I love the mini man on the printer, so dumb but its great

Great topic, thanks

What should I calibrate first

I'm glad I found your channel. I gained a lot of information running this slicer!

so after doing several of my machines ive come into an issue. intial layer accuracy is a fucking ruinimg my there a modell youve made that wont include the intial layer for the dimiensional accruacy?. i need a way to measure model accuracy that doesnt include initial layer accracy.

I have tried everything and said in this video. Could there be a problem with my 3d printer

Hey I’m not sure if you can help me with this question but my filament in the middle of printing just stopped extruding and I can’t get the filament out cause when I tried to remove the filament it snapped inside the printer. What should I do?

I am using version 4.3.8.7058 and my menus look different. That's the latest I could find that included the Ender 3 Max Neo. What version do you use in this video? Thanks.

@DigitalInventor did a review of Creality Print 5 11 days ago (kzfaq.info/get/bejne/raqdbNmiscuZYpc.html) and he deemed it unfit for use by end users. I tend to agree with him.

I really liked your guide to get a nice top surface. Please could you consider how to get the same quality if that surface has (designed) holes in it? Maybe print your test tile with five holes dotted at random and see if prints smoothly now 🤫? I get artifacts after the holes because the hotend chooses to move all over the place now. Ive tried with some of the newer settings in CP (and Orca) but I cant get rid......

So I did everything how you said in the video but for some reason I’m seeing way more pillowing than I was seeing before I did the calibrations. Do you know why that could happen?

Oh my god so easy. I have been watching 3d printer videos for about 6 hours now. But your "straight to the point and no bullshit" video is all I need. Thanks for the help. / 3D noob from Sweden

Thank you for this video! I have Creality Print 5 on my Windows system and want to start using it more than the older Creality Print. Videos like this really help me learn how to use it. Question, if you know - Creality Print 5 is only available on Windows. Do you know when Creality will come out with version 5 for the Mac? I also use a Macbook - which has CP 4.3.

Excelente, segui todos los pasos y la impresión fue perfecta, muchas gracias.

Interesting information, thank you. It's summer, you need a trim!! LOL!!

On the Tower test I usually measure the seam as pressure advance will affect seam. There is always a clear spot along the seam where it looks nice.

subscribed. thank you! exactly what i needed to learn. please do more tutorials for creality print 5. thanks again.

Excellent tutorial, loved it, straight to the point, and very easy to understand and follow. Helped me a lot, Thank You.

Hey with creality print 5.0 i can't make gcode-file. I can export my project to an stl-file but that's it. I know there is a dropdown where you normally should be able to select another file type but there is none... Anyone any idea?

Great video. Comprehensive guide on how to get the best print settings out of Orca Slicer no matter what printer you use.

Your print looks like poop. boomer fail

Just to let you know the pressure advance test "PA Line" in back in Creality Print V5.0.3.8736 Release

How do you rotate the entire object?! It rotates all selected objects individually instead of rotating it to fit the plate!

Why does your Creality Print look so different? I have it for the Ender 3 V3 KE. Is it just that different for other printers?

Greate tips! Thank you. What else except the infill and walls the modifiers can do ?!

THANK YOU SO MUCH

I have learnt so much about Creality Print just from following along with Bill's videos. Instantly subbed just because of how easy he makes his videos to follow. I keep calling him CNC Kitchens long lost father because of how in-depth Bill goes! One thing I seem to be having trouble with is tolerances with parts fitting together so any tips for that would be much appreciated!

appreciate you. thanks

Thank you!

Link for Pronterface is bad

I’m getting a K1C so this video was really helpful

this dude will save you hours

Good video. Helped lots. 😊

Keep on keepin on...

got a K1 max and even +20 isnt extruding enough :)

i did start 0 to 1, and 1 to 2, with 0.002 sequence and i dont find any difference, is very ugly the line, im using V3 SE, is pressure advance maybe disabled on marlin?

For everyone looking for the marketplace add on it has been removed due to an alleged bug. Its a PITA but you can use the block support feature to place down where you don't want supports its very tedious process but it works for me.

creality print 5 looks and feels more like orca slicer, I wouldn't be surprised if that's what its based on

Thank you for making this video, Creality print 5 calibration flow rate is so different to Creality print 4, I thought 5 had a bug in it. Cheers

Good morning, your videos are the best, thanks to you I am learning how to use this software, since I have ordered a Creality Ender 3 V3 Plus and while it arrives I want to train myself, thank you very much for teaching us that knowledge. I want to ask you a question: How can I configure the Filament Cost, since I have not found how to do it. Greetings from Medellín, Colombia.

Ultimaker 3 Ext, about to setup my first. This Fundamental Step will be what and how I do it. Excellent X3

Creality must use a different method for determining the optimal flow rate for specific materials, because the pre-set values are set to 3 significant figures, e.g. the pre-set flow rate for Generic ABS is 0.926. Also, when it worked in Creality Print Ver. 4.3, using the Pass 1, Pass 2 method to determine the flow rate adjustment value, based on an examination of the nine rectangular test tabs, is not as straight forward as it sounds, because printing the nine test tabs with a Standard 0,2 mm layer thickness gives a completely different result compared to printing with an Optimal 0.16 mm layer thickness. Having to determine the optimal flow rate for every print profile available for every material seems to be a monumental task.

When printing do you use glue on your built plate?

This was a game changer. Tfs❤. I bought a used machine but it printed sooo poorly, everything was full of holes, it looked like a birds nest. Mine extruded 39mm😮 on the test the machine was at 93😮after calculating I had to push it up to 238.5😊. I was worried because of the huge diff, but I did a retraction test again and it pushed out 100mm exactly😊. Now I off to your Retraction tower, walls and the rest of your tutorials❤. I am brand new to 3d printing, much appreciated

Is it possible to import profiles from Cura

I have had this since shortly getting my M1 Max and love it mainly for just filament management. Meaning I do not have to go behind the machine to refill. But YES its has been a bonus as it has helped with OLDer PLA :) Love it .

Do you know of a way in Creality Print (V4 or V5 also is there a version of 5 coming to the Mac) ) to do sequential printing ? I have a project I want to print multiples, but I want to get the benefits of automation without the bed release . So I have a part I need to make a lot of and I am ok with getting 3 of this part printed at 12 hours a shot. (it take 4 hours to print each and I can fit 3 possibly 4(if Im lucky and the head does not hit it) and would like to be able to do sequential but I know its in Prusia slicer and Orca and Cura but I was hoping it was in Creality print. One at a time kinda a pain but 3 or 4 at a time but separate would be a bonus. Thanks..

Thanks, Bill for sharing this video. I appreciate your teaching style and diligence.

I tried to download and run 5, 3 times. Installed, uninstalled, and every time I open it, my cursor is off from the icons I want to click on. Like over 1/4" off. Only program i have the issue with. So uninstalled it again and gave up.