Most people are not going to get the joke hidden underneath this video

your videos of assistance are so much better and more informative than Lectric company.

Thank you!

Some of these instructions are a bit misleading, overall bad, skipped past as if the step is very easy (front fender bolt is insanely difficult to get screwed in without scratching up your fender, rear reflector is about impossible to get the screws in because of there being little to no room for your hands....). Kind of disappointed in the lack of detail with some of this instruction.

This was NOT what was wrong with my wobbly front wheel. It was the actual wheel screw needed to be tightened. Not sure why it would come loose but it did and it took a minute to adjust but its solid again. Phew

Does this have a 1 1/8 to 1 1.5 head tube?

So after assembly is there anything else that needs to be done?

Straight to the point and just the video I was desperately in need of!!! Thank you 🙏

You guy was riding right down the middle of the street . I ride on the sidewalk and bike lane. Cars still manage to hit me. Do you just get a large insurance policy?

What if the central bolt is already tight and head set is still loose?

Anybody know what the magnet amount should be 6? For the acfe cruiser?

I’m 6’2” toll 76-yr old long-term biker enthusiast like the Ride1Up brand ambassador in my local Northern CA area. I just purchased online Portola w/ 10.4Ah battery. And I have a high hopes Portola to be not only the best value lighter foldable step-thru e-bike I got in comparison w/ my previous two I already owned. I tested Portola with Ride1Up local ambassador in advance and it was a love from the first glance. Hopefully Portola will be delivered with added missing before derailleur guard installed already. Once delivered I’ll follow the video instructions and assemble by myself. I watched already the assembly video in advance and here are my experienced e-biker comments for San Diego Ride1Up company to consider. My hopes are that my comments will serve better all of the Portola buyers in the future. 1) The not-adjustable handlebar stem needs to be upgraded ASAP and match all other brands today in the foldable, step-thru market. This will allow especially tall riders like me more posture adjustable options not only the seat height. It’s a big supersize that such a quality-centered company like Ride1Up is not providing with adjustable telescopic handlebar stem like the competition? 2) The major competition in this most popular e-bike step-thru foldable category provide their customers with practically 100% assembled foldable step-thru e-bikes, so Ride1Up should do the same with a very little design effort, right.

its too easy steal the battery. Keep a bookbag if you lock this outside so you can take the battery with you. All Ride1up bikes have this flaw.

Thanks. Very useful. 👍🏻

I have this vibration/squeak coming from my front hub motor. I think it's a needle bearing, because it only happens with weight on the bike and gets worse with use.

Best looking bike 2023 and 2024

No way they didn't notice the cameraman

Please i need your help. I own engwe ep 2 pro. I wrote to official support engwe that I have a huge problem with an error 25. I followed the troubleshooting instructions, I tried everything but without success. I disconnected all the connectors twice, there's still error 25 on screen and back light is on. I tried factory reset but without success.(does not allow anything, only power on and off.

Hey, how did you upgrade the controller, I have the macfox mx20. Exact same bike, I had a look and I have a 10 pin motor connector. Everything available is 9 pin.

Hey I just got the revv1 DRT and this connect rack, the rack is NOT compatible with the DRT version even though it says so on the website

?

I have a different noise kzfaq.info9INqFi1IpqU?si=_nnIaLBDXWphKs03

Sht thank you for this video

Ordered! Anxiously awaiting its arrival in a few days.

Very nice! Ordered mine a few days ago! Cannot wait to get it! This will surely help 👍

Did you guys ever make a video about the rear wheel video for the Roadster/V2? Asking for a very sad girl who popped her back tire tonight. (Its me, I'm the sad girl.)

Put in my Preorder and I am so excited! First E-Bike I have ever purchased!

Straight forward instructions. Unfortunately one of my screws under the seat came with a star pattern (instead of hex) and was tightened by Zeus himself. It took some ingenuity to remove.

why have I watched 12 videos trying to find the best settings for speed and still have no clue? Does anyone actually tell you what the number in the box on the screen means and does ? Mine is on 3 but I swear one time watching a vid here on YT showed me to put that nuber up to 7 or 9 does that have anything to do with speed.?

When screwing in the axle nuts my wheel gets really stiff, what do I do?

Heres normal motor noises. and here are other noises that have absolutely nothing to do with the motor..

Thank you. Up and running in 1 hour. Excellent video. I have to admit I was intimidated when I learned I had to open up the bottom and mess with the electronics, but the video convinced me to try. Thanks again,

Tnx, but need bottom bearings and stuff to be shown plz.

I cant seem to get the stator off after removing the bolts. Does the axle just slide through or do i need to undo more stuff on the break side?

Everywhere I turn, Mikey G is there. Hard working dude!

This guy just fixed my bike! 💪

Is there anyway to infterfere with the manufacturers settings?

Nice he built it but in the end you dont show it in full view. Unbelieveable

It's called a Hygo conecter 👍

I really like this bike

@ride1up do yall have an range extender?

I don’t use the pannier racks on mine; BUT, I needed to install faucet plastic washers to compensate for the length of the screw and bolt that affixes the pannier bracket to the frame; because, the screw and bolt are longer to compensate for the additional width of the pannier brackets. I’m sure you can use regular washers, but I prefer the plastic faucet washers to prevent scratching the frame. I just got this bracket on Friday, 17-May-2024; hence, I will post my video once I find the bag to go on top of the rack. /s/ Alfonso Faustino

What could cause a sort of rattling noise coming from the speed controller during load? Mine just started doing this and was always silent before!

That’s dope, I would get it but I just got a turris

I'm actually having some kind of noise from my ebike and I think it's the motor but I'm not sure. I have a Short on my channel if anyone wants to look at it and let me know what you think... I really don't want to take apart my bike if I don't have to

The link to the display manual isn't there in your description. This is it here (at least now 2024) ride1up.com/wp-content/uploads/2021/01/KD21C-Display-Manual.pdf

The link to the disc brake adjustment is broken.

Sur-Ron better

Thanks so much! I have a macwheel ebike that has zero instructions online so this was a massive help

Why was this so badass like wtf 😭😭😭