Hi I'm trying to connect I'm using thunderlaser's version of RDWORKS but in the "MODEL" tab at the top my Rudi board model isn't displayed im using RDC6445G when i use the normal version of RDWORKS it is showed but im used to using the other version, is there a way to add the model also you say to connect via internet input the IP into the control panel, any IP or your internets default gateway? cheers

I bought new laser tube, it's firing nicely but will not cut or engrave. I did a line test, at 85% power, the mA does not even go up past 7. What could be wrong?

Every time I send picture to my laser, I can find the file, but there’s no picture

Great job on the tutorial video but unfortunately the link to the documentation is no longer working.

Wealth of information, each of these series of videos. Very resourceful. Thank you.

these videos are priceless, but the software does not work as it been demonstrated. Maybe I should try to downgrade the version from v8.01.54

thanks for your videos. I just ordered a Chinese 80w laser like yours. I want to put an ammeter! How many watts or volts should I buy? Thanks for the reply

thank you for showing 👍🤟

Thanks for your video

I can't tell you how much this video helped me. I am in very stressful part of my life at the moment and every new bump on the road feels like too much to handle. You had me back up and running in no time with this and and my stres for the day is gone. Thank you.

What is difference between F8 and F0?

Awesome Video! The company i work for bought a used 150w 5' x 10' laser that wouldn't fire. after watching your video I traced the issue to the machine not having a water sensor. The wire for it was just coiled up under the machine.

Thank you so much for this video very useful sir, I have a rdc6445sz and I need replace for one who has ccd sensors to read registration marks

How to make password Rd controler dear

esta faltado tradução para português

How can i change x and y tab in inches from mm

Very information video 👍👍

Hello

How this error occurs .This was ok yesterday. y axis 105 instead of 100. I rectified this problem after watching this video. Thank you. Pls explain how this error happens.

I know this comment is very delayed feedback, but you’ve helped me tremendously with this, so I really really appreciate it! Thanks!

Hallo greetings from Greece. Cloudray Water Flow Switch Sensor HT-30 writes AC 0 - 110V can it works for k40 Laser 220 V machines? Thank you.

Hi. Silly question but is that just for acrylic ? Thanks. Great video

Thank you just go off the phone with you, thank you very much for the help. Keep posting videos like this. Awesome contents

very nice. Any info on the angled panel you used to install the controller and mA ammeter? 3D Printed?

Is there anything to replace the mirrors with a fibre cable made yet? Or something that does auto laser calibration

It is a great tool, but if you place a paper on the honeycomb base, secure it with magnets, cut the reverse silhouette, place the already cut shape in the hole, it will fit perfectly, and you will be able to engrave with perfect placement, and if you make several ones, it is so much quicker as you don't have to adjust every time

(typo in the title)

Great stuff Matthew!

Thank you Sir, this was aa big help!

What did you add along with distilled water?

Thanks a lot, can you share which pump I should buy ,I have k40 Monoport

Hola que tal, tengo un problema con ese modelo de red dot en 45°, cuando mando a cortar una pieza el láser también sale por la parte trasera de ese lente que refleja el dot, habrá alguna solución? Lo afloje y moví en varias veces y sigue igual ):

I got this same setup, along with the reci tube adjustable mount because my tube basically sits on the machine. The question is this... after i install the reci mount and this, how would i raise the height of the mirror on the y axis high enough to match? I imagine the same question appiles for the laser head as well...

Thank you for this clear tutorial

Thanks!

Hii! My husband and I have a co2 laser machine and a while back it stopped functioning properly and now it doesn’t stop lasering between paths. How can we fix this ? It’s a Katian USA

Thanks for the vid. I can't zoom in and out using the wheel on the mouse. Why do you think that is?

This is awesome, exactly what I was looking for. I will be ordering parts today.

Thanks for making this video. Very helpful. I love the console you made for the Ruida controller and the ahmeter! I may have to make one myself.

Hi, goodday.....a very clear explanation video. I followed the instructions and reset hwvr the temp goes to 21 then fluctuates between 21.5 and 21.9 although it was set for 18. How to correct. Thanks.

Thanks for sharing. I am changing the controller board of my 60x40 m.3 laser for a ruida 6432, but I am not clear about the driver configuration regarding the value to choose in pulse/rev. The motors are 0.9 degree nema 17. I would appreciate it very much if you could help me.

Hello, Thank you for the informative video. Are you familiar with the Leadshine drive model H2-758?

ciao potresti fare un video Come realizzare un'unità di impulso laser per macchina co2 per il k40 io ho una mks come scheda di controllo e dovrei mettere il pulse ,puoi aiutarmi per favore farmi uno schema ti ringrazio

Hi, i have Co2 laser with RD works . My problem is insted of 48in my x axis cut only 47in and y axis 35in only. How can i change it 48x36in

Hi Matt is there a way to convert a manual chain drive using this method?

Thanks for this video as i have just ordered my self this item but sadly i cant find the manual which you said was on the net do you by any chance have a link to it many thanks

good day...do you know where I can get test cards for my 100w Co2 laser (red and black) that uses rdworks program? I don't have lightburn on my machine and didn't plan on buying the subscription

Good morning I would like to know what to do if the co2 laser machine does not move on x or y

Good morning I would like to know what to do if the co2 laser machine does not move on x or y

What to do if the co2 laser machine does not move on x or y