Danco 12005 Shower Arm Stabilizer Bracket and Flange Cover, No Size, Chrome

Does the mounting bracket screws go threw the crossbar and threw the ceiling? The ceiling is just plaster so we’re wondering if it would be strong enough to support the fan. Maybe we are missing something?

I’ll need to see about attaching the weed eater. With a long two acres, catch the front when there.

Shut the kid up.

I got one and the air relief valve releases a lot of pressure when it reaches 140 lbs have tried everything and can’t get it to get stable

Thanks for the video, getting ready to build this same setup for a construction trailer. Already have the roof vent, and waiting for the local RV dealer to get the wall vent in stock. You giving an inside look at the box was the one missing piece to the puzzle, and I'm sure I can come up with something a bit better for the inside of mine. Wanted a rooftop RV, however they are crazy expensive, plus Construction/cargo trailers the roofs are made a bit cheaper, where you can't walk on them, like an RV.. So this seemed the best way to go. I may or maynot be making a video on KZfaq on how to build this from scratch with part numbers.

That's wild. From my view, that slope doesn't look steep at all. I have a Bobcat ZT with stock turf tires. I can only shake my head each time they spin.

cant this be repaired ??

Came to your channel for advise on using my Walker on steep grades, but hey, nice early Corvair!

This was very helpful. Thanks.

Thank You, excellent 🏆🏆🏆!

How did you get it out, we undid the screws in the front and it wobbles up and down but it feels like there’s something in the back still screwed down because it will not pull out no matter what we do and there’s no way of getting access to the back without removing the outside and it’s been on there so long that it’s bridle or just break

My washer is not draining through the small hose in the front where the filter is the water just gushes out through the filter once I opened it and the filter is not clogged at all, I think it’s the hose that runs from the back and drains out there I looked down in it and it has all kinds of dog hair and stuff in it, we raise Belgium, Malamas so you can only imagine the hair and stuff. Could I be correct about this and if so how do I get the hose completely out of the back of the washer???

I know this video is older, but still: How has this held up? I was planning to use Chore Boy or copper wool, since steel wool rusts. We live out east, and yes, the brown rats got really invasive during lockdown, but we just had regular field mice in our car (upstate).

Very cool, so how much did they improve the ride quality and what was the costs of them ?

Isn't that third 10 mm bolt a adjuster screw for angle of headlight

Hey Daddyswork, what manufacturer did you go with on rockauto? You found the exact same looking assembly as stock and I would like to buy the same one.

what you showed was absolutely nothing . except , you used 13/16 lug nuts . great info .

Do you need to put sealant and reseal around the AC when installing the new AC?

Great idea! Thanks!! I need to apply that idea to a Deere S100! Great job!

Great video, well done, good camers work !!!

I like it. Good job.

Thanks for the content, just picked up a MKX and looking for coolant flush/fill/burp tip. If your tank and coolant was so old you were worried about it why did you not change thermostat? New thermostat seems like a cheap preventative maintenance item. If you are a high miles engine ( like mine) best practice is to change timing belt, water pump, oil seals, etc. rather than remember to monitor your tank reservoir level. fyi you spent to much time talking about minutia and not how to get it done, adds little value, like telling someone how to build a Swiss watch when they ask the time of day. A real time waster on use of old OEM hose spring clamps, throw em out. I always go with SS clamps (hobo freight clamps not SS) which most big box stores sell in different sizes in a "contractor baggie", for use on my fleet of motorcycles, vehicles, and boats. My two cents.

I was looking in the manual and there is a page that says we'll lug nuts 70 foot pounds

The washer broke within 2 months of getting it. It washes blankets, towels, rags, and dog toys for a puppy store kennel area. Helping my friend figure out a way to diy fix the washing machine. It wont drain sos

What is the weight carrying capacity of the bars?

Awesome! Was able to fix my dryer with this handy trick!

Thanks from my Trusty 2003 Expedition with 68,000 miles. I bought her new in 2002. One of 5 that came to Houston. I had a leather interior put in before I took delivery. She pulled a 26FT Travel Trailer and back and forth between Houston and central Texas. Some trips to work before retirement in 2005.

Did you take the opportunity to reconfigure the pan area under the AC unit to improve the water flow, external drainage and water tightness of the area? There seemed to be a number of unaddressed long term issues there.

Roof units have to deal with water just like the wall units do. So proper drainage is key for both installations. It appears as though the drainage configuration may be more problematic for the wall mount units. I was interested to see what was done for the drainage on your unit after you removed it. I was not impressed with the water proofing of the AC unit space. I was surprised at the rather un impressive design and build of the space.

I have a problem with my standing shower. The water flow suddenly came to a trickling halt. The shower would be half flow and then after a few minutes, the flow starts to slow down. Even after changing the shower head, it definitely isn’t the problem. It is def an internal issue. Could it be a blockage in the cartridge? Please help.

Good video. One way to get the pipe to be more secure is to wrap a rubber o-ring around the pipe and then secure with a small amount of waterproof electrical tape around the o-ring. Then the flange can attach and you can screw. Using epoxy isn’t advised because it’s a permanent bond. Easier to remove tape and a rubber o-ring later.

Going on having my dryer 2 years, this was throwing d90 and d95 codes since day 1. I had cleaned my vents prior to hooking up 2 years ago. I called Bob from India at support, WHAT A JOKE. Anyway the dryer is great for clothes and does not throw a code. When it comes to drying towels plan on turning off and on about 5 times before they get dry. Finally had enough and found time to mess with it. Did what’s stated in this video, no help. LG DRYER IS JUNK compared to a cheap dryer, but hey it looks prettier than the basic dryer 😡😡😡😡

Thank you!

Love the input. Buying oem straight from kia

Best way to do it

thank you for this! i needed to put these up but everyone assumes you have the fancy track system they make for closets these days instead of just showing how to do it the old fashioned way!

Hay Ds you can remove the headlight assembly you can also lift up the fuse box cover and then the capitol open enough for you to pull the bulb out disconnect the wire and pull the ball out

Too much fucking talking just keep it short too the point talking about Ford filters you guys act like your on some reality show lol

I'm sure glad you posed this video , ME and my parents want to say THANK YOU, , I watched your video , and i went to tell my parents, i did exactly what you did , and yes they had the same issue, 2 big dogs and a cat and My mom washes their beds, i drained the water and the filter was full of fur, thanks to you their washer is working again, they were getting ready to call the maintence guy also,which my parents could not afford right now , THANK YOU, THANK YOU from all of us, GOD BLESS YOU

I have this exact problem. Replaced the calciumed up cartridge, still has low pressure and won't get very hot. I dont have a shutoff valve on my tub spout to be able to run only from the faucet. No idea where to go from here.

Quantos Hp?

Absolutely fantastic job recording this video while carefully explaining each step in good detail! Please make more videos 🙌🏼

Thank you for posting that. That was exactly what the problem was

You mounted the bolt backwards, now the threads can hit stuff and get damaged.

Very helpful.

Don't be afraid to cut a hole in the wall and fix it right. Drywall repair is easy with hot mud=setting compound, which dries rock solid in minutes. The reason the pipe is loose is constant pressure from moving the shower head. It's only a matter of time before the pipe loosens from the drywall. It's got to be attached to the studs like it was or should have been in the first place

Leave the factory one in and the shocks should be level.

Hello thank you i just followed your instructions and got my washing machine spinning again . That saved me a load of money and turned out to be an easy fix . So once again thank you 😊

I did all this still not working 😢