i went 35mm out of trends , felt comfortable sitting as im more upright , but when im up and ripping , handling felt too fast and the front felt too liight . i prefer 50mm so much more

hello i have a yt capra in size large with the reach at 467mm and bars at 800mm.Do you think i will make a mistake going from 50mm stock to 40mm cus i can feel i am already sitting close to bars i am also 6 feet and if i go to 40 i will sit even closer.Should i stick with the 50 cus i see a lot of people going back to 50 after trying 40

These mtx pads get grooved easily by grit I found the cooma pink ceramic are much harder they don't groove that easily...

What are you using in your tires

Spot on, solomon is very weird & degenerate now…

Is that a Medium? And does this bike use a proprietary heaset or can you use any headset like cane creek?

What fox coil do you have?

I tested both today and Ambush 3 is lighter, better fit and overall Tactic 3 cross/trail oriented. Tactic 4 is more trail/enduro. I liked Ambush 3 over 4. Instead of Ambush 4 I would choose Tactic 4 which is more similar and better fit for me (more rounded). I bought Tactic 4 finally. Ambush 3 was much more expensive. From all 3 Tactic was best fit and value for money. If I could spend more I would buy Ambush 3. Much lighter and little more comfortable than Taril 4.

Hello, do u know about temperature range ? Can I wear this shoes in winter

I've been using Rimpact for 2 years now and no issues. Just bought another set for my enduro e-bike.

Best one-piece stem is the BikeYoke Barkeeper.

Looking for your 1 month follow up but I see you had to return these. So Solomons vs Cloudtrax... I just bought these exact same Cloudtrax. I'd guess you don't really recommend since you had to return them. Any similar Solomon you'd recommend? I love how light these Cloudtrax are and am looking for waterproof (live on vancouver island)

Hi, I’m going to Svalbard next year. I’m looking for boots where I can wear in the snow, any recommend please? 🙏🙏

I really struggle with long stems. With a long stem, your entire handlebar turns in a circle, so your shoulders move with it as you turn. Let's use a silly example: Let's say your stem is 1 meter long, and you turn left. Where does your handlebar go ? 1 Meter to your left. I bought a new bike, and nobody pcould tell me why i struggled so much with my steering. One day it just clicked. I swapped the bike for a bike with a shorter stem ... and i even chahged the stem on that bike for a shorter stem. What a difference 😮 I could've do skinnies with the long stem. With the short stem i can.

I’m so relieved to see this video. Now i know what to do with my nomad V4. Thanks

Hey man quick update i went with a longer stem length and couldn't be happier with the out come

Great video mate! Unfortunately came across this a tad too late.. just turned my Nomad v5 into a mullet last night but instead of getting a shorter fork we went with a 180mm dominion for a 29er.. so far it felt good but I have not tested it on the trails yet, after viewing your vid I think its gonna be a challenge to climb uphill 😂😂😂

thank you. I heard Cy from Chotic bikes talking about same subject and he sad that if you have very slack HTA and short stem bike becomes too nervous

I am from the hilly region where I use a reverse 90 mm stem. You can go faster in hill incompare to the rider with small stem. Only downhill is poor in longer stem.

😂 Крута історія!) Очікував що дівчина прокинеться) інше неочікувано)

I'd be worried about how strong it is.

I beg to differ, Fox 36 factory and the diamond. I ended up sticking with the dvo. Way more supportive than Fox, better fork over All. And that's coming from a skeptic, I never heard about these forks I just happened to buy bike with it. So I had my doubts about it that's why I got the Fox One. But after riding the diamond it really grew on me is a better fork

Buen video Pocho

Round head ? Or more oval ? Thanks

I got an ethirteen one that specifically had my Pivot Switchblade cleared in the list of bikes they tested it on. No matter which spacer configuration I used it would either rub on the chainguide or the bashguard itself. As a compromize I was offered a 50% refund, and now I just run it bashguard only(simply just remove the chainguide). I've just been a bit hesitant to seek any new solutions after that ordeal. I have to say that I'm not really sure this thing will be it either. #1: Why no adjustment on the mounting holes like everybody else uses given it is not made for one specific bike? #2: It looks like you easily will get more chain rubbing noises, which is a no go for me.

Should I get Ambush 2 or Tatic? If I don't need the eyeglass rubber flapper area for glasses inserts... Is Ventilation same for Ambush 2 & Tactic? Is MIPS same for Ambush 2 & Tactic? Please advise what advantages there would be to getting Ambush 2 instead of Tactic? I ride Primarily on road... Thanks For Video...

Im trying to order an adjustable stem so I can dial it in for me. I have a 2001 Stump jumper FSR XC Comp, I need to know the correct diameter of the stems so I can order one knowing it will fit. What is the correct size diameter to mount the stem on the bike? Is it 28.6mm or not? Does anyone know? I can't find it in manuals or spec sheets anywhere.

Ok, so I've yet to understand why people call a waterproof shoe or even boot "warm" All I wear is waterproof shoes and boots for the most part. None of them have ever been "warm" at all. Waterproof is to keep your feet from getting WET. Insulated is to keep you WARM. Ok, now I'm hoping these are worth their big price. I just ordered a pair. I guess I'll find out or I'll take them right back lol.

Currently running the HS2 rotors with mtx pads. How would you compared the 2mm galfer rotor against the HS2?

Nice video. So if I buy that shoes so I get the snow delivered with it?

Im 188cm 6'2 defenetly XL frame 29er!

So I’m 6’4 and I’m currently deciding between a XL or XXL on a Megatower. I have both long arms and legs so would it be more convenient XXL or XL in terms of comfort (My height fits between both sizes)

Great job explaining everything in detail, super helpful! Subbed.

Can't hear over the cheesy music

Am hoping to try a 50mm rise. My rise is 20mm stock.

My commencal meta TR 29 came with a 50mm stem. For a year I've been hearing people tell me "you NEED to try a shorter stem! It'll feel so much better!" I didn't care much to try, as I was comfortable with the factory setup. Yesterday, I found a SUPER cheap 35mm stem at a local store, so I thought I'd try it out; I could get a higher quality 35mm stem if I decide I like it. I DO NOT LIKE IT. My bike felt twitchy and the front end kept going away from me. I will be installing my 50mm stem back before my next ride.

Have you done the follow up review?

How are you liking that setup. I coincidentally just ordered the same rotors for my Code RSC - I already had a Gold MTX rear and Red MTX front! Best pads out there.. Ordered a fresh set to go with the new Shark rotors.

Are u still.using tjr groove wallet and if so how is it any issues with it at all how u feel about it

Just picked one of these up from an old dealer and really enjoying it. Do you know what the holes on the bottom side of the top tube are for?

Ambush 2 sucks donky balls. Worst idea for a helmet ever.

Did this help at all with any chain slap you were experiencing? My transition spire is pretty noisy, not sure if its the derailleur clutch or just how long the chain is for the size of the chainstay, heard this guide can help with that a bit.

The new ambush helmet visor design looks worthless.

Thank you for posting a thoughtful review! Gonna try cushcore- I’m all in on chunky trails and a smoother ride sounds good. Rear only or front and rear? Anyone welcome to offer thoughts.

music too loud

What's your head size mate? In CM?

The music is louder thn your voice!!!

Do you have still have a valid discount code?

Just squeezed a oneup bar (20mm rise) into a 77 stem. Had to use tire levers to open the stem up a bit (not recommended by manufacturer) and search for the right angle. Combined weight is 308g (35mm stem, uncut 800mm bar). Saved 120g to the raceface turbine stuff it replaced. Does that matter? No. But its cool

Just came across your channel, nice vid! Are you running a 2mm thick rotor on Shimano brakes? I have SLX 4 pistons and was considering 2mm rotors to have a quicker bite point. I'm also considering the MTX pads as well.