Harbor Freight wheel kit for trash pump www.harborfreight.com/10-in-wheel-kit-for-predator-2-in-semi-trash-water-pump-57322.html
@johnr55456 күн бұрын
God bless
@dallasbagley13 күн бұрын
Such a pain in the ass
@show305time417 күн бұрын
A friend of mine gave me this exact one a couple months ago, which he got from his grandfather. I’m going to try to get it running this weekend.
@BubbasWorkshop2 күн бұрын
Good Luck!
@chronobot200117 күн бұрын
I used tie wraps to keep my ball in the hole. Worked fine. I agree... Stupid design but cheap to manufacture.
@gregmccarter217625 күн бұрын
25 seconds..good bye pump...
@chipjumper27 күн бұрын
I dont know if you still have the bus but do you mind telling me what the belt part number is? My belt is still very loose; bouncing around at the crank pulley even after installing a new tensioner (old one was definitely bad and shaky itself).
@BubbasWorkshop26 күн бұрын
sorry I don't but if you get the engine serial # cummins can look up the part# for you (that's what I did). The engine serial number is located in two places on your 8.3L. 1) On a data plate located on the top side of the gear housing. (Streetside - front) It is the top number on the right side of the plate. 2) On the engine block on top of the lubricating oil cooler housing.
@scso150227 күн бұрын
Thanks for the video! My Northstar 21 Gallon sprayer unit didn't come with assembly instructions so your video saved me a lot of head-scratching. Much appreciated. Take care!
@BubbasWorkshop26 күн бұрын
You're welcome!
@cavinl19 күн бұрын
@@BubbasWorkshop I guess they don't put assembly instructions in the 21 gallon sprayer. Mine didn't have instructions either.
@petekane2501Ай бұрын
Did you need to drill a second hole for breakaway cable near original hole I didn’t see that step. Great instructional video
@BubbasWorkshopАй бұрын
You can if you want...I didn't because since the cable is only used in an emergency I just ran it through the hold for the winch.
@andrewneeld3050Ай бұрын
I tried this about 20 times on my 2011 Wrangler JK and nothing happened. Any idea why? I tried it slow, fast, all the way off, only to acc, literally everything?
@BubbasWorkshopАй бұрын
Sorry no clue..maybe 2011 is different?..if you get NonE message that means it didn't find anything.
@jojovcpb3736Ай бұрын
I have one. Also sitting for 15 years with fuel in it, but in new condition otherwise. Gonna try to get it running following your lead. I’ll report back. Disclaimer: I’m not all that mechanically inclined.😂
@BubbasWorkshopАй бұрын
Good luck! It's actually a really cool, smooth running generator. FYI if you get it running I did another vid using a wheel kit from a water pump to put on it.
@ImJustKindaHereАй бұрын
The oil filters on Amazon & eBay are all fake. My best friend is a master tech at Hyundai since 2002 and he explained to me the several details that give them away. - The easiest way to spot a fake is that sticker... Real filters have never come with that holographic sticker. Those stickers can be purchased off Alibaba for cheap and just slapped on. - The second easy giveaway is the silicone drain back valve... The fake filter's drain back valves tend to not shut on their own if you press down on them using a flat head that fits between the holes. Simply press down gently on the valve through the holes and notice that they don't shut completely. This causes oil to return to the pan and causes a longer dry start on your next cold start (like after changing the oil it takes a second longer for the oil light to go out). - Last easy giveaway is that real filters have a nice pattern etched on the spiral perforated metal center, while the fakes lack the pattern entirely. What I mean by this is on the sections where it is not perforated and closed it has a nice indented pattern all on it. The fakes didn't take the time to care about doing this as it's too much detail. These are just 3 of several more differences, but the clear giveaway is the sticker. If it has a sticker, automatically a fake filter. Otherwise, use it at your own risk. Hope this helps.
@BubbasWorkshopАй бұрын
The filter that came on the car from the factory had the sticker on it...it's one of the three in the video so what you are saying may be true for some filters but not these. FYI the car had 2 miles on it when we bought it so it was the filter that came from the factory.
@martink4719Ай бұрын
could i access that oilplug without removing the axle and pump old oil out?
@BubbasWorkshopАй бұрын
I don't think so..if you have the same transmission i do then hoisting it up is the best way (look for another video I did where i hang it by the front...that's the way to do it!
@jeffwilson4972Ай бұрын
Thanks for this video Bubba! Helpful tip.
@BubbasWorkshopАй бұрын
glad it helped!
@here2pissuoff-ho1bjАй бұрын
The steering is a POS
@BubbasWorkshopАй бұрын
no kidding...built to fail
@sbdr.1241Ай бұрын
I did exactly that & it worked ice cold beverage & a 👍👊🏼🤘🏼awesome idea
@BubbasWorkshopАй бұрын
Glad it worked!
@DizConnectedАй бұрын
Thanks for making the video, I was just looking at these on Amazon and wondering if they were any good. They are under $20 so I think I get them, I hate the front of my pants and shoes are covered with clippings and hard to clean, I think these will solve that problem for me.
@BubbasWorkshopАй бұрын
Honestly these things are awesome...I still use them everytime and there has been no wear after a year of use (and I live in Tx so I weed eat probably 7 mos out of the year)
@InfiniteCraftsmanАй бұрын
Amazing job! I just got a g4200 HST from my neighbor for $200. ALL the electrical needs repair. I was able to give the fuel pump power and flow the plugs to get it running. I’m having a hard time thinking through the electrical, I need to study the diagrams and wrap my head around it.
@BubbasWorkshopАй бұрын
Awesome! I wish mine was an HST if it was I'd fab or retrofit a deck for it.
@Steve-um5mmАй бұрын
This might be a dumb question but you figured your mix with a dry weight in oz.s, if you use a liquid herbicide would you use still use a weight in oz.s, or fluid oz.s? Thanks, great video btw!
@BubbasWorkshopАй бұрын
Basically you use whichever measurement the herbicide uses so if it says x amount of liquid ounces per acre then use liquid ounces if it says dry ounces use dry ounces 👍
@Steve-um5mmАй бұрын
Thanks!
@dwightschrute4560Ай бұрын
Do you happen to have pics of the brake system, specifically the pads?
@BubbasWorkshopАй бұрын
Is yours a hydro or gear drive? if you look @ 3:20 in this video I believe it shows the brake disc...I'll look at it tomorrow or next day to verify... kzfaq.info/get/bejne/o89mnZZ2x7u7hXU.htmlsi=J9oRJj8JbiMe2tnr&t=200
@BubbasWorkshopАй бұрын
also here i believe you can see the disk behind the fuel pump kzfaq.info/get/bejne/ebB_p6Vy0ta5lqs.htmlsi=ntExHv783ykTtjAz&t=484
@ghow8524Ай бұрын
Have you actually ever done this on a ship? I'm going on msc next week and the WiFi prices are ridiculous for a family of 3. Thanks
@BubbasWorkshopАй бұрын
Yes this is based on personal experience👍 about two years ago.
@bobburke33842 ай бұрын
How about a socket extension
@conradluper50422 ай бұрын
Yup. Mine came in yesterday. All you said plus protection from dang poison ivy!!
@BubbasWorkshop2 ай бұрын
I love them.... Just used them yesterday!
@AM-kr5bf2 ай бұрын
Ì0
@lisapetree26452 ай бұрын
Hubby talked to someone that said a lot of times when there’s a lightning strike it will take out the coils on the valves, so he’s going to have to ring all those out to with a meter, there’s about 8 or 10 of them and there all under ground. Is this true?
@BubbasWorkshop2 ай бұрын
Luckily I didn't have any damage besides the controller itself...the coils are pretty tough (just an electromagnet - no electronics). If you had a strike and the controller is dead i'd start there first then see what works and what doesn't and go from there. The coils (sprinkler valves) are underground but should be housed in little containers covered with a green lid (or similar) so they aren't hard to work on. If a valve (the coil is what moves the valve) doesn't work they are easy to replace.
@lisapetree26452 ай бұрын
Was there anything that you had to do to the stations or just replace the controller?
@user-sp7kt7vw7w2 ай бұрын
I have a S170, just wondering if same bearing conversion kit will work for my mower.
@BubbasWorkshop2 ай бұрын
I'm almost sure they do...i believe it's a 5/8 axle. I would look on john deere parts site and see if the front wheel assembly has the same part#. I did look at a couple listings and the s170 WAS listed it just doesn't show up in the description (but if you look at details of the listing on amazon it lists 50+models it fits).
@abelauclair89762 ай бұрын
great video. thank you!
@BubbasWorkshop2 ай бұрын
thanks!
@charleschapman24282 ай бұрын
Caution should be taken when cranking the motor with the plug out, sometimes the cylinder can be full of gas due to a bad fuel shut off and when the motor spits out the gas the spark plug or the plug wire can spark causing a fire 🔥🔥🔥
@BubbasWorkshop2 ай бұрын
Good point!
@thezofamilychannel72042 ай бұрын
After the 5 qt. I splash it up to the top with dura lube.
@CallahanHomestead-n-Bees2 ай бұрын
That rust will buff right out 😂
@lesliebrennan33512 ай бұрын
Good job 👍 but doesn't work with X300.
@Johnzvirgzdins2 ай бұрын
do you have a part number in the pump?
@BubbasWorkshop2 ай бұрын
68371-51210 is the Kubota part # but if you put that part number on Amazon you can find one for about 20 bucks or you can pay 200 bucks at Kubota.
@Johnzvirgzdins2 ай бұрын
Thanks for info I used amazon.
@Electobat2 ай бұрын
Helpful video
@tcmits36993 ай бұрын
What a beautiful tractor and restoration, but what is it really good for. Watercooled diesel lawnmower, (complication and expensive)too small for any real work. Not very practical IMHO, nice job ,though🤔
@BubbasWorkshop3 ай бұрын
I actually use it quite often because it is small and powerful...I just used it this weekend hauling dirt (it will pull a full size trailer..not very fast but it just chugs along). If it was a hydro it would be a great mower but being a gear drive it kinda sucks for me because I have a lot of trees/etc... (so I do a bunch of forward/back).
@MattHyatt3 ай бұрын
Nice job! I admire you for seeing it through. 2 years is a long time!
@BubbasWorkshop3 ай бұрын
Thank you!
@BubbasWorkshop3 ай бұрын
Not sure if you saw the first video but it actually started off just trying to replace the water pump then it snowballed into the two year journey!
@MattHyatt2 ай бұрын
@@BubbasWorkshop Funny how that happens. I've got plenty of "snowball" projects myself. Looking forward to more videos from you!
@BillyTucker-hi4sd3 ай бұрын
Buy john deere spindles and drag link and do away with that set up
@jameshogin59483 ай бұрын
THANK YOU!! I have not seen others who have shown how calculate this for a pull behind tank sprayer.
@BubbasWorkshop3 ай бұрын
I'm glad it helped...when I finally figured out how to do it I had to make a video because I couldn't find any real direction out there. It seems if you're a "pro" this is stuff you already know but the rest of us are left guessing...
@user-hh2xv5zk5i3 ай бұрын
Any suggestions on the rear panel to floor actuator 98 Ford expedition 2 row only built into the rear of the center console So it’s not the one with a full rear hvac system I’m having issues with both units right now
@christianramirez71033 ай бұрын
Si dice eco se puede cambiar eso ???
@pedrobastos32183 ай бұрын
Nice job helps me
@rogerfoster39973 ай бұрын
that is a lot of determination, the issue is the crappy alloys used in these China tanks & Carbs, I had one that did the same, I replaced the carb & strapped a plastic gas tank on the side from an old lawn tractor, I have an older Coleman Generator with a genuine Honda Engine, the thing is at least 20 years old, sits with gas in it all the time, it starts & runs great & not a spot of rust in the tank or filler screen or cap while the cheap China Knock off generator I bought looked just like your tank after sitting with fuel in it for 3 years.
@quillmontana77263 ай бұрын
Haven’t tried it yet but I think this is my old 95 Scotts problem have same exact symptoms thanks a lot
@alanobrien56163 ай бұрын
Thanks for your help in this video going to try this today 🤞
@BubbasWorkshop3 ай бұрын
Hope it works for you!
@mechanics4all4054 ай бұрын
still seemed to struggle
@user-yr5ee9vm9e4 ай бұрын
I just bought a pair should do tha trick Great Vid 👍👍👍👍👍👍
@BubbasWorkshop4 ай бұрын
I just used them yesterday..they are awesome!
@thebmster4 ай бұрын
Many thanks!! 3.19.24
@fiftyoon4 ай бұрын
Does anyone happen to know the part number of the small black shims or protectors that are on the hood where it closes against the instrument panel? I'm missing one on my x310. Thanks!