Circles Demonstration - How do I cut circles and holes in glass?

Рет қаралды 18,432

3 жыл бұрын

In this video Ian takes the viewer through a variety of methods to cut circles in glass. He demonstrates the use of a circle cutter and a lens cutter in creating perfect circles.
He also demonstrates the cutting of a hole.
Products available at Perth Art Glass
Circle Cutter - perthartglass.com.au/product/...
Lens Cutter - perthartglass.com.au/product/...
Pen Style Cutter - perthartglass.com.au/product/...

Пікірлер: 36

@57door 3 ай бұрын

Onto my third piece of glass ... :)

@perthartglass 2 ай бұрын

😟It's like that sometimes!

@roythompson6137 2 жыл бұрын

Bloody brilliant!

@tmymcy7292 5 ай бұрын

I was looking for a video to cut a circle within a circle but you gave me an idea ... I'll try it... if I remember I'll let ya know how I did 😁

@carlodelmundo1 26 күн бұрын

how did it go? I have to do something similar with a deck table

@kkaranja1939 Жыл бұрын

Thank you very much

@robtherub Жыл бұрын

Thanxxx

@gumbystrikes Жыл бұрын

Thank you for the great video. What is the lubricant you use.

@perthartglass Жыл бұрын

It is a water-soluble glass cutting fluid that we sell. perthartglass.com.au/product/ch50056/

@lioneloconnor4785 11 ай бұрын

I've used wd40 and it cuts fine for me! or turpentine/kerosene. Very thin oil. It's not a nuclear bomb you're working on!!💥

@airammunarace2817 4 ай бұрын

Nice cut. Where to avail that glass cutter? Thanks

@perthartglass 4 ай бұрын

Hi, we sell them in our shop perthartglass.com.au/product/cutters-silberschnitt-circle-cutter/

@enviosinterdimencionales8612 Ай бұрын

china.

@neilrisley6667 2 жыл бұрын

Can a 50mm circle be cut (using the circular cutter) while the glass is still vertical?

@perthartglass 2 жыл бұрын

No, the minimum diameter the circle cutter can cut is approximately 80mm. You could cut the 80mm circle vertically using this technique.

@user-pg3sg6tg4h 6 ай бұрын

how do i cut a crescent moon? thanks

@NarrowboatJourneys 7 ай бұрын

Is it true that it's very hard to cut old or weathered glass?

@perthartglass 7 ай бұрын

Yes and no. The 'cuttability' of glass is dependent on the manufacturing process but processes that were used in the past are more likely to produce brittle glass which is why it may seem like it's due to age.

@Zay98663 11 ай бұрын

“Yo daddy wasn’t a glass maker move from in from of the tv”……….Oh wait never mind😅

@alexabmo6658 Жыл бұрын

Is it possible to cut a tile the same way?

@perthartglass Жыл бұрын

With the same technique, yes, but you might need a different type of cutter.

@Nazuiko Жыл бұрын

What if you wanted to remove a circle from the glass, without moving the glass panel? could you do that

@perthartglass Жыл бұрын

If you mean from a window still in its frame, then no, that is not recommended. You will not be able to apply the pressure needed.

@Analstrosen 11 ай бұрын

@@perthartglass is there a circle cutter that instead of scores, cuts/grinds all the way through?

@perthartglass 11 ай бұрын

@@Analstrosen Tools such as bandsaws and drills work on glass if they have a diamond blade or bit and the cut is kept wet through the process.

@Analstrosen 11 ай бұрын

@@perthartglass I know of diamond blades/tips but the compass thing, is there a blade that can cut deeper than other ones?

@perthartglass 11 ай бұрын

@@Analstrosen No, glass cutters are just scoring the glass.

@user-fy5sz8ps2d 8 ай бұрын

how about to cut a double side window glass ? you cannot touch the other side.

@perthartglass 8 ай бұрын

It's not recommended to cut glass while installed using this technique.

@sarachitamang6840 2 жыл бұрын

Sir how much price? Please!

@perthartglass 2 жыл бұрын

Links to the products used in this demo are in the video description.

@user-youzer 11 ай бұрын

Okay! And now show how this work on 8mm glass. On 3mm it can do even monkey.

@lioneloconnor4785 11 ай бұрын

Wtf happened there Bruce? 4:08

@perthartglass 10 ай бұрын

Haha, you noticed! There was a breakage on the first attempt.

@djfromage 10 ай бұрын

There's a breakage on every attempt I've done so far. Not with your technique though, I'll try that and see what happens..