Thank you very much! This worked. I used adhesive laminate and it worked OK but is a little fiddly if you get a bubble! Just remember which way the plastic 'contact' its inserted - it fell out and took some trial and error to get it the right way.

Well done video 😊

Man, I installed this system in a tall closet. Used 16 inch deep shelves. Moved out and got divorced. That $160,000 house now lists for $455,000. I really miss that closet I built! lol Cost around $1,800 in materials.

Question. I have a F150LA yamaha engine. my speedometer was acting up. I did clean out the inlet hole and blew back through the hole, it seems like it should work. How did the speedometer work before if I have not installed the speed sensor? Where does the black nipple go to? It was all zip tied>

hello I carried out exactly the same assembly in the video but nothing is displayed on the speed fuel (yamaha F70 engine). Do you have an idea of ​​the problem?

The problem with spray foam, is that the material is basically a cured polymer that is actually a solid material. That solid material is not meant to dampen sound. The best way to dampen sound, would be to have a rubberized coating on the bottom side of the panel, to subdue some of the reverberation of the metal. Add small air gap to a install a radiant barrier, then a layer of foam or even better some fiberglass insulation of sorts would make a big difference over just a solid layer of poly spray foam.

Daniel,...just found you recently, wish I'd discovered your channel sooner, much appreciate your sharing experiences in this community. I'm working on my 20' v nose cargo at the moment. Mini Split is my direction and plan on installing this inside the trailer, well vented, dedicated box in the interior of the nose of the trailer, I'm curious of some of your thoughts and objections to this if any. I'm trying to head off or address challenges as to keep the trailer as stealth as possible, all things discreet and hidden. Thank you so much for any input, stay well!

I did that and it was just fine till recently is now making funny noise I don't know what to do

Awesome vid, 100% real… just got done my yamaha speed tach

Excellent tutorial Danny.

Thanks!! Great video. The glue on my 20 year old guages was way harder to remove than yours, but I got it done. I did both at the same time and inadvertently switched the LCD's. I didn't know they were specific. Once I switched them back, the tach worked, but the speedo gave an E1 error on startup. I had to replace the LCD and now all good. Still need to work on the crazing but I'm happy. Now that I can see the guages I can see the trim sender needs to be replaced.

How did you do you vent line and material did you use. Looking for the outside louvre and connection when you vented it out the wall

This worked like a charm on 22 year old gauges. Just saved almost $600!

Camera sucks

Microphone

What a hack lol dang

Looks like its vinyl.

Best info so far, thank you sir, is there any trouble with electrical serge

Do your controls to the steering wheel that controls volume crusie control ,stop working

FYI - struts should be set to collapse down ward like your 10” struts (the opposite of your 6” struts). This stops the oil from drying out in the struts. :)

Does the strut itself pull the door soft close or is it the hinges?

Thanks

Thanks for the vid. Installed on my F150; took 20 mins and super easy!

Thanks man you help me alot,my gauge now looks like new

I just got 4” action series, do you use the existing transom holes to mount the plate? Did you by chance reach out to Bob’s about a longer relay harness?

Is the steerimg controls working?

Instead of using the smaller tank in the front, would you be able to plumb the toilet to use the larger gray tank? Reason i ask is Im building out an almost identical trailer (legend 7x19 FTV). Great work btw.

Do you still have this camper?

Olá, sabe me dizer onde o fio branco é ligado? O meu está desligado e não sei qual é a função dele no painel.

Hey man love ur videos!! Just wanted to know if it is better to install a sub in a factory stereo or android headunit. Btw I have a mitsubishi pajero with a factory Rockford soundsystem.

I really found this clear, concise and helpful! I need your help with reinstalling my Yam speedo/fuel gauge which is same as yours. Behind the console, I found the corresponding Yellow, Blue and Red wires and connected them. That leaves me with 2 Black and 1 White wires which I cannot identify a match. Are all 3 required? Can you tell me what their function is? You mention that Black is Ground, what about the 2nd Black wire? Any help would be greatly appreciated. Thanks for the great videos.

What is the yellow screen behind the display screen. Is that the backlight?

Nice work!

Everything works on my Android radio that I just bought except it will not hold the radio station memories and it was full plug-and-play I didn't have to mess with any except for one wire which is the backup camera wire do you have any suggestions what could be happening

Thanks Dan, my back camera flipped upside down whenever I put the car on reverse: kindly help me out with solutions, thanks 🙏

Did you have a problem with gasses coming into the inside without a p trap?

Yep it work!! I got may done, it does take time and patience but got them done and they are like new.

Although I have a 12v version I'm using to power RV tank heaters I am using to keep the LiFePO4 batteries warm in the RV, this video was PERFECT for helping me get it wired correctly. Thank you!

thanks for sharing brotha

Can anyone help me connect phone via USB ( it’s greyed out)

Hahaha wtf are you doing 😂😂😂

Hi Daniel My son has just carried out an upgrade on my 2012Mondeo titanium x sport all seemed okay until we tried to adjust the climate control there was no reaction on the touch screen do we need a interface the unit is a Artsxw 9.7 Inch Car Stereo Bluetooth Touch Screen Car Radio For Ford Mondeo MK4 2011-2013 Android 10 Head Unit GPS Sat Nav Support CarPlay Android Auto Wifi 4G Mirror Link TPMS Built-in

So no level sensors?

How much again did u spend all together

I'm trying to connect my car sterio wires to the android tablet but unexpectedly I found the cable to which I'm supposed to connect the wires is cut off! Please can you advise me what i should do. Thank you

Mine has a ticking sound and slight static noise that doesn’t go away how do I get rid of that?? Also key one and key two wire splice to what other wires for the steering wheel controls to work ??? I have the basic GM radio that You’d find in late 2000’s GM vehicle

I am concerned that hundreds of pounds of water will bend those aluminum L brackets.

How much is it?

What do you call the 3/4 " fittings he is using, my hardware store couldnt find me anything like this...

I saw a document on the confortotal to change the C to F: Press and hold the UP and DOWN buttons for 5 seconds at the same time, and the temperature display will switch between Fahrenheit and Celsius