Another top job gentlemen! 👍

Use long nose pliers for last bit on the front brake caliper.

Your customer should buy an automatic. Job well done guys. Thanks for your honesty in showing all the issues involved. Keep up the good work.

I need to do the timing chain and tensioners on a mk8 fk1 Honda civic hatchback it’s a 1.4 have you any videos that will help me? I’ve never done a timing chain before and all the videos I see is just the USA versions of the car(not the same engine) so I’m not sure if it will be the same or not

Great

LOL, I don't trust any so called "mechanics", I have been failed so many times. I service my own car and having no issues at all. It is so much easier to do it yourself nowadays. It is not 1980 where there is no access to any help.

Axle stands!

Wheel hubs being cleaned before the new discs are put on, that's caring and doing it properly because many don't bother!

its his loss,you are a great guy

What’s your number and address guys thank in case I need a loyal mechanic

Take good examples all cowboy mechanic clowns out there STOP ROBBING People

5:25 This is really clever by putting the wheels under the car as a Secondary safety measure, Because if the car fell off, then these wheels will keep breathing space under the car at least. This is really a Dangerous job. Please carry in your van 4 Wooden blocks, each 2 feet high. Then put those under the car after lifting it.

13:30 Wow!!! Excellent explanation, learnt a lot from you. Although i am not a Mechanic by profession, But by getting Ripped off from different Garages run by Cowboy Mechanic, i try to learn about car & fixed many things myself. I also bought an Autel scanner too & it helped me a lot, specially with DPF Regeneration.

Coil pack should be checked for input before condemning. Many faults can cause no spark.

26:20 How much do you charge for Brake pad and disk replacement? Can you update us if Halfords were able to take that bolt off.

Excellent 👌 Honest man. All the best wishes 👍 Subscribed I will bring my car if it develops any problem. Can I know how to contact you.

That BMW with the stuck lug bolts... I'm a mechanic but my work doesn't have a tire machine, so had to have the rear tires replaced at a shop. Same day I tried removing the wheels because I had a suspicion. Total of 3 bolts were completely stuck and wouldn't come out. So I went back and they had to use the air gun they use on lorries to get them off, and then they overtightened them again while I was watching! Before I drove out I loosened them all, and then tightened to spec (I brought my own torque wrench). Pretty annoying that you can't trust others in the trade to do it right

Well, at least that wheel wasn't going to fall off unexpectedly!

You don't have to Name & Shame. But can you tell us which area in UK those Cowboy Garage are situated. So we can stay away and save £900

12:08 MECHANIC 😅😂🤣😁😁😁

EASY!

Real genuine honest people not much around mostly clowns everywhere

good work boys !

uk has lots of bad mechanic shops probably not certified

You r doing the clutch anyway ,You don't need to call the customer a liar,Its just bad for you, They paid you thats the main thing,

Please PLEASE tell me you required the customer to drive down the road with you sitting in the car! That driver needs to be instructed on proper clutch habits before being allowed to drive on the open road. That should absolutely be something you do simply to warranty your work for anything past taking it up the road yourself when you finish, because that is ridiculous!!

If a wheel nut wont come off just slacken off the others and drive it round the block.

Love the videos man I am asian myself. I am so proud of us when i see us asians just hustling everyday to reach that dream. Keep grinding! Hey wouldnt it be a good idea to out your info on the side of your van to attrach more customers? Free advertisement on the side of you work van!

Not sure if it has been mention but.. why not buying a marquee for those rainy days, 98% being UK. Just open it above the car and let it rain! Great work!!

Fair play to you! I hope your business goes from strength to strength!

Hello when you in Portsmouth lads

your knees are gonna hate u in 5 years

Hi. I bought a car few days ago mercedes with 59000 original milage diesel...q is do I have to change the timing belt.??

No it doesn't matter as long as you use both pads of the same brand but you can use brembo discs and pagid pads no problem always love watching your videos

Why not get an oil suction pump for a few easier oil drains?

The good thing about you guys is you dont edit and hide the mistakes you did. You put all that in the videos which is very good for all us DIYers to learn from your hard work and experience. Appreciate you guys.

its just a part of doing buisness , accept it move on , further down the road you will meet more like him, just realise this is why you get paid the money you do to put up with wasters

Needs a castle nut & pin, simple nut is dangerous.

IN 1977 AT 17 YEARS OLD,I BUILT A 68 CHEVELLE SS396 with the square port racing heads etc.... an old race mechanic helped me put it together. i purchased a (zoom) brand off the shelf clutch. first time i drove it to town i had to be dragged home on the back of a wrecker. seems that when the clutch pedal was to the floor, there was still some friction , and then as i was going down the road in 4th gear and it would get sideways, that clutch just didnt have enough grip. yanked that garbage out and installed the one the previous owner had built by a clutch guy (Duglas Zahn, Arkansas brake and cutch) . previous owner quit building the car because of a divorce, but was an engineer and traded the entire factory engine for a set of square port racing heads with 3 springs to each valve. we also modified the throw on the clutch arm to increase.its movement. this new clutch was much stiffer and made my leg shake to keep it depressed, but it never failed like the ONE NIGHT STAND CLUTCH DID! by the way, im married to steffy, im NOT a girl!!lol youtube buffering lots of the videos i watch now, some wont even play more than 2 minutes and thats it!

Lazy mechanic. Hope he gets a rollicking for this. I had my BMW serviced and out the dealership an orange light came on. Straight back.

where you based out of mate ?

Diagnosis is hard and customers don't like paying for it so Mechanics who can't diagnose always want to replace parts. There is also "some" court protection against it, as you have a new part and its then up to you to prove that the old part has the same amount of life. This should not apply to non-service parts that are supposed to last the life of the vehicle. You should explain the terms clearly, tell them you are recording the conversation, and invoice them if they don't pay, then take them to court for not paying.

Kwik Fit scammed me when I first passed 22 years ago. Never went back

As an asian automotive/airline mechanic of 42 years, I commend you guys, most young people these days are not motivated or mechanically inclined like yourselves. Both of you remind me of my buddy and myself doing side hustles when not working in the garage some 30 years ago. We had the occasional lousy customers, and few jobs that we thought we bit off a little more than we can chew, but we persevered and became even better mechanics. It's so great to have a good, knowledgeable partner/team...good luck to you guys! Liked and subbed.

I just came across your channel, will sub, informative & entertaining

No warranty given I hope guys because it’s going to happen again. The brain and left foot doesn’t know what it’s doing.

Good job boys 🎉

The MOT history on the Van ain't great

Ran into this exact issue on a complete harness melt, caused by a $1 stereo install, on a two-year-old BMW 328i. Harness wasn't available at the OEM, so I had to grab a used one from the previous year. I had to add several additional circuits to the harness. It was a freaking nightmare job.

wait... wouldnt the adblue reset when you refil it ? or is that a french thing