Flyfans SU-27 FUNFLY
3:46
3 ай бұрын
ASSAN AG61 Gyro Install and Setup
8:04
FlyFans SU-27 Assembly
6:18
4 ай бұрын
F22 Shenanigans with LJ HobbyLife
5:03
XFly Model Twin 40mm F-22 Raptor
4:03
Пікірлер
@vrosi1963
@vrosi1963 Сағат бұрын
looks like you are running a 6s 4000 , for 4 min ? if you just Cruz
@Heli4213
@Heli4213 13 сағат бұрын
Great video!!!
@lewiemotorsports3616
@lewiemotorsports3616 15 сағат бұрын
Greased that landing
@SuperiorRadioControl
@SuperiorRadioControl Күн бұрын
I love this jet as well I've got about 10 flights on it but I ripped the landing gear out because I fly off extremely rough grass. Every other edf has done this as well. What can I do to possibly brace it up better?
@NoonzAirborneRC
@NoonzAirborneRC Күн бұрын
@ordeanmiddleschool thanks for watching! Honestly if you flying off rough grass I'd watch how much reinforcing you do. Reason is if too stiff it will just rip big or bigger chunk out the plane when the gear fail. Sometime I'm successful I can brace in on plywood aa a plate buy then again hence the risk of bigger damage ✌️🇺🇲👊
@dart2241
@dart2241 Күн бұрын
Hi. I bought a mig 15 recently. Loved your vids but did you ever do a vid of the landing gear and also the rudder mod you mentioned?
@dart2241
@dart2241 Күн бұрын
I've just read another comment on here re mods. My bad for not reading other comments first. Even if you didn't make a vid, did you do a rudder mod and was it successful. Im very interested to hear if it worked as I'd like to do one myself.
@NoonzAirborneRC
@NoonzAirborneRC Күн бұрын
@dart2241 rudder worked for landings and long flat turns. Personally wasn't worth all the worm. Landing gear worked great. Take a look at the AF mig 17 90mm I know more expensive than the small guy but it's a real good jet. You can see me flying the pics outta it on my ch. Just something to think about in the future! Thanks for watching! 🇺🇲✌️
@dart2241
@dart2241 Күн бұрын
@NoonzAirborneRC thanks for getting back to me so soon. I'll def check out the vid you recommend to look at, thank you😊
@WildBillFlysRC
@WildBillFlysRC Күн бұрын
Great flight and review, Thanks Noonz!
@NoonzAirborneRC
@NoonzAirborneRC Күн бұрын
My pleasure! Thank you Bill 🇺🇲👊
@ricardopr54
@ricardopr54 Күн бұрын
Congratulations on reaching that 100th flight hurdle. That's a sweet jet...Thumbs-up for your video my friend 👍🏾👍🏾👍🏾👍🏾Have a great day. Greetings from Douglas, Arizona 👍🏾👍🏾🌵🌵😊🇵🇷 Like #2
@NoonzAirborneRC
@NoonzAirborneRC Күн бұрын
Thank you my friend. Gonna have to make it a point to come down there 👊🇺🇲
@ricardopr54
@ricardopr54 Күн бұрын
@NoonzAirborneRC Indeed 😁😊 We miss flying with you all...😁👍🏾
@sampamnl.8964
@sampamnl.8964 Күн бұрын
ขอบคุณมากครับ
@NoonzAirborneRC
@NoonzAirborneRC Күн бұрын
You're very welcome! ✌️
@jcb6713
@jcb6713 3 күн бұрын
nice smooth flight ! ...
@NoonzAirborneRC
@NoonzAirborneRC Күн бұрын
Thanks buddy ✌
@williamhammond3998
@williamhammond3998 7 күн бұрын
I have an X20S and absolutely love it. Switched from my DX9 and haven’t looked back. I’m considering getting the X14. It looks like it would be a very comfortable radio in the hand. Also it would force me to become familiar with Ethos without using a touchscreen.
@Artistlife4ever
@Artistlife4ever 8 күн бұрын
Can you please make a video of the control setup?
@FSAcalabriacrew
@FSAcalabriacrew 9 күн бұрын
Hello Sir, could you please tell me how you were able to add a custom picture to be shown just after second before the radio turns off the one which looks like a sun, please. Thanks
@Dhouston1125
@Dhouston1125 10 күн бұрын
what is weight without landing gear and without batt?
@kostaskaronis5046
@kostaskaronis5046 10 күн бұрын
nice one...but in my opinion,a 170 is an overkill for that airframe cause its super light...if i was to build it again....i would consider a 100 or a 120 with fuel bag and simplified setup,meaning no pioneer,4 baterries etc etc.
@NoonzAirborneRC
@NoonzAirborneRC 10 күн бұрын
@kostaskaronis5046 this project was exactly that. Overkill lol. Pilot always goes big on turbine side. It's his thing. Thanks for watching 👍
@kostaskaronis5046
@kostaskaronis5046 9 күн бұрын
@@NoonzAirborneRC be causious on throtle....i broke my right wing cause of high speed at the 6th flight.....
@WildBillFlysRC
@WildBillFlysRC 13 күн бұрын
I can't wait to see people mod the paint scheme. such a great flier! Thanks, Noonz!
@NoonzAirborneRC
@NoonzAirborneRC 12 күн бұрын
Me too. I've seen 2 so far! One was a UPS livery and the other was a frontier airline. 👊🇺🇲
@SquawkVFRC
@SquawkVFRC 14 күн бұрын
Nice work Komrade
@NoonzAirborneRC
@NoonzAirborneRC 12 күн бұрын
I'm glad you like it!! Your fishtank is reallllly cool BTW my friend! Dasvidaniya Kommmrraaaaad 🇺🇲👊✌️
@SquawkVFRC
@SquawkVFRC 11 күн бұрын
@@NoonzAirborneRC thanks mate! I should get back into RC. Kinda miss mucking around in the air
@A.M.-RC
@A.M.-RC 14 күн бұрын
So cool to have an airliner in a smaller size. Nice maiden!
@NoonzAirborneRC
@NoonzAirborneRC 12 күн бұрын
Thanks!!! She flew great made me look good lol yeah it is nice, I've enjoyed seeing everyone's custom liverys from UPS to Frontier Airlines 👊🇺🇲
@kairos9508
@kairos9508 14 күн бұрын
can you recommend a controller, transmitted and receiver to use?
@NoonzAirborneRC
@NoonzAirborneRC 14 күн бұрын
@kairos9508 frsky x20s and a frsky archer sr8 plus is what I use. Rx is about 45.00 and transmitter about 450...BUT you can get a frsky x24 for under 190.00 all available on BH
@grahamtinkler4562
@grahamtinkler4562 14 күн бұрын
Whats wrong with a small rivet gun?
@NoonzAirborneRC
@NoonzAirborneRC 10 күн бұрын
For?
@chrdra2368
@chrdra2368 15 күн бұрын
Interested in those wire keeps! Where can I grab some?
@NoonzAirborneRC
@NoonzAirborneRC 10 күн бұрын
www.amazon.com/RoleDec-Adhesive-Squares-Fasteners-Management/dp/B0D127YT72/ref=asc_df_B0D127YT72/?tag=hyprod-20&linkCode=df0&hvadid=693071814205&hvpos=&hvnetw=g&hvrand=9010623399192450801&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1013487&hvtargid=pla-2344906638124&psc=1&mcid=c91c11c1b0143087a4a03230c8998f6f&gad_source=1
@NoonzAirborneRC
@NoonzAirborneRC 10 күн бұрын
I put a small dab of foam tac or CA depending on what I'm putting it on to help hold it. It sticks great but out in the dun can become weak.
@vincentrichard2703
@vincentrichard2703 16 күн бұрын
Unfortunately it's not the for same I have for my Horus X10S, but happy to discover it exists for TANDEM transmitters 👍
@NoonzAirborneRC
@NoonzAirborneRC 10 күн бұрын
Thanks for watching!
@radmoore4998
@radmoore4998 19 күн бұрын
Where can you get the stand?
@NoonzAirborneRC
@NoonzAirborneRC 19 күн бұрын
@radmoore4998 email [email protected] and let them know you are interested in the tx14 stand. They will get it for you no issues! 👍🇺🇲
@mrk8212
@mrk8212 20 күн бұрын
I don't know anyone that flies some version of a T28 that doesn't love it. Easy to take of, smooth flyer, wide flight envelope, and easy landing. Originally designed and built by North American Aviation, the folks that also brought you the B-25 and the P-51. Nice trifecta!
@NoonzAirborneRC
@NoonzAirborneRC 10 күн бұрын
Couldn't agree more! 👍🇺🇲👊
@chrisbraswell8864
@chrisbraswell8864 8 күн бұрын
Did they use left over P-51 parts when North American made this airplane? The wings, rudder and elevator look very like a P-51's.
@mrk8212
@mrk8212 8 күн бұрын
@@chrisbraswell8864 I never noticed before but you are right.
@WildBillFlysRC
@WildBillFlysRC 22 күн бұрын
Steady as a Rock! Cheers John! nice flying sir.
@NoonzAirborneRC
@NoonzAirborneRC 22 күн бұрын
Thanks Bill! Definitely a bird that will be in the hangar for a long time! 🇺🇲👊
@jcb6713
@jcb6713 22 күн бұрын
nice maiden ! good looking T28 👍👍
@NoonzAirborneRC
@NoonzAirborneRC 22 күн бұрын
Thanks as always JCB 👊🇺🇲👍
@ljhobbylife
@ljhobbylife 22 күн бұрын
Excellent maiden flight! Very nice flying model 🙌🏼
@NoonzAirborneRC
@NoonzAirborneRC 22 күн бұрын
Thanks LJ! 👍🇺🇲👊
@Mikeylikesit1968
@Mikeylikesit1968 23 күн бұрын
The spinner is called a prop 😅
@NoonzAirborneRC
@NoonzAirborneRC 22 күн бұрын
😅
@robrobinette
@robrobinette 23 күн бұрын
I want a turbine on a test stand, found the King engines and then found this video. Very cool but consider hearing protection during the test runs.
@NoonzAirborneRC
@NoonzAirborneRC 22 күн бұрын
Tha KS for looking out but my hearing is already gone after 5 tours lol Thank you for watching! 🇺🇲👍
@CvoHobo
@CvoHobo 23 күн бұрын
That paint scheme is awesome, I wish they would make it in a 2.0m size 👍🏻👍🏻
@WildBillFlysRC
@WildBillFlysRC 23 күн бұрын
Great Build video, Noonz! hope to see a maiden video soon!
@NoonzAirborneRC
@NoonzAirborneRC 23 күн бұрын
Already done! Ideo be up soon! 👍👊🇺🇲
@Lukasfly99
@Lukasfly99 23 күн бұрын
In our club, we have four of these models, one of which crashed on its maiden flight. The installed ESC has a BEC that is far too weak and cuts out when the landing gear is deployed. Additionally, the motor contacts are not properly soldered and sometimes come loose. In my model, all three contacts were equipped with a cold solder joint. The plane had a higher-quality ESC installed a few years ago (clear shrink wrap).
@NoonzAirborneRC
@NoonzAirborneRC 10 күн бұрын
I've got 62 flights on this one stock assembled out the box no changes. So far so good!
@Mikeylikesit1968
@Mikeylikesit1968 23 күн бұрын
Not AF Model, Blitz rc isn't it
@NoonzAirborneRC
@NoonzAirborneRC 23 күн бұрын
AF model blitz is thier "underbrand" if ya call it. Same as the durafly same model 🇺🇲👍
@jcb6713
@jcb6713 23 күн бұрын
nice looking livery...good review..👍
@NoonzAirborneRC
@NoonzAirborneRC 23 күн бұрын
Thanks a lot JCB! Maidened today such a pussycat 👍🇺🇲👊
@thorvelasco1467
@thorvelasco1467 23 күн бұрын
Thank you for the upload. I have the Red White version of the same plane, Jolly Roger was not in stock when I purchased. I had to add a lot of nose weight to get the plane to CG right with a 4s2200. 120 grams in case anyone wants to know. It is a lot of weight, so landings are going to be tough for the novices. I fly the book High Low rates, I fly on High. It flies well, it rolls well, it flies inverted with little down elevator. It may seem to some that it's not a good plane given the weight to be added, but I have over 70 packs run through it and to me she flies like a champ. I am not disparaging the plane or the brand, for the price point and features, I would still buy another one.
@NoonzAirborneRC
@NoonzAirborneRC 23 күн бұрын
@thorvelasco1467 my battery 4s 2200 weighs 243 grams. All the way forward with 7 grams of nose weight cgd just fine. Did u measure front the leading edge of the root? Leading edge is where it's at. Mine flies gimbal. Perfect for beginners. I'd check that ch again. That seems like an absurd amount of weight. Maidened mine today flew just fine and can crawl it in for landings 👍🇺🇲👊
@NoonzAirborneRC
@NoonzAirborneRC 23 күн бұрын
@thorvelasco1467 agreed for the price it's an amazing plane and if for some reason. It went down I wouldn't hesitate to get another one aswell. Thanks for your input 👊🇺🇲👍
@WildBillFlysRC
@WildBillFlysRC 29 күн бұрын
Hi Noonz! Great flying sir!
@NoonzAirborneRC
@NoonzAirborneRC 28 күн бұрын
Thank you bill!! 👊 🇺🇲
@jcb6713
@jcb6713 29 күн бұрын
looks like it's doing well ! nice flight...
@NoonzAirborneRC
@NoonzAirborneRC 28 күн бұрын
No complaints so far JCB 🇺🇲👊
@Mrtcoltpilot56
@Mrtcoltpilot56 29 күн бұрын
Why not use Flight Modes to keep from trimming every time? Makes everything so much easier. Not sure if you did just asking.
@NoonzAirborneRC
@NoonzAirborneRC 29 күн бұрын
I use flight modes on my flap switch. Thus was a reflight so had to trim it in each flightmode (flaps up, landing and take off) I'll necr have to trim her again.
@NoonzAirborneRC
@NoonzAirborneRC 29 күн бұрын
Had a video 3xplainging FM like 3 years ago. Bc ppl kept asking me about it getting confused on spektrum receivers. Not the same FM lol after that video I've seen many switch. Even had a few ppl copy my video which ic fine. Info get out there to ppl who need it. That's the main thing
@Mikeylikesit1968
@Mikeylikesit1968 29 күн бұрын
You made the right choice with your setup
@Mikeylikesit1968
@Mikeylikesit1968 29 күн бұрын
I just updated my Radiomaster to the new AS3X + so have all the same features without the overpriced other brand transmitter
@NoonzAirborneRC
@NoonzAirborneRC 29 күн бұрын
NOICE!
@JeffinLowerAlabama
@JeffinLowerAlabama 29 күн бұрын
John great video and flying. Like Frsky. Jeff in LA USA
@NoonzAirborneRC
@NoonzAirborneRC 29 күн бұрын
Thanks jeff!! Stay cool out there zoom zoom 😎 👊🇺🇲
@Aero_Rc.
@Aero_Rc. 29 күн бұрын
Sweet vid! . Im diggin all the Frsky stuff just got the new x20 aerowing for my turbines its a piece of art
@NoonzAirborneRC
@NoonzAirborneRC 29 күн бұрын
That's awesome!! Yeah they are pretty and WORK!!! 🇺🇲👊✌️
@frankdearr2772
@frankdearr2772 Ай бұрын
Great topic, thanks 👍
@NoonzAirborneRC
@NoonzAirborneRC 29 күн бұрын
Glad you liked it! 🇺🇲👊
@thomascleymans4845
@thomascleymans4845 Ай бұрын
very good explanation
@NoonzAirborneRC
@NoonzAirborneRC Ай бұрын
@@thomascleymans4845 Thank you! Thank you for watching! ✌️👊👍🇺🇲
@Mikeylikesit1968
@Mikeylikesit1968 Ай бұрын
Sorry, didn't mean to trash on your video about that other company
@NoonzAirborneRC
@NoonzAirborneRC Ай бұрын
@Mikeylikesit1968 not worried Mikey. He had it coming. Drew first blood comparing the 2 on and off camera 🤣
@Mikeylikesit1968
@Mikeylikesit1968 Ай бұрын
​@NoonzAirborneRC we know what's good out there . Have a great weekend
@NoonzAirborneRC
@NoonzAirborneRC Ай бұрын
@Mikeylikesit1968 yes. Strange how his comment and he just disappeared.....
@jcb6713
@jcb6713 Ай бұрын
good info, tnx 👍
@NoonzAirborneRC
@NoonzAirborneRC Ай бұрын
@@jcb6713 thanks JCB! Hope all is well!
@SquawkVFRC
@SquawkVFRC Ай бұрын
Get some!!! lol
@NoonzAirborneRC
@NoonzAirborneRC Ай бұрын
Whoot whoot! Hope all is well with ya Komrad
@SquawkVFRC
@SquawkVFRC Ай бұрын
@@NoonzAirborneRC I’m doing well Komrad! I hope things are good with you sir
@stevecharrison
@stevecharrison Ай бұрын
Great video John!
@NoonzAirborneRC
@NoonzAirborneRC Ай бұрын
Glad you enjoyed it steve! An oldie but goodie! I have enjoyed seeing people take my video and redo it on thier ch. Hahaha not like it's a patented idea but spreads the word since viewership is diff from ch to ch.
@stevecharrison
@stevecharrison Ай бұрын
@@NoonzAirborneRC I actually just re maidened 2 jets yesterday. After all these years lol. You’re right. Quite a difference in the whole flight experience. Can now concentrate more on maneuvers and less on handling the jet Thanks John!
@Mikeylikesit1968
@Mikeylikesit1968 Ай бұрын
They make a forward programming lua for spektrum users but not sure it works for Frsky. Works for Radiomaster
@Mikeylikesit1968
@Mikeylikesit1968 Ай бұрын
I have a Radiomaster tx16s with elrs and a Radiomaster 4in1 multi module. No more overpriced Spekjunk transmitters
@NoonzAirborneRC
@NoonzAirborneRC Ай бұрын
I have a RM TX16 max. Aswell with my CRSF on it. I ordered a CRSF lite for frsky. I know the FP works on RM I will test frsky and report back