I had new tires place on my truck 4 months ago and still no problems. I put on the Nitto Recon Grappler A/T to my truck and they look great. 285/55/R20.
@johnathanhester480313 күн бұрын
Thanks for sharing this video. It made servicing my power poles a breeze.
@MWFishing10 күн бұрын
Glad it helped
@mach5jeep24 күн бұрын
Is that cheesy logo easily removable?
@kelleybrown691029 күн бұрын
Mine popped out and destroyed my cowl.
@MWFishing10 күн бұрын
Wow. I still use mine and travel quite a bit and have not had any problems with mine.
@PrettyLady7282Ай бұрын
when you add the spacers, does it affect the tire sensor (air psi showing on the kilometer screen)?
@CoinHELPuАй бұрын
Thanks for the video. I am sold.
@PNWBootMan2 ай бұрын
They turned out great looks awesome.
@Youtubeuser1aa2 ай бұрын
Those tires are ridiculously loud 😅
@jesusisoursavior26822 ай бұрын
nice video brother. do you have any isue about this caliper cover? is this not dangerous in the long run? how long it lasr
@MWFishing10 күн бұрын
I still have them on and have had not problems. I had new tires put on my truck around 4 months ago and again, have had no problems. I pull my boat long distances also without issue.
@OrlandoGarcia-ww8ik2 ай бұрын
Paso Way? Town lake
@MWFishing10 күн бұрын
Lando!
@TrashyLobster3 ай бұрын
Actual RC products are garbage imo. Hey but looks good.
@MWFishing10 күн бұрын
My first purchase from Rough Country. I haven't purchased anything else from them.
@marcusjohnson22563 ай бұрын
Did the wheels rub?
@MWFishing10 күн бұрын
No they did not. I also added Nitto Recon Grappler A/T to my truck and they look great. 285/55/R20. Still no Rubbing.
@fabimarsig3 ай бұрын
Are spacers Safe? for driving long distances?
@MWFishing10 күн бұрын
I haven't had any issues with mine. Being that they are 1.5 may be why. I dont know if bigger ones present issues.
@carterdwornikiewicz26094 ай бұрын
lol I rock 2x 2 inch spacers stacked
@MultiMuskyman5 ай бұрын
Do u have the truck leveled or lifted in the front?
@MWFishing10 күн бұрын
I dont. It is factory lift.
@Glock2095 ай бұрын
I’ve had them on for years. I use red Loctite and torque to spec not one issue .
@user-sh6ug3rt6m5 ай бұрын
I got one 3 years ago and is broken on the main post welds. This from just regular use going up and down highways to the lake. Absolute junk!. Buyer beware!
@user-wo8fg3qe6u5 ай бұрын
Ive had 2” wheel spacers on my Toyota Tundra for 9 years now with no issues, just make sure they are aligned perfectly and torqued to spec.
@knightrider37665 ай бұрын
I know that this is an old thread, i have a 2022 mustang gt 5.0 premium with 19" tires all around with 1.5 inch spacers rear and 1.25 inch fronts, I experienced no issues, i purchaed the quinn digital torque adapter from harbor freight, spacers are torque to 130 ft. Lbs, and rim lug nuts are 150lbs, no vibrations no issues, i recommends purchasing spacers from American muscles, or CJ pony parts, i also advised to retorqued the lugs every 50- 80 miles, just for closure qnd precautions depending on road conditions/pot holes, un even pavement ...other then that, i have no complaints
@piedmont9295 ай бұрын
do you think 2 inch spacers would work on a 2023 TB stock from factory on 20 inch tires. . TY
@MWFishing10 күн бұрын
I wouldn't know. May want to check with manufacturer.
@brucefuller53315 ай бұрын
you have a gentle voice replace the noise w. gentle music. the loud music doesnt add anything except i have to turn it down. BTW very good content
@MWFishing10 күн бұрын
thanks, my first videos. I have a better mic and setup for my next ones coming out. Appreciate the constructive critique.
@rickystutts60285 ай бұрын
I GOT ONE THREE YRS AGO - BEST VESMENT I EVER MADE . GREAT QUALITY .
@adamarriaga26266 ай бұрын
They said to knock off the weld cover and they will fit..can u show tht
@josemartinez-di6jp6 ай бұрын
Change ur wheels man, u can barely see the calipers😅😅
@musicfandad96036 ай бұрын
needed to see the finished product. Looks exactly the way I want mine to look. Sold and Thank you
@adamarriaga26267 ай бұрын
Does it come with spacers
@MWFishing10 күн бұрын
No, I added the in an earlier video.
@jordanross91577 ай бұрын
Thanks for the video man. Looking to do the same to my 2021 Trail Boss. Have you had any issues with the tires kicking up debris and messing up your paint on the body (after installing the spacers)? I've heard that can be an issue.
@MWFishing10 күн бұрын
I still have them on. I also increased my tire size so they stick out a bit more. I haven't had any issues with my paint. I wash my vehicle weekly by hand and havent seen any chips or scratches. I do know that when I run in dirty water, it does splash onto my truck more than it used to.
@demetriuslynch85287 ай бұрын
I just bought these for my 2022 refreshed silverado 1500 RST with 20 in wherls. Do you think ill need spacers?
@MWFishing10 күн бұрын
No, the spacers arent needed for the caliper covers.
@richardalexander18387 ай бұрын
Funny part is, your arm and wrist are vibrating like crazy as you're videotaping. lol.
@jalaljalal25187 ай бұрын
Most likely the tires, you can hear them roaring. Probably needs to be rebalanced
@losr983 ай бұрын
literally all i could pay attention to
@RaulGonzalez-fu1yb2 ай бұрын
Haha, I saw that too. No thanks.
@MWFishing10 күн бұрын
I was driving on some rough farm roads when I was looking for a place to shoot the outside wheel shot.
@jimelmore97288 ай бұрын
Does this cause the tire to rub?
@winchestermodel70446 ай бұрын
No
@jpicard818 ай бұрын
I got these for my 4runner and the little clips that hold the cover to the caliper are rubbing on the outer edge of the rotor. Took em off next day. Vid on my channel of the rubbing noise. They did look sweet though, but.......if these come off while ur going 50mph, ur rims are gonna get destroyed. Probably rip ur valve stem off and possibly smash the brake lines. Just not worth the risk for me
@thetimeznow73638 ай бұрын
Plenty of vibrations while driving, yikes😂
@MWFishing10 күн бұрын
that's the road I was on.
@user-xx3zd3hg2v8 ай бұрын
Thank you, ordering one today!
@0isbrabra0in9 ай бұрын
@1:55 you answered my exact concern so I don't have to go take a wheel off to look. Thank you
@michaelwilson195810 ай бұрын
Do you think there would be enough room in the gap if you only used a 1 inch spacer? I only need 1 inch but don't want to grind the studs down.
@MWFishing10 күн бұрын
should be. I didnt have to grind the studs on my 1.5" with 20" factory wheels
@randispallina2311 ай бұрын
1.5 looks perfect. Same stick wheels that I have on my RST. Ordered them.
@MWFishing11 ай бұрын
I get asked regularly if I added larger tires.
@Keepit10081 Жыл бұрын
Some people say power steering fluid works as well. Is that correct?
@MWFishing11 ай бұрын
That’s a new one. I’d go with the recommended fluid to be safe.
@joshuajadolon3591 Жыл бұрын
Thanks for this! I am definitely getting one!
@MWFishing Жыл бұрын
Glad I could help!
@NytronX Жыл бұрын
The music is a cool 12x louder than your speaking voice.
@Ellacost831 Жыл бұрын
Are thise screws removable? Im planning on painting these a different color
@MWFishing Жыл бұрын
no, they looked molded
@watchmanexpert Жыл бұрын
5.3 or 3.0 trail boss ?
@MWFishing Жыл бұрын
6.2
@michaelnavarre8307 Жыл бұрын
Did you have to chance the Ferrule fittings on the pumps?
@MWFishing Жыл бұрын
I did not, just unscrewed and put back on.
@erickgalloway1393 Жыл бұрын
How these holding up so far? I just purchased a set for my 17 silverado, got aftermarket wheels coming with a -25 offset so I’m hoping there isn’t any issues with the fitment with these. Great video thanks
@MWFishing Жыл бұрын
holding up well. no problems. Pulled my boat 2 hours last week and didn't notice a difference.
@bobbylee5351 Жыл бұрын
Thank you for the video and help. Can you tell me how many I need to do 2 power-poles?
@MWFishing Жыл бұрын
I bought 3 quarts and have 1 left over for refills.
@rosaliom6 Жыл бұрын
Do you have spacers ? Does it make it hard to install or won’t fit if you have spacers/ adapter?
@ajmus038 Жыл бұрын
RC website says spacers may be Needed on factory wheels.
@MWFishing Жыл бұрын
I do have spacers. You will need them. kzfaq.info/get/bejne/gZ99jdSa0KfKn3U.html
@toddc.4749 Жыл бұрын
Look great 👍
@MWFishing Жыл бұрын
Thanks 👍
@chadkauffman2744 Жыл бұрын
Very nice
@MWFishing Жыл бұрын
Thanks
@tylerangel4073 Жыл бұрын
How are they holding up
@MWFishing Жыл бұрын
So far so good
@ryantoups7983 Жыл бұрын
Glad I finally found a vid that clearly explains the older pump style. I changed out a busted blue hose and it’s locked up on me, stuck in the up position. I think that I understand why. I guess that’s priming the pump the last step I’m missing? Thank you for sharing!