainly has its issues. Not a bad little car when everything is going well, but unfortunately it's not the majority of the time :/ Thanks for taking the time to comment and good luck!
@isabelllawless7950 8 күн бұрын
Thank you so so much for the video. It helped a lot.
@HowToEscapeDIYTipsandReviews 3 күн бұрын
Awesome! Thanks for taking the time to share and hope it's a smoother ride now!
@vanessafarias3244 9 күн бұрын
Thank you. I’m sure if I went to a car dealership or mechanic I would get reamed and they would do exactly this and charge me a butt load of money so thank you so much.
@HowToEscapeDIYTipsandReviews 3 күн бұрын
Oh man, sorry for the delay in response here- did you end up getting it fixed DIY?
@johnabbottphotography 10 күн бұрын
I have a 2016 ford escape se that has about 165,000 miles on it. I guess that's when the trans is set to explode? Anyway, when its cold, it seems to work. As it gets warmer, 1st gear doesn't want to click in right away. Moreover, there seems to be a mechanism that puts the throttle in idle. Any trans folks have any ideas?
@HowToEscapeDIYTipsandReviews 3 күн бұрын
Oh man, so the 165kmi is just when ours went out as well haha. Unfortunately there have been others who have had it go sooner and later, but it's just this design of transmission that really stinks :/ 6F35 6 speed transmission if you'd like to look up some info about it.... My suggestion would be to try a drain and fill to get some newer fluid inside and then check the fluid level with the leveling port on the driver's wheel well. If it's still doing that after the fluid change and up to temp, it could be something more serious. In terms of the mechanism mentioned and it being in idle, are you saying that you'll be in Drive and it will go into Neutral? If so, it could be your shift cable bushing failing and your drive selector lever on the top of the transmission could be out of sync with your shift lever in the cabin. Please respond when convenient- very interested to know a bit more. Thanks!
@johnabbottphotography 3 күн бұрын
@@HowToEscapeDIYTipsandReviews Yes... I'll be in drive, and then suddenly, the car drops to neutral. I had a trans guy look at it, and he told me that it needs a complete rebuild. ($5,700!) I'm getting a second opinion tomorrow. So brutal.
@trishettelee6188 10 күн бұрын
Where do I get the fender vent?
@chrisolarry8848 11 күн бұрын
Thanks for this
@HowToEscapeDIYTipsandReviews 3 күн бұрын
Glad it helped!
@yungtremor7973 11 күн бұрын
Had to do a brake flush on a 2017 Chevy Bolt, this worked perfectly. Thank you!
@HowToEscapeDIYTipsandReviews 3 күн бұрын
Excellent!
@user-ht4uw3ss5c 14 күн бұрын
Very helpful! This was the fix I needed on my 2016 Escape. Thank you!
@HowToEscapeDIYTipsandReviews 3 күн бұрын
Great to hear!
@hinglemccringleberry4665 14 күн бұрын
On a 2011 ford edge the camera was upside down, I did the master reset first and it didn’t work so I unhooked the battery and that didn’t work. So for the hell of it, I tried the master reset again and surprisingly it work.
@HowToEscapeDIYTipsandReviews 3 күн бұрын
Oh awesome! Yeah it's hit or miss sometimes, but glad that worked and you didn't need to get the new camera assembly! Some nice cash saved hopefully!
@rory-zr1tk 16 күн бұрын
Thank you so Much for posting this i need to replace my radiator on my 2014
@HowToEscapeDIYTipsandReviews 3 күн бұрын
Nice! Thanks for taking the time to comment- hope the job wasn't too bad!
@SamuelThadius12 16 күн бұрын
When I drive mine I always have this shown just cuz I love looking at which tire is being used 😂
@HowToEscapeDIYTipsandReviews 16 күн бұрын
It is fun isnt it?!
@SamuelThadius12 16 күн бұрын
HONESTLY THE BEST VIDEO THAT EXPLAINS THIS! ALMOST BOUT THE ENTIRE SWITCHER BRAND NEW UNTIL I LOOKED UP & SEEN IT HAD A RECALL!
@RussSchampers 16 күн бұрын
"Hope you never have to do this" - and here we are :)
@HowToEscapeDIYTipsandReviews 3 күн бұрын
Ugh! Oh nooooo haha how did yours happen? Were you successful with the repair?
@DougFrazier-zt3vv 17 күн бұрын
Thank you
@HowToEscapeDIYTipsandReviews 3 күн бұрын
Sure! Hope it helped!
@pfcande 17 күн бұрын
Appreciate you, bro
@HowToEscapeDIYTipsandReviews 3 күн бұрын
Sure thing! Hope it was helpful!
@SpenceStan888 18 күн бұрын
Perfect info, especially after I opened the wrong 'over fill' plug on the 1.6L Escape and let out too much fluid. found this video and the 10mm Hex was exactly what I needed.
@garybennett3044 19 күн бұрын
Mine just did that and had to be towed home 50 miles thought it was going to be the worst transmission but you tubed it and found you thanks a whole bunch for that video. Gary Bennett 🎉
@HowToEscapeDIYTipsandReviews 19 күн бұрын
Woohoo!!! That rocks! I HAVE had to replace my transmission, so I know the sinking feeling that you're expecting something heavy like that- glad this was all it was!
@brianmatthew582 19 күн бұрын
Ford has definitely let us all down on these eco boost and junk transmissions . I’m srry to say I’m leaving ford
@TJ-ie9qo 20 күн бұрын
Are the plastic snaps replaceable? Some of mine are busted. 4:30
@mykolahamarnyk6871 20 күн бұрын
Дякую за українську ❤
@mykolahamarnyk6871 20 күн бұрын
I ordered the same camera on AliExpress for $25, and it works perfectly for me! I can give a link to the camera
@stunin_chriss1074 10 күн бұрын
Link?
@thekingofprotoss4376 21 күн бұрын
So if i have a spare key the car came with, i dont need to order anything from toms right? I just use the spare and then clear the mykey?
@goingunder1313 21 күн бұрын
I dont have MyKey settings. Only Driver Assist, Vehicle, and Display. I bought this car used, its a 2018 Ford. The Volume Key limit is set TO TEN. I'm beyind frustrated. Nowhere has the right info to help me get this removed, not even the dealer.
@michaelkloeckner6353 22 күн бұрын
I did allot of towing with my 2016 2.0, so I changed the trans fluid every 40,000 miles. At a 157,000 miles I traded it in for a 2023 Escape with the 2.0. This 2023 is full of technology which I am still figuring out. I am reading on the Escape 2023+ Facebook group that Ford is not going to build anymore Escapes after 2024, so maybe getting a lease turn in, in 2025-2026 would be a great deal.
@yashbooputh 22 күн бұрын
Mann fkkk FORD worst company ever
@MichaelRHead-zv2zf 23 күн бұрын
I have replaced turbo, wastegate and solenoids. Still getting code. I would be grateful for any help you can give im at a loss
@karendiaz215 23 күн бұрын
Thank you!
@anarky4321 24 күн бұрын
not only was the battery replacement a nightmare but the wipers got kicked out of sync too....who designed this car jeez
@Torby4096 24 күн бұрын
Thanks! Was easy. Did not even need a screwdriver. Just hand.
@whatuptone 24 күн бұрын
Great
@petyamokvwap9139 25 күн бұрын
How to escape the Escape: get rid of it
@SamuelThadius12 16 күн бұрын
Every car will last as long as you MAINTAIN IT! When ppl neglect the car or even be cheap when needed to repair something, that’s when it become an issue
@petyamokvwap9139 16 күн бұрын
@@SamuelThadius12 this is simply untrue. There are several examples of bad design, bad manufacturing, bad quality control. Not all vehicles are created equal.
@mikebenoit3184 25 күн бұрын
Thanks!
@ericleblond7517 25 күн бұрын
Thank you I was surprised to see that it’s only 20 $ I’ve been driving a couple years without it. But I will definitely do it now 😎
@lavelleprice3793 27 күн бұрын
Can I use atf fluid?
@markm5287 28 күн бұрын
This is an older video, but I'll point a couple things out.... first off, you need to apply more silicone than that, and not just "in" the holes. You'll push that through with the screws. There needs to be some on the mating surface around the screw between the feet and the roof "around" the hole. These things are notorious for leaking. Also, you need to clean and inspect the whole channel between the feet. There is a hard sealant that has been painted over at the factory (there is a roof joint in that channel). Also known for happening is for that sealant to crack due to body flex and expansion/contraction, and you can usually see the paint cracked too. Inspect well, as you may need to reseal the entire channel, and you want to do that BEFORE adding the 3m tape covers.
@SupremeRC 28 күн бұрын
Thanks for the data, I have the 2.0 ecoboost and I'm finding that after changing the solenoids on the bottom side with the brand new turbo and the top side with a new solenoid I've changed other sensors. Just not the ones that are connected to the throttle body because I'm under the impression on the 2.0 ecoboost it is a all-in-one unit. Any advice for me for my next step I would have greatly appreciate it
@pan-da-bread5783 29 күн бұрын
I have a 2014 ford escape titanium, would this work for it too?? I didn't know if there was a difference. I have the tools, need to buy the bushing. These cars are so difficult to work on with so much going on under the hood. You made this look straight forward and pretty simple! Appreciate this!
@msmoker37 Ай бұрын
I was hit by a deer and dented my door. I was hoping to remove the interior door and pop the damage out. It doesnt look like that's going to be possible. Is that another barrier?