please consider to make a project from nrf24l01 module
@SasteJugaad2 күн бұрын
In future sure
@ninjalemon_Squash2 күн бұрын
Quiet early, looks cute.
@SasteJugaad2 күн бұрын
Thabks
@supdarlintakemeoutyodinner10332 күн бұрын
cool
@SasteJugaad2 күн бұрын
Thanks
@mandish19532 күн бұрын
Hi
@SasteJugaad2 күн бұрын
hello
@IE_ROYK4 күн бұрын
Bro aasync.udp library dedo
@astro_kozuki5 күн бұрын
Bro any circuit diagram 😔
@SasteJugaad2 күн бұрын
I didn't write any new program for this. I used one of my old project.
@astro_kozuki5 күн бұрын
How can I make it an obstacle avoid
@SasteJugaad2 күн бұрын
You will need to add ultrasonic sensor or a laser obstacle sensor
@Jesskhilal13 күн бұрын
Do I can make it with arduino nano
@SasteJugaad11 күн бұрын
No you need esp32 because code uses freertos
@hypnoticatrance13 күн бұрын
why it need a cooler!
@SasteJugaad11 күн бұрын
It was for future expansion. I was planning to add rpi and camera
@videointerestiing3114 күн бұрын
Nu merge să pun codul pe placă 😢😢
@SasteJugaad2 күн бұрын
I didn't understand 😅
@johni308017 күн бұрын
This is actually helpful!, can you tell me how you did it? Did you use gazebo_ros_force plugin? I tried using it but it can’t apply force for duration, only constant force. I want to simulate impact.
@SasteJugaad2 күн бұрын
I don't remember 😁
@Harshit-mg3hj19 күн бұрын
Hi how much this drone cost
@SasteJugaad18 күн бұрын
Project banao phale
@Harshit-mg3hj16 күн бұрын
Ok 😅 bhaiya
@6699XDD22 күн бұрын
i tried to compile the code but it showing"Compilation error: AsyncUDP.h: No such file or directory".i have installed the library then also its showing the error .could you plz help me.
@SasteJugaad2 күн бұрын
Please share the screenshot of error in discord
@ADTECHANDELECTRONICS23 күн бұрын
Bhaiya ye aap mil nehi raha.... bahut accha project hai
@SasteJugaad22 күн бұрын
This is very old project. Check my channel I have made many other small rovers also try them.
@ADTECHANDELECTRONICS22 күн бұрын
@@SasteJugaad thank you sir, I will make other projects with your excellent videos 😁😁
@mukhos248124 күн бұрын
I have done this same project with arduino uno... So i need to connet a cable to my laptop.. but i want to make it wireless communication. How do i do that?
@SasteJugaad22 күн бұрын
Switch to esp32 like I have shown. This is the 2nd video of FREEBOT there are 4 start from part 1 you will understand what to do
@Master_the_cut25 күн бұрын
hi did you use c# script in this
@SasteJugaad24 күн бұрын
C sharp yes
@GusVegaFantasmaАй бұрын
Please add some sensors to this!
@SasteJugaadАй бұрын
I am planning for better motors
@GusVegaFantasma29 күн бұрын
@@SasteJugaad I'm planning on modify a toy rc car, it uses common motors with gnd and vcc, I was planning to disassemble the servo and use the electronic board connected directly, but notice that there is a potentiometer that measures the position, is this part necessary? Or there is a way I can control the motors without any data wire?
@AkshaySharma-wn4bdАй бұрын
its not opening the other 2 header files along with the code,, I installed the esp32 library and added the board link in additional board
@SasteJugaadАй бұрын
Instead of double clicking the code one thr fike manually fron arduino ide by going to file option or instead of opening main code open one of the header files. This is related to your system permissions. You can also try running arduino in administrator mode.
@gourabkar5565Ай бұрын
Code please 🙏
@SasteJugaadАй бұрын
I have already made full tutorial om this kzfaq.info/get/bejne/ZpiIoshzkq2Vco0.html
@ajgamershorts9619Ай бұрын
phale bar hi ek ytber ko esp 32/nod mcu use kar raha hae na hi ftdi adaptor i also use esp 32 for code upload
@SasteJugaad2 күн бұрын
Good keep learning 👍
@dhirajdhingra-je6gjАй бұрын
maine banaya bahut acha hai
@SasteJugaadАй бұрын
Discord par share karo hum bhi dekehn 👍
@mr.strange8519Ай бұрын
Sir this is a very awesome project. I was trying to make one for some time now and i am stuck pls help me .
@SasteJugaadАй бұрын
I am working on tutorial but it will take some time.
@ajgamershorts9619Ай бұрын
isko kisi projcet me kase use kar ye ge
@SasteJugaadАй бұрын
You can export the trained model and use in any project you want.
@ajgamershorts9619Ай бұрын
isko hum log kaha use kar skte hye like on esp 32 cam ???
@SasteJugaad2 күн бұрын
You can train and export model to use in other projects like raspberry pi
@Mr._Pink_Hair058Ай бұрын
arduino me AsyncUDP LIBRARY MHI HA HA PROBLEM PLEASE SOLVE
@SasteJugaadАй бұрын
You need to install it. Search for asyncUdp.h in Google you will get it
@Mr._Pink_Hair058Ай бұрын
@@SasteJugaad but i have a problem i want to make 2WD robot
@SasteJugaadАй бұрын
@@Mr._Pink_Hair058 problem kya hai?
@Mr._Pink_Hair05828 күн бұрын
@@SasteJugaad with esp8266
@GusVegaFantasmaАй бұрын
Been looking for a project like this a long time, have no idea where to start! Is there any chance you make a version with omniwheels?
@SasteJugaadАй бұрын
Thanks I have already made one using mecanum wheels kzfaq.info/get/bejne/ZpiIoshzkq2Vco0.htmlsi=fqfg4MJ_DKMbONi_
@GusVegaFantasmaАй бұрын
@@SasteJugaad thanks a lot!
@Anubhav_ProjectsАй бұрын
Heeettt sala ek ka bna diya re. 😅😅😅😂
@SasteJugaadАй бұрын
Kaisa laga
@Anubhav_ProjectsАй бұрын
@@SasteJugaad jhakaas
@Harshit-mg3hjАй бұрын
Hi Bhaiya
@Harshit-mg3hjАй бұрын
Bhaiya jab speed vali jumper lagate hai jab aak motor nahi chal rahi with speed control ka do o chal rahi hai
@Harshit-mg3hjАй бұрын
Please help 😢
@SasteJugaadАй бұрын
Share in discord I will help
@SasteJugaadАй бұрын
Hello
@rishurajesh2612Ай бұрын
is the sensor "VL53L0XV2" the one you get for less than 200 in robu or "VL53L1X" ??
@myshticaanimo2169Ай бұрын
Just found new teacher on KZfaq 😇
@SasteJugaadАй бұрын
😁👍
@myshticaanimo2169Ай бұрын
Good
@SasteJugaadАй бұрын
Thanks
@himanshubotics5312Ай бұрын
Heyyy do you need a video editor!!!
@SasteJugaad2 күн бұрын
I need time to finish my projects 😂
@vedu15052 ай бұрын
🎉
@SasteJugaadАй бұрын
😁😁
@SasteJugaadАй бұрын
🙂
@vedu1505Ай бұрын
@@SasteJugaadplease make brushed Ardiuno Bluetooth drone with full tutorial.
@nguyenminhtam58732 ай бұрын
Wonderful, I love U
@SasteJugaad2 ай бұрын
😊
@munnaupadhyay70582 ай бұрын
@SasteJugaad code is giving error it is saying that analogWrite is not defined in this scope pls help
@SasteJugaad2 ай бұрын
Which version of arduino Ide are you using? Use 1.8 like me
@munnaupadhyay70582 ай бұрын
Yes
@mr.lucifer12162 ай бұрын
Hii Bhaiya Plzz ek pvc rocket bnaiye🙏🏻🙏🏻
@SasteJugaad2 ай бұрын
Man to bahut hai but I don't have access to empty space to test and launch
@Mincrafter_Raza2 ай бұрын
Sir i made an node mcu bot using L289n motor driver can it work with it
@SasteJugaad2 ай бұрын
Yes it can just replace the commands being sent to your robot format. This project does not depend upon your robot. It will work with anything
@ninjalemon_Squash2 ай бұрын
Lol.
@SasteJugaad2 ай бұрын
🙂
@scaledzone23832 ай бұрын
2nd comment and please upload a tutorial of this
@SasteJugaad2 ай бұрын
Abhi time hai usmai. Lots of refinement to do
@z___a___m2 ай бұрын
Bhai jo iss vedio me apne laptop use kiya hei ye konsa laptop hai
@SasteJugaad2 ай бұрын
Phale project bana k dikaho fir bata oonga
@pzk1432 ай бұрын
First view , First like and First comment 💖
@SasteJugaad2 ай бұрын
Thank you frnd 😁
@amlong76332 ай бұрын
Where is ground of the oled led to? Is it the ground of the driver or the ground of the esp32? Please answer me!
@SasteJugaad2 ай бұрын
Yes connect to ground of esp32
@amlong76332 ай бұрын
@@SasteJugaad then what is connecting to the right-side ground of the driver module? Is it the negative out of the stepper?
@SasteJugaad2 ай бұрын
@@amlong7633 I dont understand please share the pictures on discord group so I can understand and help
@munnaupadhyay70582 ай бұрын
@SasteJugaad Can we use MacBook for Coding
@SasteJugaad2 ай бұрын
Yes you can
@munnaupadhyay70582 ай бұрын
@SasteJugaad Can we use plywood instead of foamboard 2:13
@SasteJugaad2 ай бұрын
Yes you can
@rishabh19719882 ай бұрын
Its very good for summer camp activity also
@SasteJugaad2 ай бұрын
Thanks
@rishabh19719882 ай бұрын
Very good project for school kids sir, thanks
@SasteJugaad2 ай бұрын
Thanks
@munnaupadhyay70582 ай бұрын
Kanpur
@SasteJugaad2 ай бұрын
Badiya
@brocode7492 ай бұрын
As an ExTC 4th year student what change can be made more in freebot
@SasteJugaad2 ай бұрын
You can run machine learning model to detect objects or make it follow people.