Perth Art Glass

Пікірлер

@klof21st20 28 күн бұрын

you say it's impossible to cut 90 degree angles but what about cutting it while submerged underwater? do you have videos of that? How do you cut glass bottles?

@perthartglass 28 күн бұрын

Perhaps we should say 'impossible by hand'. There are tools such as diamond blade ring saws, band saws and water jet machines that can be used to make intricate cuts. To cut bottles there are a few tools on the market. You can make a score line around the bottle and then submerge the bottle in hot and cold water baths to complete the break. We don't have a video about this at them moment.

@francesharper9997 Ай бұрын

Wow, you have amazing skill! Thank you for your advice!

@benniehumephotography 2 ай бұрын

Thank you for going through all the steps. Very nice. What is the putty that you are using??

@perthartglass 2 ай бұрын

Thank you. We use the Conway brand Linseed Oil Putty in black.

@benniehumephotography 2 ай бұрын

@@perthartglass Thank you very much for the reply! now to see if I can find it!

@57door 3 ай бұрын

Onto my third piece of glass ... :)

@perthartglass 2 ай бұрын

😟It's like that sometimes!

@airammunarace2817 4 ай бұрын

Nice cut. Where to avail that glass cutter? Thanks

@perthartglass 4 ай бұрын

Hi, we sell them in our shop perthartglass.com.au/product/cutters-silberschnitt-circle-cutter/

@enviosinterdimencionales8612 Ай бұрын

china.

@jd.coleman 4 ай бұрын

What type of wood is the base you are working on? Or is it wood? Thank you!

@perthartglass 4 ай бұрын

That's just chipboard that Bree's using but any wood would be fine.

@backyardbque1964 4 ай бұрын

what is the smallest circle you can cut with that cutter?

@perthartglass 4 ай бұрын

This cutter can cut circles from 3/8″ to 5″ in diameter.

@cannabisanomaly 5 ай бұрын

if your new tips come pre-tinned, is there a need to tin it prior to its first use?

@perthartglass 4 ай бұрын

Even if it says pre-tinned we would still recommend you follow this process. We have found that without tinning them on the first heat-up, the tips corrode.

@user-mx5xq5mw9z 5 ай бұрын

I always start with just the tip.

@Growler57 4 ай бұрын

Now get to bed no supper for you dirty boy

@koningklootzak7788 4 ай бұрын

That's what she wants

@bernzespinoza 5 ай бұрын

I learned this in electronic class in Jr high school

@JOmz8801 5 ай бұрын

Could you please give me some advice. Im new to soldering and i bought a new very inexpensive solder iron and also bought some 63/37tin/lead 2% rosin core solder. No store near me sells tinning flux or regular flux. So can i tin it with what i have?

@realjighead4282 5 ай бұрын

Yes, you can use what you have. The rosin is flux

@tmymcy7292 5 ай бұрын

I was looking for a video to cut a circle within a circle but you gave me an idea ... I'll try it... if I remember I'll let ya know how I did 😁

@carlodelmundo1 Ай бұрын

how did it go? I have to do something similar with a deck table

@r.t.elangovanr.t.elangovan6792 5 ай бұрын

A close up view can give an accurate view of the cutting edge contour of the tip to enable better understanding. Thank you for your demonstrations sir.

@philnorris9179 6 ай бұрын

i've seen other vids where people wind some solder around the tip then turn the iron on. would this be the same principle?... great vid btw...

@perthartglass 5 ай бұрын

Yes, it's just about covering the tip as it heats up so that would work too.

@glasshalffull2930 6 ай бұрын

Nice video! Perhaps adjust the camera angle up a bit so viewers can see you cutting the came.

@perthartglass 5 ай бұрын

Thanks for the tips.

@user-pg3sg6tg4h 6 ай бұрын

how do i cut a crescent moon? thanks

@bertraminc9412 7 ай бұрын

Wonderful. Thank you. Cheers.

@erinflores7160 7 ай бұрын

'Promo sm'

@user-mw3he8qo1q 7 ай бұрын

Cut difficult Shapes but Without Hand Gloves. Impossible cut, cut your hand possible.

@user-ts7pd8ff1c 7 ай бұрын

❤

@olheghtt 7 ай бұрын

... Seems to me that the first time you use the soldering gun it's going to tin itself

@perthartglass 7 ай бұрын

Hi, If the soldering iron gets to full temperature before you have tinned the tip, it will oxidize and won't accept the solder. This is why this process is so important.

@olheghtt 7 ай бұрын

@@perthartglass okay, I'm thinking back just a few weeks ago I bought a new Weller 260/200 watt. The first time I used it I was holding solder up to the tip waiting for it to become hot enough to use. I guess without even meaning to I tinned the tip...😁

@perthartglass 7 ай бұрын

@@olheghtt Lucky! Glad it worked out for you :)

@NarrowboatJourneys 8 ай бұрын

Is it true that it's very hard to cut old or weathered glass?

@perthartglass 7 ай бұрын

Yes and no. The 'cuttability' of glass is dependent on the manufacturing process but processes that were used in the past are more likely to produce brittle glass which is why it may seem like it's due to age.

@susanevanoff5530 8 ай бұрын

Just purchased this grinder. Your demonstration was most helpful. Thank you!

@electroboy3607 8 ай бұрын

☺☺☺

@user-fy5sz8ps2d 8 ай бұрын

how about to cut a double side window glass ? you cannot touch the other side.

@perthartglass 8 ай бұрын

It's not recommended to cut glass while installed using this technique.

@karenmcintyre4366 9 ай бұрын

Beautiful work!

@col5017 9 ай бұрын

Luverly Jubbly 🙌

@Beemerboy324 10 ай бұрын

Sounds like an Aussie. We don't pronounce the "l". We say SAH der. Good point, though. Tin the tip.

@kerPlanck 6 ай бұрын

Who cares? Solder is solder.

@lioneloconnor4785 11 ай бұрын

Wtf happened there Bruce? 4:08

@perthartglass 11 ай бұрын

Haha, you noticed! There was a breakage on the first attempt.

@djfromage 10 ай бұрын

There's a breakage on every attempt I've done so far. Not with your technique though, I'll try that and see what happens..

@user-youzer 11 ай бұрын

Okay! And now show how this work on 8mm glass. On 3mm it can do even monkey.

@Zay98663 11 ай бұрын

“Yo daddy wasn’t a glass maker move from in from of the tv”……….Oh wait never mind😅

@afsaltalanallur Жыл бұрын

kzfaq.info2waOd9sWf5g?feature=share 5mm glass round cutting

@ColoradoDreamin Жыл бұрын

I’m glad I came across this! Crazy so many beginner vids don’t tell you this!

@anthonyellsmore4532 Жыл бұрын

I tried carefully and gradually wait...but I didn't wait carefully enough 😅 just fucking with ya ...i Had no idea you have to do that...thanks

@Nazuiko Жыл бұрын

What if you wanted to remove a circle from the glass, without moving the glass panel? could you do that

@perthartglass Жыл бұрын

If you mean from a window still in its frame, then no, that is not recommended. You will not be able to apply the pressure needed.

@Analstrosen Жыл бұрын

@@perthartglass is there a circle cutter that instead of scores, cuts/grinds all the way through?

@perthartglass 11 ай бұрын

@@Analstrosen Tools such as bandsaws and drills work on glass if they have a diamond blade or bit and the cut is kept wet through the process.

@Analstrosen 11 ай бұрын

@@perthartglass I know of diamond blades/tips but the compass thing, is there a blade that can cut deeper than other ones?

@perthartglass 11 ай бұрын

@@Analstrosen No, glass cutters are just scoring the glass.

@cchemmes-seeseeart3948 Жыл бұрын

Thanks for the video. I have 2 questions. 1. What type of solder should you use if you are soldering with a lead free solder (with nickel, etc) that is challenging to solder with? (I've heard you should use 63/37 tin lead, for a high lead content, & the instant melt it gives). Would you agree? 2. I've seen so many different methods, it has left me wondering what is right. There are some who make it sound you should have the tip completely covered before even turning it on the first time, using "tinning flux" that has tin in it, and completely wrapping the tip in solder. Does that matter?

@perthartglass 10 ай бұрын

You can tin your tip with the leadfree solder. We use and sell aquasafe which is mostly tin and it is harder to solder with. We recommend the method we've used in the video but if you try different methods you may find a different one suits you better.

@Elvisrivers1 Жыл бұрын

How do you cut the corners off a squared edge?

@thegratefulsteve Жыл бұрын

How would one cut out a middle section of glass? like the hole of a donut.

@perthartglass Жыл бұрын

Check out this video kzfaq.info/get/bejne/j6uYeJSByse9caM.html

@gumbystrikes Жыл бұрын

Thank you for the great video. What is the lubricant you use.

@perthartglass Жыл бұрын

It is a water-soluble glass cutting fluid that we sell. perthartglass.com.au/product/ch50056/

@lioneloconnor4785 11 ай бұрын

I've used wd40 and it cuts fine for me! or turpentine/kerosene. Very thin oil. It's not a nuclear bomb you're working on!!💥

@theresevarney4715 Жыл бұрын

I wish you would give us more time to read the instructions and show close ups so we can see what you are doing. You are an amazing artist! Your work is beautiful! Big fan from Washington State, 🇺🇸 😃🌲🦀

@perthartglass Жыл бұрын

Hi, Thanks for the feedback. I'll keep it in mind for our future videos.

@theresevarney4715 Жыл бұрын

How do you incorporate the oil into your cutting?

@theresevarney4715 Жыл бұрын

Beautiful 😊 Thank you!

@nathan6584 Жыл бұрын

Wonderful tutorial, succinct and practical. Thank you!

@jeffbarron5500 Жыл бұрын

Those casts in the background are pretty bad, lol. should of kept them hidden .

@Rottingboards Жыл бұрын

Wow...just wow.

@stevenbeebe35 Жыл бұрын

Weller Soldering Irons SUCK!!! They are the worst CRAP on the market, DO NOT BUY THEM.

@kkaranja1939 Жыл бұрын

Thank you very much

@alexabmo6658 Жыл бұрын

Is it possible to cut a tile the same way?

@perthartglass Жыл бұрын

With the same technique, yes, but you might need a different type of cutter.

@JoeyArispe Жыл бұрын

just what i need!! Thank you

@sarachitamang6840 Жыл бұрын

Sir can you export thet tools to other country? please sir

@perthartglass Жыл бұрын

Hi Sarachi, Unfortunately we are currently out of stock at the moment but usually you can purchase the cutter here perthartglass.com.au/product/tlens-easy-cut-lens-cutter/.

Ең жақсы KZfaq

Пікірлер