Dude you didn’t wash the jars!!!

Thank you for this video 🙏🏻

Good video - gearing up for blackberry jam this year as the bushes are looking very promising. Great for me as I don't like the seeds in jam.

Good video, remember that engines run on combustion and motors with electricity.

Thank you for your excellent video and detailed commentary. This will help me a great deal and I learned a lot. You mentioned the phone charger and I understand that it goes into the bottom electrical outlet. Where does the other end go?

You have given me pause for thought regards the 1.75hp motor bogging down. I have been using a DeWalt jobsite saw for several years now, which has a 2hp motor, and I can't say it has ever struggled, even with some very dense hard and heavy timber. It never occurred to me the the F2 might struggle. Is your saw 110V or 220V? Does that make any difference? I am in NZ and we only have 240v or 415V three phase.

Dogs are dogs, they come from Wolves and coyotes, they have large canines for a reason. The problem is not with the dogs it's the owners. If i own a pet tiger that kills your ducks well people will loose their minds. Keep the dog away from the duck regardless of your feelings, things can turn instantly with wildlife and your helpless Hey baby your ok

Nice video... the music, distracting and adds nothing. Keep up the nice work.

Sometimes I gotta force myself to throw away scrap wood lol

Our top hat 🎩 duck was bitten in the front chest!! We are not sure what attacked it. 😢 Possibly a fox? What animal goes into a chicken coop and just injures the animals without eating it?

Hahaaaaaa!!!! Scrap Wood….!????!🤣

Question about the switch. Why is the switch needed? Just so that you can shut it off so the relay does not over heat? I bought the relay and it came with a heat sink device but there is no way that device will fit in the deep electrical box. If someone has to remember to go to the dust collector to shut off the switch for the relay or even put the switch somewhere close to where you work, then I am not getting the idea of automating the DC to come on by opening a blast gate. I mean I get the convenience of any blast gate opening would turn on the dust collector and shut it off, but then we have to remember to flip that switch. I am not liking that option because then it would be easy to forget to turn it off. I have a remote for my DC and after watching several other videos on doing what you have done, and after wiring everything to make this blast gate automation, I am now stuck with the idea of having to remember to turn off a switch for something you cannot see or hear running. I was thinking why couldn't I have use an alexa enabled switch instead of the one I bought. That way maybe I could out some automation in place that says if the switch is on for a certain period of time, turn off the switch or send me an alert that it is on for say 30 minutes or an hour. Thoughts?

Please educate yourself on power it is not referred to as phase one is referred to as single phase. And three phase

Good review. But. The background music is annoying. When TRYING to watch this video on my 80 in tv. The music drowns out what you are saying. I have to use phone to hear your remarks. I am not here to hear a concert. The sounds of tools running is music to my ears.

No chips on a sander! Those veins create some turbulence and also keep the dust port from collapsing!

She's so beautiful 🥰

So sweet ❤🎄

Guy buys a 1.75 hp saw and complains ot doesn't have enough power.. lol Thats why they make different HP options. Also, its called single phase. It isn't a classification, its just how many phases the circuit has.

My duck was murdered by my neighbor's dog

What is the recovery improvements like for her now how is she doing did she make it

I bought the exact same one I think he black and Decker has more power than this thing

Too much playing camera isn't on what you're doing so it's not much help.... Sorry.

Thanks for the info. You may want to correct the misspelling of “table”

I'm confused. The negative is low power and having to go slow with oak. Later, the positive is the power. So, which is it???

Do you have hot water bath the jam?

Thank you for your wonderful video on how to care for a duck that’s been injured. We had a duck injured by a hawk and the whole backside of his neck is showing where are using some of your techniques to help restore it to health if that’s possible to do her injury was much more severe but thank you. You’ve helped me a lot.

Left video, music got irritating

please please please i need help 🥺. i have 4 ducks. last night a cat attack one of my duck. and bite his neck he got a puncture in his neck😥. when he drinks or eat anything comes out from his neck hole😢😢. I don't know what i do to save him?? please help me. btw he walking and roaming around

Such a great video! Amazing job helping the Duck heal.

are these milled to 2.5"?

Part number? I’m having a hard time finding it

😮😮 my neighbors German shepherd husky mix looks IDENTICAL to yours expect he’s male 😮😮😮

I keep a large bird coup with several chickens, roosters, ducks, and a turkey.. we have them separated into groups by age and we recently got two duck hatchlings at ab 3 weeks old… they’re currently ab 5-6 weeks old and unfortunately, something has been breaking into our coup and hurting(killing) our birds.. the night before last, whatever it was, beheaded one of our two young ducklings… I found the rodent’s entry point and filled/covered it with heavy rocks, secured the chicks in that enclosure and last night, I secured the remaining duckling.. I didn’t get to do all that yesterday until dusk.. so I guess, in the dark, I didn’t realize the remaining duckling is also injured. There’s no way he could’ve done this to himself in the enclosure I secured him in last night. So I’m reckoning that this duckling tried to help his brother during this attack the other night and got himself either bit or scratched as well. I went to let him out of the enclosure I put him in last night and noticed blood on his bill and on his foot, as well as scattered throughout the hay in their enclosure.. so I figured I’d take all the hay out, and clean out the entire enclosure to get the blood and it’s smell out of what’s essentially this duck’s bed.. and I figured when I was done with that, I’d take this duckling and give him a bath so he isn’t stuck smelling his brother’s blood.. when I let him out of his enclosure this morning, he went straight to a corner in the coup and laid down, he isn’t making much vocal noise and at first, I just thought he was emotionally traumatized.. but his left wing is cut open in at least two locations. I’m still not quite sure how bad the injury is but I don’t think it’s life threatening. However, Ik an infection could change that. What do I do to clean him and dress his wounds? I was initially planning on bathing him with dawn dish soap but now that it’s apparent that he has an open flesh wound, idk if that’s safe to use. ANY AND ALL ADVICE IS GRACIOUSLY WELCOME.

Excellent review, love the assembly preview. I just bought one, have heard lots of Naysay about the belt tracking and underpowered motor. I plan to use mine for fine finishing of smaller workpieces like end grain cutting boards and butcher blocks, frame edges, small furniture pieces, game boards etc. I do not feel like i will have these issues. But I can see how it would definitely draw a lot of amps if the work piece is too large and/or unsupported. I mean, this is just an overgrown benchtop machine. Maybe it is one of those machines that is screaming for an outfeed/infeed table. :shrug:

Have you noticed that the miter gauge cannot be inserted from the front. You have to walk around the back to access it? What is your opinion on this?

Where was YOUR saw made ? Taiwan ?

Does the fence actually stay true when setting up for a measurement? My current table saw when I set my fence to say 8 inches, the place closest to the fence handle will be 8 inches from the blade but the far end will be 1/16th of an inch off or so. So I have to constantly measure the front and back of my blade to the fence and keep taping the fence over and over again to make sure I'm perfectly parallel. I'm wanting to upgrade my saw and love the SawStop but the Laguna F2 seems perfect for my needs, with a lower price tag. I just don't want to have another fence with this issue

How much did the pencil cost when you borrow yours looking to buy

Little clarification - the 3 and 4 post on the relay are sensing DC voltage - it won't sense DC voltage until the blast gates are opened therefore completing the circuit of the "Phone charger" which is really just a DC power supply. Once the relay senses DC voltage on the 3 and 4 posts the contacted closes completing the circuit on the 1 and 2 posts. Basically once the 3 and 4 posts sense DC voltage it shuts the "Relay" in the SSR and completes the AC circuit starting your dust collector.

My duck attacked by cat what can I do how can I treat

I veiwed in your video that the right side of the outlet had the break off tab removed but the left side of the outlet where the neutral is located at the bottom was not removed, my question is should both sides of the outlet have the break off tabs removed? And I am finally find a video I was looking for. Thanks a mil.

Kas teenite sellega elatist??????!

How are we supposed to watch the whole video without getting dizzy !!

Did I missed something most important info regarding the power cord, is it comes with plug or only cord? Thanks

As an old carpenter/cabinetmaker i think I can say that you should never stand of to the right of the fence like that. You should stand off to the left of the blade always applying pressure towards the fence!!!

would love to see how the guitar holder works and looks while holding a guitar

Our duck seemed to get trampled by our dog, no puncture wounds but he isn’t able to walk at the moment, no visible signs of a broken leg, but not sure what we should do.

So enjoyed the build.

obnoxious music. no purpose at all

I feel for you! Very sad. I have 3 Jumbo Peking ducks and two got attacked by something. Looked like yours thinking Coyote couldn't see it was too dark when I ran outside hearing noise. I brought one to vet and of course they didn't expect a duck. But none the less there was an assistant avian guy who was learning available and he said slap some manuka honey on it. They clipped the feathers around wound for me and stitched it up a little to help the healing process but they said its important to leave it open and apply the honey. You guys did such a great job!