How To Install: Chevrolet Silverado Trail Boss Truck Wheel Spacers

Рет қаралды 31,120

Жыл бұрын

1.5 Inch Wheel Spacer. Adding a wider stance to my 2021 Chevy Silverado Trail Boss. Mammoth 1.50 -Inch Billet 6-Lug Wheel Spacers.
Ordered from at Amazon: amzn.to/3kQBbtA
#silverado #trailboss #chevy #spacers

Пікірлер: 56

@musicfandad9603 5 ай бұрын

needed to see the finished product. Looks exactly the way I want mine to look. Sold and Thank you

@PNWBootMan 28 күн бұрын

They turned out great looks awesome.

@JohnD0129 Жыл бұрын

Awesome video brotha. From one Texan to another 🍻

@MexicanMovie Жыл бұрын

Added to my favorites, thanks a lot !!!!

@MWFishing Жыл бұрын

Thank you too!

@huntershort7936 Жыл бұрын

Great content! Keep it up!

@MWFishing Жыл бұрын

Thanks, will do!

@urquiagabro8252 Жыл бұрын

Great vid, looks great!

@MWFishing Жыл бұрын

Thanks!

@randispallina23 10 ай бұрын

1.5 looks perfect. Same stick wheels that I have on my RST. Ordered them.

@MWFishing 10 ай бұрын

I get asked regularly if I added larger tires.

@wallacedalton485 Жыл бұрын

I’m in, you sold me. Definitely doing it soon

@MWFishing Жыл бұрын

Posting my follow up vid shortly. I am still happy with them.

@MrDutch1e Жыл бұрын

Red lock tight seems excessive. Will be basically welded together if you ever gotta take them off again. Blue would be better I'd think.

@anthony2558 Жыл бұрын

It's easy to pop red. I don't think it's made like it used to be.

@MultiMuskyman 3 ай бұрын

Do u have the truck leveled or lifted in the front?

@CustomWheelAdapters Жыл бұрын

If it’s light, than is most likely just aluminum cast. We make our adapters with 6061 t6 billet aluminum and we are experts at what we do! Let me know for any wheel adapter needs

@MWFishing Жыл бұрын

thanks for the info

@alexalonso8049 Жыл бұрын

wish you would’ve shown an actual walkaround video of it from the outside. hard to picture the stance from 2 ft away from the truck inside a garage. otherwise very nice video.

@MWFishing Жыл бұрын

Noted!

@fabimarsig 2 ай бұрын

Are spacers Safe? for driving long distances?

@marcusjohnson2256 2 ай бұрын

Did the wheels rub?

@GRIPPED Жыл бұрын

Couple questions. You said you had 20 Inch wheels but those look like my 18 inch wheels that came stock on my '19 trailboss. Can you confirm those are 20s and not 18s? Second question you said the rim has enough space where it can fit flush against the spacer even though the factory stuck stick out past the spacer slightly?

@MWFishing Жыл бұрын

Tire size is LT265/60R20 / 20" OEM. The back of my rim is machined out where the rotor lugs line up. The stick out very little past the spacer. like 1/8 of an inch.

@juansantoyo6463 Жыл бұрын

I just added some method race wheels on my truck and leveled the front 2.5” . My brake caliper and rim is like a credit card space 😅 wondering if these spacers would solve that problem and give and give me more space

@MWFishing Жыл бұрын

yes, the spacers were needed. The front wheels would have rubbed if not.

@erminioandres5656 Жыл бұрын

Hey Bobby I have a Chevy 2021 trail boss I got some spacers but it didn’t fit on my stock wheels the middle ring didn’t flush in with the wheels and the spacers. Did you did something to fit them in that will help me?

@MWFishing Жыл бұрын

I did not have to do any modification to the rotor or the spacers. My OEM wheels (20") worked fine and are machined out where the original lugs stick out slightly. The ones I purchased in the description worked great.

@crazyboonie9636 Жыл бұрын

Need hub centric spacer. A must if you wanna run spacers!

@DeepStack70 Жыл бұрын

The lip on the spacer. Is it suppose to fit into the center of the wheel? Meaning the spacer is sitting flush to the wheel. That lip on the spacer is giving me a 1/4” gap from spacer to wheel. Is that normal? Thanks.

@MWFishing Жыл бұрын

my wheel is flush with the spacer. I had to move it around to make sure I was flush.

@soundcheck5247 Жыл бұрын

I noticed only 5 of 6 lug nuts for the spacer were secured using the torque wrench - the last one was not tightened. Maybe video editing…

@MWFishing Жыл бұрын

Could be right. When I rotated my tires afterwards, I double checked the tightening on all the spacers to make sure that none of the lug nuts were loose. Thanks for watching out!

@jlerma7826 Жыл бұрын

Did you have any issues with the spacing when turning

@MWFishing Жыл бұрын

No, I have not had any issues at all.

@metheelectric2733 Жыл бұрын

Did u had to cut the Oem lugs to fit the spacer?!

@MWFishing Жыл бұрын

no, the lugs stick out just a little bit but were not affected by the rim because the OEM rim on my truck is hollowed out where the lugs would normally touch. If that makes sense.

@richardnorthern9983 Жыл бұрын

Great video I don't want to be that guy but when using a torque wrench you only want to use the bottom part of the handle, the grip. Using the shaft in combination with the handle will throw the torque specs off

@MWFishing Жыл бұрын

Thanks for the tip

@branndonwilliams5079 Жыл бұрын

You went with the hub centric right?

@MWFishing Жыл бұрын

yes, correct.

@themanthelegend7048 Жыл бұрын

I would use blue threadlock. Red is permanant.

@MWFishing Жыл бұрын

Good to know. I used what was provided

@rollanbaluma7744 Жыл бұрын

Do you have rubbing issues full turn to full turn?

@MWFishing Жыл бұрын

No rubbing issues at all.

@jll7039 Жыл бұрын

Any issues with the spacers so far ? Thank you

@MWFishing Жыл бұрын

I haven't had any issues with them. There isn't any difference in the drive to me. I pulled my boat at 70-80 and didn't notice any difference either. So far so good!

@MWFishing Жыл бұрын

I posted my follow up video