OK, can you advise me on how to put that spring back in place? It popped out and I can't figure out where to situate the longer end.
@ssmonte8738Ай бұрын
I believe the long end just sits in there. When the handle and the body are laying flat during the repair there really won't be any tension on the spring. It only develops tension when the handle moves perpendicular to the body.
@beckymiller5907Ай бұрын
Thanks for sharing this wonderful project! Excellent job on the edging, that should be easy to mow around.
@michaelschnierl2091Ай бұрын
thankyou for going slow and being detailed. this was the perfect video for fixing an annoying problem.
@xiraboltАй бұрын
My dryer must've been pretty old, the tensioner was just a smooth piece of plastic -- no roller of any sort. Got you beat on the loot though, $2.53 and a foam earplug. Thanks for the video, wasn't sure how to get the rollers off. My felt strip was the big problem, wore out to the point there was metal-on-metal and the drum didn't want to spin even with an intact belt.
@mistykarson-py9xz2 ай бұрын
I appreciate this video! Easy step by step and got my dryer fixed with only spending money on the parts. Thank you!
@Lpartain762 ай бұрын
Not one skinned knuckle or thrown wrench! Well done.
@ssmonte87382 ай бұрын
About a year after this video I had it apart for a different problem and sliced my thumb open to the tune of 6 stitches. The heating element housing is quite sharp.
@ExclusiveHunting2 ай бұрын
With this work with the factory master cylinder?
@davidworth76212 ай бұрын
Great instruction video. Could you do a video describing how to use the ALU function? Could you do a video describing how to use the OPT (optimisation) function?
@belindahutchings94203 ай бұрын
Thank you for this! Once I got going, it was pretty simple. Putting the old machine back together? No so much. It's very old and the front clips have corroded. :( It runs, but I'm going to have to find help to re-assemble it.
@awesomevideos8253 ай бұрын
Great instructional video although I didn’t need to buy the new parts I just took it apart and greased everything up👍
@belindahutchings94203 ай бұрын
OK, just ordered the parts...gonna give it a try. :)
@juancarrera2413 ай бұрын
A very easy steps to follow. Thanks
@madteyahoo4 ай бұрын
Thank you.
@abriseno714 ай бұрын
youre about to sever your artery. Use a vice
@amandamcdermott88675 ай бұрын
Thank you.
@Being_Joe5 ай бұрын
Hommie you make this job look easy. Going to save this video, order the parts, and do the job myself.
@anthonygodoy90506 ай бұрын
Great stuff I’m a FOMOFO myself dig your content cheers on keeping it Real 🤙
@Huero8056 ай бұрын
YOU should have ran it so we could hear the problem maybe we can relate to it??
@kellymchenry19446 ай бұрын
I know there’s a coil over bag to replace the stock shop that may work just as well in the front
@SajmirLusha7 ай бұрын
Thank you for your Explanation Sir. All the best
@claypalmer93387 ай бұрын
This was the only video that actually showed the whole process of opening the dryer. I had no idea where to start.
@charlesdowell45057 ай бұрын
What size tires are you planning to use?
@williamb4548 ай бұрын
I'm going to replace the tensioner wheel, cuz it squeaks,should I replace the bracket and belt while I'm at it, its a old maytag???
@Rod-ej8hz8 ай бұрын
Wow really good video . Straight to the point . Fairly easy job .
@yikezzbruhh65558 ай бұрын
You saved us a band, I appreciate you my man🫃🏼👍🏼
@LarryPattersonBlue8 ай бұрын
Thanks so much you saved me allot of money your video is great. I have gas but all of it works even for mine. Thanks
@jasonamato21538 ай бұрын
It took me about 10 times longer than it took you but following the instructions I've fixed what sounded like a dying Kenmore. Great video.
@ihlefabrications99249 ай бұрын
Nice job!!!
@user-fd3uv7ns1z10 ай бұрын
Does anyone have a video on how to do alloy balancing with this machine
@ssmonte873810 ай бұрын
Just the press of a button to select where you want to put weights if using tape weights.
@user-fd3uv7ns1z10 ай бұрын
@@ssmonte8738 it asks for different measurements
@ssmonte873810 ай бұрын
If I spin a wheel and then select different wheel types it changes the amount of weight based on which setting I'm using.
@Rainabobayna10 ай бұрын
I know this is two years old but I wanted to thank you anyway! You helped me fix my dryer today 🤠
@crisz1288310 ай бұрын
I have the same machine but I have an issue with it not stopping from spinning after it balances.. I can use the foot brake but is a pain
@ssmonte873810 ай бұрын
I had an issue with the brake seeming to be on all the time when I first unpackaged it but NAT was very responsive and helpful to get it taken care of.
@crisz1288310 ай бұрын
@@ssmonte8738 ok, who is Nat?
@ssmonte873810 ай бұрын
@@crisz12883 National Auto Tools
@lostsoul960610 ай бұрын
I think you should’ve bolted them in from the bottom of the a arm, not drill out and put them in from th top
@Games4lyfe10 ай бұрын
This was perfect thank you
@leedawgdds11 ай бұрын
I'd love to see a demo of the tire changer. Really liked the demo of the balancer. Best I've seen on this machine. Thanks for takin the time!
@ssmonte873811 ай бұрын
I'll make something sometime, thanks for watching!
@classicosdelujo6252 Жыл бұрын
Great video, excellent cámara work, super helpful Thank you!!!
@Mr.Crosbyy. Жыл бұрын
My ol lady said she was goin to ask about the dryers and the problem… I went out and found the wheels for the drum, and I came home. She had a brand new Samsung washer and dryer. 😭 and I pulled the 38$ parts out of my bag. We ended up repairing it and selling a “like new” Kenmore 400 series 😏
@Mars-77 Жыл бұрын
I've replaced belts and rollers before, but I've never heard them squeak before. It's more like the sound of tennis shoes rolling around inside.
@armyguyz00 Жыл бұрын
Hello, I’m very interested in buying this same tire machine and balancer. Have you had any issues? Would you recommend?
@javierjp380 Жыл бұрын
Where can I buy the replacement parts?
@ssmonte8738 Жыл бұрын
Amazon, ebay, ereplacementparts.com, etc.
@tylerconley9412 Жыл бұрын
How did you mount the hood I can’t figure it out. I don’t have any manual or instructions
@ssmonte8738 Жыл бұрын
Do you have hardware? I remember it being an Allen bolt. I could try to take some pics tomorrow.
@joshuacartagena5450 Жыл бұрын
I just intaled a new spectra brand fuel tank on my 64. Very much the same as in this video. And wow, it burbs at the gas station so much and It wont hold more than 5 gallons. Oh, and my gage does not work. HELP!!!!!!!!!!
@ssmonte8738 Жыл бұрын
I haven't had any issue like that. My new sending unit isn't that accurate but I'm used to it at this point.
@joshuacartagena5450 Жыл бұрын
@@ssmonte8738 Thanks for replying. I also have a new sending unit. But I got to say, this sucks! I guess the hunting to this issue continues. I did plug the breather. I did check the fuel hose connected to the fuel line, and no cracks. So I know it’s not sucking in air. Welp, back to the drawing board.
@ssmonte8738 Жыл бұрын
Turn the key on and then check gauge with the sender unhooked and with it grounded with a jumper wire.
@joshuacartagena5450 Жыл бұрын
@@ssmonte8738 ok, so basically disconnect the wire to the sending unit and the turn the key over to see if the gauge needle turns…… correct?
@ssmonte8738 Жыл бұрын
Yep, no need to have it running, just key on and see if the gauge moves with the wire disconnected and with it grounded.
@craigholland5516 Жыл бұрын
Thank you very much. Just fixed my dryer. I appreciate it.
@cmikesmith664 Жыл бұрын
This fixed my Kenmore 400.
@talktodanny Жыл бұрын
Fixed it today with your help! Would not have been possible without your video many many thanks!
@thomasrussell5382 Жыл бұрын
Nice video. I’m doing the same Brake set up on my 66 galaxie 500 xlconvertible big block with Sanderson headers. I have the same problem small garage
@jennifercorbin3533 Жыл бұрын
I was just able to replace the wheels and belt on my dryer on my own - thank you so much!!
@mattdaugherty7865 Жыл бұрын
03:05 Tennis balls?
@2a0wen Жыл бұрын
I randomly selected a dryer repair kit online in hopes that I could fix (zero experience) my Kenmore dryer that sounded like it had boots in it. The bottom drum roller had so much hair wrapped around the axle that it could barely spin. The drum wore a flat spot in that roller, but it would spin about every three seconds, and the drum would thud on the flat spot. This video came in handy as I forgot how to route the belt around the tensioner. Thank you for sharing it.