Shite drone

👍 Great topic

im using a hglrc m100 5883 gps module and can get 17 sats indoors in bf

What OSD is that? Looks good

As you say, power isn't always the answer. Propagation characteristics of radio signals at specific frequencies are not going to change just because you are 'shouting louder'. 3GHz and 10GHz are used for maritime radars as they love to bounce off objects. Our VHF sets are supposed to be used at 1W for everything except emergency comms (25W). The propagation difference between those modes is barely discernable. The reason you have a higher power option is to try to drown out interference (other transmissions on the same frequency), it isn't suddenly going to start acting like an MF/HF signal.

Well, dang,... Would happily use that day time footage in a video production. Wonder if Caddx would ever make a clip on Anamorphic + ND filter?Price for the drone/goggles combo is less expensive then a Mavic Air 3 with controller and no goggles.. the difference would be enough to pay for a TX16S for the GoFilm Combo and still have some dollars to spare.

Great topic, thanks 👍

any advice to set them u? i have a sniclo and by default, it slightly turns left. I'm trying to find how to set the default direction to absolute straight? any idea? thx much!

How does balancing work while parallel charging

Never got this ending from what i remember. Just getting blown to shit on the boat

great video! I gues at 4:50 you adress the same problem, i Have: I want to attach the Vifly to a Mamba F740 with just 4 ports on the GPS-area and 2 seperate ports on the Buzzer-Area. So what did you do with the "remaining" BUZ-cable??

Does anyone do a 10w vtx in the 900 meg range? This looks like it would be suited for flying low over forested regions, or through the trees, or through obstacle courses without many drop outs.

You are mistaken that is't a VTX that's an Ofcom alert device.

I love this stuff, Takes me back to my career as a teacher, god i miss it, exellent, ! We had to put 2 gps at each corner of an tc losi and this could calculate the drift and then the MSc students would scale it and run a simulation, was a brilliant project!

Nice video! What would you think about mounting one antenna on the top of the quad and one on the bottom? I've purchased the Avatar HD Pro and I'm thinking of best ways to have max range for a jack-of-all-trades 5 inch. I found a free 3D print mount in a Y-shape for the dual antennas that goes on top of the quad behind the battery, but what if I were to have one antenna behind the battery and one below the quad?

Great job CK ... Just a thought but how about trying it in a boat water is flat right ?

All that green foliage is like a giant signal sponge on 5.8G... The 1.2g setup should be better on far less power....🤔😏🇬🇧

i use a caddx ant aio camera on 2 servos to fpv crawl

Does this work with the ender 3 s1 pro?

i use a 1 watt rush tank in my crawler and can go 600 yds to woods clear but go behind my shop ,, terrible

BF needs to travel in a straight line at a certain speed before that arrow works. Not sure the minimum m/sec but a car should be able to do it.

Looks like great fun. Thanks for the show and tell

Fantastic ride and testing, Wayne! 😃 I've never tried to run over big grass like this... It's really hard! 😬 I've been far, but I don't have much idea of how much, because I've never used a GPS... But it definitely sounds like a great idea! Anyway, stay safe there with your family! 🖖😊

@CurryKitten yes, BF AIO works! Have a look at some of my vidoes, where I used a BF AIO to provide the arming signal to the Vista and O3 on my EDF and plane. Kinda expensive way to use an AIO for just for the arming but it works! I previously used it on my 64mm Rafale with BF AIO and Vista (crashed and burned last year) and recently my PA-18 Super Cub with BF AIO and O3. Had an 80mm F/A-18 with Inav with O3 but removing it and just using a BF AIO soon.

Drone with repeater in the sky distance savior

2 things, I think it has a direct drive main motor and the other is I think the off switch is so you can turn off and on the optical flow sensor, I think??

I wonder if your home arrow was having issues because you were unable to go directly forward to begin with. • Notes from Betaflight…..without a compass, the quad 'learns' the heading of the quad from the direction of travel over ground from data provided by the GPS. The craft must be travelling at least 1-2m/s, in clean nose-forward flight, for at least several seconds, before its attitude can be correctly determined from GPS data alone. Always fly dead-straight after take-off, in clean pitch forward flight. If it is windy, fly directly into the wind, or directly with the wind, so that the flight path over ground matches the orientation of the quad. Check that the arrow rotates and points to home after short period of straight flying like this. Typically some 30-50m distance is required. If not, return, power cycle and try again.

Reminds me of my old 100w CB Burner....

Camera on a stick would really help you out with navigation! Great fun video. I want to make a betaflight truck now!

Lovely. Thanks so much for your video. Now I know well what this tiny robot can do. I will order one for me and my son to play together.

To avoid spaguetti: - Make sure the bed is properly leveled, play around with the screws or use metal washers if needed, should be less of a 0.4 difference in numbers when doing the bed leveling. - Wash the bed in warm water with dish soap, avoid putting fingers (they are usually very oily) on it.

For some reason I cannot connect no matter how hard I try, I’m using the Radiomaster Zorro with the ELRS dongle

Bonjour, merci pour cette vidéo qui m'a aidée à décider de l'achat du speedybee. J'ai remarqué votre sangle de lunette avec port batterie à l'arrière. Pourriez vous m'indiquer la référence de ce produit s'il vous plait. Je vous remercie d'avance. Ylias.

I replaced the original antenna i smashed with a flyfishrc osprey, i just use a direct ufl one, there is alway loss in the cable and connectors so i get the shortest that will fit properly but still has the element up above my battery a little and it definitely seemed to be alot more stable then the original! So now i just toss the original that comes in the vtx kits! I will say Walksnails newest antenna is improved, but i trust the flyfish more... I have tried the rush since too cuz they was on sale on AliExpress, i really can't tell the difference between the cherry and osprey, the osprey just has better selection and availability. But newbeedrone has a cloverleaf ufl i put on my 85mm ws and it is way better yet! It's just not as durable but on a super light weight build its fine also the length of cable needs more selections

I have this phone for 4 days now, i use it for when I am in bed or places a Tablet or TV ain't a thing to watch youtube, movies or games, so I don't ruined the battery of my actually main phone. currently it has 24 Hours used, games and video watching and so forth and its around 22% now EDIT- I have a feeling android 14 is not coming for the WP 19 pro :/

Nice review Curry. Had it on a specwing for about a month now. Was planning on testing at popham but the motor was playing up. Looking forward to getting it on the led course

You talk too much and it can be boring for some people. Just a simple non spoken video would have been better 😢

ufl to SMA definitely not easy to find! Tend to be a bit long for easy mounting on a quad as well. The ufl interface is probably my least liked thing about walksnail. Have a pair of albatross 100mm LHCPs on a Moz7 with Avatar twin antenna VTX, performance is fantastic.

is it waterproof?

that's also improve gps signals b yX2 ✌

8:40 you should get Iflight Albatross V2. It has a 150mm stem. It’s amazing.

Huge improvement with the taller/better antennas! Regarding the vibration, did you restore the iFlight filters after upgrading to Betaflight 4.4/4.5 and the new motors? The C7 will do that with the default filters. I think it has to do with the ESC (Succex/Blitz) causing gyro noise at 24khz PWM. I changed the PWM frequency from 24khz to 48khz and it cleared up the gyro noise enough that I was able to remove the aggressive iFlight filters. Anyway, just a suggestion.

i built an AOS UL7 Recently with walksnail avatar pro and used ufl to sma and 2 cherry rush extended, and my god the range difference at lower altitudes is crazy for me

Awesome flying and testing, Wayne! 😃 Those are definitely great antennas!!! Stay safe there with your family! 🖖😊

What does focus mode actually do? I noticed the grass in the fields were noticeable different colour wise on way back between Antennas.(walksnail was worse)

I try to connect with radiomaster zorro but can’t connect. Is there any solution ??

Nice review! Just wondering how you feel it compares to a Mobula8 or Bassline for agility noise and general flyability? I'm guessing it's a fair bit noisier as it is a lot heavier for the same size props.

Good review of a great little Quad....if of course your using or have access to Walksnail Goggles.

Great review!!! That mushy night image goes away if you turn off the noise reduction in the goggles menu. but then there's more grain but its way more viewable than the mush 😎

If you turn 3d noise reduction off, it will probably reduce the artifacting at night