A dirty windshield, driving into the Sun, the only thing that's missing is a six pack

Correct mixture is 50:1

I must have blinked but I didn’t see anything worth seeing.

The fuck was The point of this video

Nice and simple video. Thanks 👍👍👍👍👍👍

What is the ac delco part number for this?

DON'T NEED THE PUMP, NEED THE MOTER,

pump is not on the washer reservoir, worked a short time when pluged in, where is the MOTER???????? vvior, wo

I used to live in Cortez... I remember this drive, brings back memories ❤

800 far superior vehicle

Cuál es el precio de ese tablero ya con la base

Esta re dea esa camioneta ami no me gusta esa mierda

I have the same exact problem but on an 01 dodge ram 1500, would it be the same fuse?

It's a second generation ram. 94 to 01 I think.

Thank you for your I was trying to replace a heater core and could not find the two bolts that were behind the electronic box on the left of the air conditioner

Excellent video showing a guy working well without all the usual ADHD/ego/redneck crap. I would employ you in a heartbeat! Good seeing someone taking care with things, like the way you carefully placed that computer down. And using handtools instead of impact drivers etc which round screw heads off. What model heater core did you use? Rockauto lists 9 different models.

That s true brother someone at GM needs to take behind tje wood shed 🏚& kick !@#€%^/ i remember ole we just change the hole headlight / thanks video brother 🤘✌️👍

Awesome Video...No BullShit just straight to the point...Nice Job.

2003 dodge ram 1500 have this issue checked the fuses o. The engine where would the inside fuse be??

That is ridiculous! Thanks for the video

you posted this 8 years ago and it helped me out today, buddy needed help starting the jawnt did everything you did three pull mf was running

0:54

Not impressed! first of all, should have removed the connector and tucked it out of the way, secondly should have thoroughly cleaned around the modulator opening on the transmission before removing the modulator so that no specs of debris could get inside.

0:00 fire alarms go off 0:25 The End

When I viewed your Ganada to Chambers AZ Virtual Drive... I immediately said... "That Looks Whole Lot Like the Drive From Snowflake to Holbrook AZ."... Then I looked at a Map and Understood WHY! Blessings*SharonZ WA Staff Sgt USAF SAC Ist CEG Det 2 Radar Site Attached to Luke AFB Glendale AZ 1967-1971

I really enjoyed this contribution to my travel down memory lane! Thank you. Blessings*SharonZ Support: Luke Air Force Base Built Radar Detachment in Holbrook, 1960's Support Training/Evaluation for B-52 Flight Crews headed to SE Asia. up on the hill north of downtown on Route 66, Holbrook AZ After being Honorably Discharged I returned to WA Even so, I also return to AZ every so often for... * Winter Getaway. * Fishing the Rim * Skiing Sunrise, Snow*Bowl & Mt Lemon's, Ski*Valley 🤪💞👍--🏂🚴‍♀🏌--🌶🌮🥗

Coocoo

Is it diesel

all that spillage on the undercarriage is just weatherproofing!

Thank you! My saw hasn’t had a lot of use and is relatively new but sat with gas for about 5 years and wouldn’t start. I thought I was going to have to pull and clean the carb which intimidated me having never done that. Added fresh fuel and a bit to the cylinder and after about 5 pulls with the choke it fired up and is running well.

I have spectralert advances, and Wheelock As's (Rebranded as Siemens) at my work. Knowing how loud both of those are, I'm going to have fun when a Fire drill or a false alarm happens!

Worst how to video. Looked like you were in a race to do this.

Well made video, thanks

DO YOU SEE MY HOUSE???

sounds normal used engine

you need to talk

The last time I saw Crownpoint was in 1979, I lived there from 1971 to 1974, the year I graduated from Crownpoint Hight School, have many fond memories of that town. Thank you for sharing this drive.

Everywhere else says you have to take off the entire dash I'm really not wanting to do all that and was hoping I can go through the glove box

How do you manage to move the venting to get the heater core in??

How the heck do you get that one screw out on the heater core tubes right next to the firewall? I can’t get mine out.

Thats for the whole assembly not just the bulb.

Just did this. Low beam lights both sides. Everything was pretty straightforward but it is not for a beginner mechanic... you need a bit of confidence. Drivers side; remove fuse box cover (I didnt have to remove the entire fuse box compartment, just the cover) NOTE: my new headlights came with the O-Ring already so be sure to remove the other O-Ring from the burnt out bulb or you will never get the light to turn in! Passenger side; There are 3 torque screws to remove the Air Filter assembly, and it definitely helps to remove the upper rubber intake foot to access the third torque screw. NOTE: Removing the plastic siding really helped with the removal of the Air Filter assembly... I could not get the filter out without removing the plastic siding... Good luck... and I cant believe you have to go through all of this just to remove a headlight bulb

Driving to fast

I need to get that bypass pipe out, rusted got a pinole, how the hell am I gonna get that out, or in?

Thanks, real good video! 👍🏿

I did this and it took 3 weeks of pure frustration and anger. Instead of sending people to prison they should be made to do a few of these.

Good Job, Thank you. But you took apart much that wasn't needed. Also didn't show how you cleared the metal heater core lines out of the firewall holes; as the camera angle needed to be either above, straight on, or to left of where H.Core lines going thru firewall.

Wonderful Video!!!!! F+L, Corey

Thanks for the video, helped me a lot. Why wouldn't you clean that mf while you have it apart? To each his own i guess 🤷.

It's like you have two left hands.