Popeofjohndeere... Not sure if know this or if you would want them but you can get the exact same wrenches as the Mountain double box flex head ratchet wrenches in the Icon line at Harbor Freight. They are lifetime warranty to. I have them and so far they are nice.
@RenegadesGarageКүн бұрын
Popeofjohndeere... New sub here. Love the "if they make it, ya gotta have it".. I've used that saying before. When people ask why do you have so many tools? I say because they keep making them!!
@neilmays67443 күн бұрын
You proved nothing lol
@joshbrown13813 күн бұрын
Love the snap on collarless wobbles. I’ve had all cheaper wobbles for most of my career. I got a mixture of snap on and cornwell usa made wobbles and they make my job so much easier. You gotta get the snappy 3/8 low profile wobbles also.
@ShawnC80303 күн бұрын
I think if you have to put that much force on an open end wrench its time for another tool. Also for the price that milwaukee bested the snap on. Is the snap on better sure but at 700 a set it better be. Will you ever be in a position to use a wrench like that? I havent and been wrenching since 1992. It gets to that point i go to something else. You are going far beyong asme spec. So yes in that regard price and value milwaukee absolutely wins
@ILwoodsman4 күн бұрын
Great tool box tour. Much appreciated sir. Thanks for sharing.
@alexandershultz99135 күн бұрын
wish my toolbox looked like that as a heavy diesel mechanic. :D Gonna be a few years before I get it lookin like that, hopefully im in a truck by then lol.
@jameshill49005 күн бұрын
Crazy impressive. This a hobby or business fixing these small tractors?
@agtech45807 күн бұрын
You are going to be disappointed in the in line wire strippers worst thing I ever bought
@n1ztb7 күн бұрын
That's sweet 👍🏻
@calebbouchillon8 күн бұрын
"gotta have it"..... 😄 love it
@DillonDaVillain2228 күн бұрын
I like the way you think dude! I just did the same thing on the Matco truck since I seitched work places I have to drive ti kert my Snap-On guy since I don't want to transfer my account to a new person I don't know lol
@tomwinslow50869 күн бұрын
$50.00 a week for the next ten years. Nice haul though.
@jaymechanic12289 күн бұрын
Dude sell a tshirt with " gotta have it " on it haha. Id wear that when going on the truck. Just subd from the uk. Do u have a part no for the 3 piece instinct handle pic set?? The big ones?
@Nordman55510 күн бұрын
The snap on dealer in my area is the sadest excuse. When i went on his truck i got depressed and its like pulling teeth trying to spend money
@victorhoyt435210 күн бұрын
Is the phrase at the end of the video a play on another tool/mechanic youtuber or a dig? Or is it just a coincidence that it sounds very similar?
@popeofjohndeere10 күн бұрын
@@victorhoyt4352 more than likely just a coincidence lol didn’t know anyone does anything like that
@598camaro410 күн бұрын
Hail snap on... screw harbor freight
@popeofjohndeere10 күн бұрын
@@598camaro4 Amen brother!
@akovic10010 күн бұрын
Is LC, Liam Cunningham in Leominster, MA? I would like to get a set of those custom stubby screwdrivers.
@popeofjohndeere10 күн бұрын
@@akovic100 yes it is! Hit him up!
@paulcarpenter634510 күн бұрын
Got to have it, words to live by.😅
@superairdave10 күн бұрын
Awesome haul!!! Thanks!
@larryburns460510 күн бұрын
That gas torch is junk
@mikereisner33359 күн бұрын
I've been really happy with mine
@edwardkramer87385 күн бұрын
You must not know how to use it lol that thing is bad asss
@larryburns46055 күн бұрын
@@edwardkramer8738 my dealer said most he sold have been returned, use it and won't shut off nothing to do with me it was jun went back to power probe torches
@puremayhemFTW10 күн бұрын
thats about 5gs
@JJJobson10 күн бұрын
You bought out the whole truck 😂 Tell us what the Damage was on the massive gotta have it haul? I’m gonna say $4000
@popeofjohndeere10 күн бұрын
Didn’t get or want the receipt 😂😂
@JJJobson10 күн бұрын
@@popeofjohndeere 🤣
@JJJobson10 күн бұрын
@@popeofjohndeere just tell me if I was over or under 🤣
@edwardkramer87385 күн бұрын
@@JJJobsonif there was no deal on any of that, 3900, that wrench set of the flank drive standard wrenches is about 7 hundo alone
@edwardkramer87385 күн бұрын
Those are not even close to tub o towels those snap-on wipes are garbage.
@sizzleneck10 күн бұрын
Now that's a real professional no substitutions tool haul 👍🏼
@smoke72610 күн бұрын
Awesome haul! Great stuff
@justinvanburen825910 күн бұрын
Hell, yeah that’s an awesome tool Hall there some really nice additions to your set
@JackDaniels-v6f10 күн бұрын
Harbor freight copied one of those pliers. Those big china wrenches and sockets work! Exceot for the lawnmower deck, I haven't used any SAE in decades. I took all the SAE tools home in the 90s. Sometimes I wish I had those Blue-Point stubby ratcheting wrenches, but they want around $400! The Williams version is on ebay for $159. I think most people who use larger sockets and wrenches purchase chinese or Wright or Snappy industrial or old Williams. Proto ain't bad. An impact universal and socket will work most of the time. It is the only thing that will work if there is a short bolt or stud sticking out. Those swivel impact sockets might not work in this situation. Snap-on shallow well 1/4 drive chrome are shorter than all others, and sometimes they don't work either. The Snap-on midget 1/4 dr ratchet is pretty to look at, but won't break anything loose! Sunex screwdrivers are pretty good too. Only $77 for 20 screwdrivers! You can beat on them lose one, and don't cry over it. The less you spend, the more money you made. Someone asked me, which cordless ratchet or impact is best? Hell they all work. Got DeWalt or Milwaukee batteries already, then buy that brand. Today even harbor freight Pittsburgh ratchets are better than Craftsman USA or SK. I took some chevy truck lugnuts off with a shallow well 1/2 drive Gearwrench chrome socket and ingersoll Rand impact. A 12 point Gearwrench socket, and these lugnuts were crazy tight! Cheap tools are shtty quality, but many times they still work good. Sunex impact sockets last longer than Snap-on. You might not always have a Snap-on dealer.
@scottaddison807110 күн бұрын
Tools that never will be used
@mikeflynn565110 күн бұрын
Price of the toolbox you could have all the SNAPON tools lol, Harbor freight has some decent tool boxes
@ringerlandscaping60810 күн бұрын
Who’s Lc¿
@scottaddison807110 күн бұрын
Got to have it….,,,did you pay cash for it???
@popeofjohndeere10 күн бұрын
@@scottaddison8071 try to at least. RA account racks up quick
@scottaddison807110 күн бұрын
@@popeofjohndeere so does the family grocery bill. Which comes first?
@popeofjohndeere10 күн бұрын
@@scottaddison8071tools always come first…. They make the money for the groceries….
@RenegadesGarageКүн бұрын
@@popeofjohndeere Exactly!
@tonycroteau926411 күн бұрын
Great video 👍 nice haul
@cajunoneforchrist11 күн бұрын
Experts say food will skyrocket in October. Better be spending money on stockpiling food
@cblack186316 күн бұрын
I know I'll probably sound like a mongloid asking this, but what did you mean by left, right and straight hex drivers (blue point)? I've got a large collection myself and thought I knew tools, but you had me on those and those SO hydrolic line sockets I've yet to see. Really sweet set-up man, thanks for the tour! I was gonna bust you for not having the PWZ's in your plier drawer but we know what happened to that idea in the second box lol
@popeofjohndeere14 күн бұрын
@@cblack1863 they’re kicked 35°? To the left. One to the right. And one straight.
@JosephMcCanne16 күн бұрын
Honest question… not trying to dump on Snap On because they are a great brand, but how in the world is that light well worth $80? (14.5 minutes in)
@popeofjohndeere16 күн бұрын
@@JosephMcCanne go hold and use a harbor freight one. Then go hold and use one of these… quality is sometimes something you can feel and witness when you have something with quality
@nathanfogel460817 күн бұрын
Oh damn I never knew the older 84 inch epiq’s had the 68 inch long drawers and the new 84’s only have 60 inch long drawers. Thanks for the information, I may just get 68 inch epiq then
@sally645718 күн бұрын
Nice box! The 25/32 socket is for the European Ford wheel nuts, they have a nickle cap that expands slightly over time. There should be another one available a fraction larger than a 3/4" for the bigger models.
@twentyonehertz19 күн бұрын
no cordless ratchets?
@popeofjohndeere19 күн бұрын
@@twentyonehertz they’re sitting in the hutch. Watch the first few minutes
@twentyonehertz19 күн бұрын
@@popeofjohndeere ohh i skipped around and that included the first 30 seconds I guess ahhah.. I was like holy shit this guy doesnt use a cordless ratchet what is going on here LOL.
@tonycroteau926419 күн бұрын
Nice setup Great video
@JJJobson19 күн бұрын
Nice set we are her for you at 1 800 SNAPON ADDICTION. Our modo is one HF tool at a time 😂😂😂 Hey At least your life savings did not take a dump in the stock market the last few days. Just jiving you, I am totally envious of your tool collection
@TubOTowels19 күн бұрын
That yellow tub is easy to spot! Awesome!
@SJWEQUIPMENT19 күн бұрын
Nice set up 👍🏻
@mikepappas641519 күн бұрын
I like what you did there.
@chrishoesing545519 күн бұрын
Are you independently wealthy and you're just working to stay busy?
@popeofjohndeere19 күн бұрын
@@chrishoesing5455 I’m actually in debt up to my ears
@russellpottenger858418 күн бұрын
@@popeofjohndeere
@russellpottenger858418 күн бұрын
@@popeofjohndeere Lol 😂, we’re probably in the same boat. I have a 72” stainless top Master series pretty much filled up with Snap on, Mac, and Matco. I have a similar tool addiction and hate not having the correct tool for a job when I need it
@Saw_Squatch20 күн бұрын
Phenomenal setup! There are a lot of shops not willing to invest 1/10th of that in having the right tools for the job let alone invest in that level of quality
@cunninghamscadets892420 күн бұрын
Nice box, your welcome for the warranty's and filling those gaps!
@robbybachmann806120 күн бұрын
I wish I had this toolbox but I'm just a broke dairy farmer.
@ThatMowerMan2 ай бұрын
Aren’t only like 16 sets known?
@danlandmand2 ай бұрын
So sad to see that the guy who painted it completely ruined everything original. Very poor paint job :\
@popeofjohndeere2 ай бұрын
Did you watch the video? The entire tractor is custom made from a 317…. Nothing about this is original. And the paint job was all nicely done powder coat….
@queenofspadz2 ай бұрын
When the blade is rotated so that the teeth are facing the 3-point hitch, it's more commonly used for back-filling (ditches, etc). We didn't use ours much for dragging that way but I suppose it could be done. I prefer rotating opposite how you did in the end of the clip. For these to be effective your tractor needs weights on the wheels and decent tread. Note that the heavier the tractor, the more compaction you get which works against you when ripping/pulling dirt.