Do you know why when I put it in drive it says it’s in 3rd

R/H Thread thankyou for that😀

I was having trouble with my cluster,gas,tem, odometer wasn't working and battery light was on permanently,I figured the solution for my issue,it was the cruise control fuse inside the cab driver side. I hope this help some one,I did spend lot's hours trying to figure out the problem.

Thank you, mine was just the resistors like yours!

Had some meth head try to steal my 89 xlt lariat. Caught the pos in the act then decided to chase after him wearing flip flops. Was about 7am 😂

My new steering column does not have the part sticking out but the old one does. It's the exact same column but for some reason does not have that slack???

I have a 91 f350 dually with the old 7.3 idi. Everything was exactly the same just had alot less room under the hood.

What’s The tool names that you used to fix the cluster or could you put a link?

I got an 05 2.5 myself but it’s just sitting due to being unregistered. If the battery was any good I’d start it today when it was -10

Add anal lube to the planetary gears

bruh the camera man is the worse,

Could a guy just replace the entire cluster ?

Thanks just fixed mine. It was also the power resistors on mine too.

Trying to remove a key lock cylinder from an 88 Ford F150 but the little screw holding it in has been drilled but not removed.. what can I do?

Are all wiring harnesses set up for cruise control?

I am ordering a rebuilt column for my 1990 and will forge ahead. You really helped this amature 74 year old who has been repairing my own vehiles for 55 years. Looks staright forward and than you for this video.

Would it be higher on driver side to compensate the driver’s weight? Where did you get this kit? I need raise mine too,

Anybody got ideas on why the ODO would stay on even after truck is off?

Thank you worked like a charm I used to have a yamaha that had a display for the fuel gauge every once in a while I would have to do the same thing to it

What happens if you don't unplug the battery

Still would like to know what to do under the hood

If youre near Oregon Ill give you $ to either fix my odo or walk me thru it?

After years of "Love tapping" the dash on my 2000 to get the odometer on, it is finally fixed. Thank you Sir!

I did the exact same procedure and my odometer came back full bright! Thank you sir!

Had the same with a expedition

Mine works somedays I can tap it and sometimes that makes it come back on. Then fades again

Reminiscing about this today and found the video...I *think* this beast was the first thing I ever drove bigger than a quad. Thank you all for getting me into wrenching and giving me a fascination for driving on dirt!

i love the 2.5

I had the same iwiring issue on a 4th generation 2004 4runner on the passenger door. Locks and windows didn't work. Checked power on the lock and window switches in the door and found no power. So after finding this on KZfaq I checked the harness in the boot and found a similar issue. Many thanks

You can remove the tap and use a big nut over the guide and tread a bolt and nut into the guide and then tighten the nut to pull the guide out

What size engine hoist did y’all use? I’m trying to figure out if I can get away with using a one ton hoist, I already have the front end torn down to the core support so I should be able to sneak it in nice and close I reckon

How is it holding up after 5years? Any sagging?

about to do the same to my 88 steering wheel lose af

this has to be one of the best videos i have seen, awesome job

Thanks for the video

Ford built those 8th gen F-series pickups & 4th gen Broncos from 1987 through 1991.

Thank you sir this is dope. Just what u needed. Have an 86 that I'm swapping out. I'm thinking this will work for me too. I read 80-92 steering column is compatible.

Thanks for posting bro!!

Thankyou very much from Vancouver Canada

Excellent

No fender rubbing front or rear or even when turning front wheels?

This saved me. Had the same problem and checked what you found and sure enough I had several wires broken. Fixed those and windows back to working. Good catch and thank you for posting what you found!

It worked for me pops !!!!

Jeep springs for a FOUR INCH LIFT posted on my channel

Nice old 72 sled

Yall talking wasnt bad talking it was discussion on the motor n yall process. Good video. What size hoist is that. I have a 3 ton but my lift height isnt no where near that I have to take off the front clip also cuz i dont have the fan tool.

How NOT to remove a 7.3 diesel ! Do it right and save a lot of headaches

kzfaq.info/get/bejne/pdt8adaincDRoJc.html Check video @ 23:15 for water leak

The driver side water leak is mentioned @ 23:15 kzfaq.info/get/bejne/pdt8adaincDRoJc.html

There is a grommet hole on the firewall drivers side seal it with expanding foam and no more leaks, I chased that leak for a year.