thankyou for going slow and being detailed. this was the perfect video for fixing an annoying problem.

This was the only video that actually showed the whole process of opening the dryer. I had no idea where to start.

I appreciate this video! Easy step by step and got my dryer fixed with only spending money on the parts. Thank you!

With no experience whatsoever, this video helped me fix my dryer and saved me hundreds of dollars. I was ready to buy an new dryer until I found this. Many many thanks!

I randomly selected a dryer repair kit online in hopes that I could fix (zero experience) my Kenmore dryer that sounded like it had boots in it. The bottom drum roller had so much hair wrapped around the axle that it could barely spin. The drum wore a flat spot in that roller, but it would spin about every three seconds, and the drum would thud on the flat spot. This video came in handy as I forgot how to route the belt around the tensioner. Thank you for sharing it.

It took me about 10 times longer than it took you but following the instructions I've fixed what sounded like a dying Kenmore. Great video.

Just fixed my old squeaky Kenmore. Not sure I would even have attempted it without this video. Following your instructions, I had it done in under an hour. THANK YOU for taking the time to post this!! 👍👍👍

I know this is two years old but I wanted to thank you anyway! You helped me fix my dryer today 🤠

I used this as a guide for my Kenmore series 110, and it was 100% SPOT ON what I needed, accurate & easy to follow. I owe you a beer sir..

Thank you for the video. I thought we were going to buy a new dryer. We saw your video, ordered $20 in new parts, with $10 shipping. We followed your steps and our dryer is whisper quiet again.

Just wanted to say thank you. This fixed my dryer and got us back in business.

Very good video! To the point, good camera work and no BS. This guy tells you exactly what you need to know without attempting to entertain. Refreshing and informative. Nobody works on a damned dryer for ENTERTAINMENT! If you do, you need a new life. Thanks again, b

Fixed it today with your help! Would not have been possible without your video many many thanks!

Excellent video! Many thanks! I’m a big proponent of older units, properly maintained, they’ll last forever. I cannot say the same of the newer, fancy models. They don’t make em like they used to. Thanks for helping me keep mine goin!

Thank you for your Explanation Sir. All the best

Many thanks for this one. The door switch clip was really making me mad on this one. The drum was also backwards. I appreciate the time you took to show how easy it is. Was about to throw in the towel!

Wow really good video . Straight to the point . Fairly easy job .

Hommie you make this job look easy. Going to save this video, order the parts, and do the job myself.

I was just able to replace the wheels and belt on my dryer on my own - thank you so much!!

Excellent! I replaced the belt/drum pulley assembly on my dryer about 10 years ago due to a broken belt; it has since developed an occasional squeak. The roller wheel assemblies are original and were only shop-vac'd to remove dust during the pulley replacement. Looks like I'll be following your procedure to address this issue. Good work on the video,

Thank you very much for taking the time to make this video. I fixed my dryer after learning how to do it from you.

Thanks so much you saved me allot of money your video is great. I have gas but all of it works even for mine. Thanks

Great video. I thought my belt broke. Found out it was the pulley on the motor. Messed up the belt and found the tensioner on the floor on the other side. Wow

Great instructional video although I didn’t need to buy the new parts I just took it apart and greased everything up👍

My brother-in-law disassembled his dryer to replace the belt. The tension pully fell off and he had no idea how to put it on. It only took a few minutes viewing this video for me to reassemble his dryer correctly.

Thank you soo much... took it apart and waiting for parts. I hope I can get it back together 😂 Girls will rock if I can do this 😊😂 thanks again

My dryer must've been pretty old, the tensioner was just a smooth piece of plastic -- no roller of any sort. Got you beat on the loot though, $2.53 and a foam earplug. Thanks for the video, wasn't sure how to get the rollers off. My felt strip was the big problem, wore out to the point there was metal-on-metal and the drum didn't want to spin even with an intact belt.

Thanks a lot for this vid, just did this work this morning and it went smooth as silk thanks to you.

Thanks for the help. My dryer is back in business and only cost me 22 bucks!!

Worked Perfectly. Thank you for posting this.

Thank you for making this video 💪🏾...I changed fixed my dryer with confidence yesterday 🙌🏽...#DIY #girlsrock Thank you!!🦾

Thank you very much. Just fixed my dryer. I appreciate it.

Thanks for sharing ! 😊I just fixed our dryer !!

A very easy steps to follow. Thanks

Not one skinned knuckle or thrown wrench! Well done.

What an amazing video. My tensioner popped off and I'm about to open her up tomorrow...Thank you sir, if you're ever in the Saskatchewan, Canada area - I owe you a beer...Or 12!

OK, just ordered the parts...gonna give it a try. :)

Great video, excellent cámara work, super helpful Thank you!!!

Thank you for this! Once I got going, it was pretty simple. Putting the old machine back together? No so much. It's very old and the front clips have corroded. :( It runs, but I'm going to have to find help to re-assemble it.

This fixed my Kenmore 400.

Awesome video! Doesn't seem too daunting anymore!

thank you very much for your video I did not know how to install the tensioner I learned there thanks again

Thank you! Helped so much!

Excellent tutorial for both belt replacement and squeak fix. I have that squeak issue too. This is the only KZfaq video that addresses that fix. Would you recommend adding a little electric shaver oil to the roller shafts? I'm sure the shafts on my dryer are just as dirty as yours were. This is my first attempt at fixing a Kenmore dryer belt. It looks super easy to do. I just hope to fix the squeak too as it drives me nuts hearing it.

Thanks for the excellent video.it has helped me a lot.

Great video, just did mine thanks!!

CAUTION! First, several inexpensive makes/models are covered by this video; a lot of them are laid out the same. Mine's a Maytag. Once you have all the parts in and your belt on , do NOT roll the drum by hand in opposite direction of the way it's designed to turn. Mine runs counter-clockwise, (I'm sure all do) looking from front. After I got the belt where I wanted it, checked everything, I rolled it once more but in the wrong direction and this caused my belt to run off of the tensioner. I didn't catch this before putting on the panel and turning it on. I shredded my belt but not too badly. Made a bad noise. Took a short while to figure out. I don't know if other makes/models do this, but I wouldn't test the theory.

amazing video. Thank you!

This was perfect thank you

My ol lady said she was goin to ask about the dryers and the problem… I went out and found the wheels for the drum, and I came home. She had a brand new Samsung washer and dryer. 😭 and I pulled the 38$ parts out of my bag. We ended up repairing it and selling a “like new” Kenmore 400 series 😏

Had a squeal on Whirlpool. Discovered it was one roller. I ordered a replacement kit, but in the mean time I lubed said roller with WD-40. Worked like a charm. No more squealing. Just a note for those who may need a quick fix due to no parts on hand.

GOAT of dads

Great great video. From start to finish. Thank you and ur videographer. (Son or wife). Lol.

Thank you.

I've replaced belts and rollers before, but I've never heard them squeak before. It's more like the sound of tennis shoes rolling around inside.

thank you

Thank for the video where can I bye the seal of the drum please

That was a perfect repair demonstration except curious why no high-temp grease on the wheel spindles? I understand grease can attract dirt but I think the school of thought could go either way as far as how fast they wear out. Is the tub light on order? Subbed!

Thank you for the instruction! After installing the new rollers/belt/idler pully we are still getting a thumping noise. Checked to ensure rollers were spinning and drum was in place, looks ok and spins easily by hand, but still a thump thump. At a loss what is causing it?

I'm going to replace the tensioner wheel, cuz it squeaks,should I replace the bracket and belt while I'm at it, its a old maytag???

I have the exact model. I'm going to order the parts now. Do you have Amazon link to the products?

All the belt videos I watch say put the ribbed side against drum. My belt is ribbed on both sides. One side is smooth and the other is abrasive, but both have ribs. Which side goes against the drum?

Yo is this an electric dryer cause I didn’t see the burner in there. Isn’t it located on the left side of the dryer because there wasn’t anything there. Just saying.

Same as a whirlpool

Where can I buy the replacement parts?

Definitely need a little trigger warning for the fast forward sounds, wasn't expecting war zone sounds.

Good video. I noticed several other folks put the drum on and then the tensioner pulley. You put the pulley in first. I like your method best since there’s so little room to navigate once that drum is sitting in there. It’s a minor observation but I was curious why the big repair shop videos all seem to do it the hard way? Any thoughts? Thanks for the video.

03:05 Tennis balls?

what did Mom spend that 52 cents on?

YOU should have ran it so we could hear the problem maybe we can relate to it??

My dryer sounds like a horror movie screeching/yelling and my trusty repairman is booked up for 3 weeks. Either I'm replacing everything suspect or buying a new one. It's gotta be 15 years old now and tired of frequent repairs with set.

This will be the third time in a year having to fix this piece of shit.

You saved us a band, I appreciate you my man🫃🏼👍🏼

Thank you for this video! This video saved my money and time in fixing my Kenmore. I bought a kit from a parts place. The kit is: OEM Part #4392065

Good looking out my friend. I'm starting my moms 110-71202012. Cheers!

Thank you.

Thank you.