Eufy Giveaway
3:34
21 күн бұрын
Пікірлер
@robp.1480
@robp.1480 Сағат бұрын
The new Ruko R111 is just a tiny bit smaller and about $30 cheaper then the Holy Stone.
@anthonyquerrieo7487
@anthonyquerrieo7487 13 сағат бұрын
Ya that ain’t diy my guy lol you cheated
@markcrowther2355
@markcrowther2355 13 сағат бұрын
Hi, I'm confused why you would need a battery when its a wired model? On the website, the wired unit without a battery seems to me that it won't use the existing chime? Very confusing....The wired model shows some chime that plugs in an outlet... I'm I missing something? Also how many users can use the app? thx
@DoItYourselfDad
@DoItYourselfDad 10 сағат бұрын
The wired (non battery model) bypasses the chime in your house and pulls power from the doorbell transformer. With the battery version it trickle charges off the doorbell transformer and allows you to use your existing chime.
@DoItYourselfDad
@DoItYourselfDad 10 сағат бұрын
Oh…. You can use the same login with as many users/devices as you need. You can also setup multiple accounts and share your devices to other accounts if you want to be able to limit what the other users can do/change with your devices.
@janett3390
@janett3390 19 сағат бұрын
Thank you.
@greatcesarsghost
@greatcesarsghost Күн бұрын
My car has a 800 watt inverter can I charge the unit that way ..
@DoItYourselfDad
@DoItYourselfDad 9 сағат бұрын
Yes, you could. Be sure to check in the app that it’s set to pull under 800w while charging.
@robertcallahansr.1382
@robertcallahansr.1382 Күн бұрын
Dude, it's egg in a basket
@domo8676
@domo8676 Күн бұрын
Hilarious! ~$300+ for a gizmo that measure Cl and pH - oh, yeah and tells you the temperature. LOL. As PT Barnum says - a sucker is born every minute.
@josephzao6737
@josephzao6737 Күн бұрын
I have Eufy E340 and Eufy S340 (2 of Each). I replaced some PTZ cameras from several years ago that had blistered in the sunlight under high temperatures. The video that you have presented is excellent. Eventually, I intend to get the hard drive station to record with a hard drive and connect to my router. I agree that you explained the two cameras' characteristics, advantages, and similarities. The installation process was straightforward; comparatively, too many items that I have purchased in the past sometimes don’t have clear instructions. The application that goes with the program is marvelous and very easy to work with. I installed these cameras about 30 days ago and saw this video on KZfaq. You did a great job, and I wish you the best in explaining some of these items to homeowners and families concerned about the day-to-day observations needed in almost any neighborhood. Well presented. Good luck. (I used Grammarly AI to clean up the writing - a Berkeley Haas tool)
@rgray318
@rgray318 Күн бұрын
Do you need the HomeBase with eight S340 cameras?
@DoItYourselfDad
@DoItYourselfDad 9 сағат бұрын
No, you can also connect via Wi-Fi.
@westinspace9286
@westinspace9286 Күн бұрын
For another $20 you could get an Ender 3, for that reason I think this printer is more of a novelty machine than an actual 3d printer. It would be a great gift though for someone who likes to tinker with things.
@luiscruz7141
@luiscruz7141 Күн бұрын
Very good job. Awesome video
@beckydayedgar1764
@beckydayedgar1764 Күн бұрын
You should be install headlight for Atv please ok
@7gpanda744
@7gpanda744 2 күн бұрын
No internet.... no cameras... simple hack for thieves. I realized that but too late... I already have so many outdoor cameras... GOSH!!!!!!!
@DoItYourselfDad
@DoItYourselfDad Күн бұрын
With the base station it will still record with, or without internet.
@roviemiguel440
@roviemiguel440 2 күн бұрын
Hey, does this wire have electricity?
@DoItYourselfDad
@DoItYourselfDad Күн бұрын
Sprinklers are low voltage wiring.
@JohnSmith-zo8du
@JohnSmith-zo8du 2 күн бұрын
it is a good solution for motorcycles
@Mark_White918
@Mark_White918 2 күн бұрын
Carpuride W702B has a special bracket for BMW motorcycles ,nice
@razorsharp170
@razorsharp170 2 күн бұрын
Minor tip. Wype the inside of the lid down with peteolium jelly before filling with foam. It wont stick after it dries.
@harryhoesch3793
@harryhoesch3793 2 күн бұрын
Always wondered why no one came out with a cover with white on one side and black on the other.. You answered that. Thanks
@joeprovenzano4362
@joeprovenzano4362 2 күн бұрын
I absolutely believe this will work. But what do I use with a 7500 gal pond?
@DoItYourselfDad
@DoItYourselfDad Күн бұрын
I’d look for the taller 10 gallon food grade buckets.
@biglon74
@biglon74 3 күн бұрын
One thing you should pass on WILL NOT WORK WITH SALT WATER POOLS,,Bummer!!!
@DoItYourselfDad
@DoItYourselfDad Күн бұрын
They have probes that work in salt pools as well. After this video (last summer) we built a salt pool and have had a salt probe in there since last August.
@biglon74
@biglon74 22 сағат бұрын
@@DoItYourselfDad what model???
@DoItYourselfDad
@DoItYourselfDad 8 сағат бұрын
@@biglon74 I have the older model of this one: amzn.to/4e1zalm
@RavdeepSandhu
@RavdeepSandhu 3 күн бұрын
Good comparison review. Thanks
@jacklewis100
@jacklewis100 3 күн бұрын
It's not going to pick up anything outside the house - IR sensors don't work through windows.
@DoItYourselfDad
@DoItYourselfDad 3 күн бұрын
$50 off the unit using: DOITYOURSELFDAD Get it direct from Carpuride: carpuride.com/?ref=rgfgrjfu Carpuride W702: amzn.to/3wOffWk Touch Screen Glove Stick On's: amzn.to/3R1Lyrx Touch Screen Glove Paint On: amzn.to/4dUeY4Q
@UGotHookah
@UGotHookah 3 күн бұрын
So my question is can you make something like this and use it as a winter cover cuz I'm sick and tired of buying these pool covers they're not easy to install I'd like to do one kind of like an inground pool but it just clips to the pool and doesn't fall is it possible
@DoItYourselfDad
@DoItYourselfDad 3 күн бұрын
Im not super familiar with winter covers as we don't winterize pools where I live (doesn't get cold enough to have to deal with freezing). I haven't seen a method to use a roller on a winter cover.
@robertwilson2007
@robertwilson2007 3 күн бұрын
There is only one problem, he never tested a side by side, Non-modified Coleman vs a modified Coleman to see if there was any difference.
@jessicatrevino2597
@jessicatrevino2597 3 күн бұрын
great video!!!!!
@DoItYourselfDad
@DoItYourselfDad 3 күн бұрын
Thank you!!
@Throbbit
@Throbbit 3 күн бұрын
"hot water heater" who needs to heat hot water?
@sugarlanddoctors49
@sugarlanddoctors49 3 күн бұрын
Do not buy this. Very inaccurate - myself and another medical colleague followed the guidance of the device and it just didn’t seem right. Ended up with toxic levels of chlorine. (Brought a water sample to the store and had it tested as a comparison). Recalibrated and still not correct.
@coachlee7317
@coachlee7317 4 күн бұрын
what's the connectivity range on this S330 camera and Homebase 3
@DoItYourselfDad
@DoItYourselfDad 3 күн бұрын
My furthest cameras is around 75 feet form the base, through several walls, and is reading around 75% signal,
@jamess5415
@jamess5415 4 күн бұрын
Must be nice to be able to afford an outdoor pool. We’re struggling to afford ramen.
@DoItYourselfDad
@DoItYourselfDad 3 күн бұрын
It is....
@brawleytj
@brawleytj 4 күн бұрын
Thanks for the clear directions!
@apriljackson4435
@apriljackson4435 4 күн бұрын
Love the bear proofing.
@eugene188
@eugene188 4 күн бұрын
lol. I'm kind of glad the campgrounds I go to with my niece & nephew don't have ppl with their instas tagged. We are there to enjoy nature, not to compete with influencers.
@DoItYourselfDad
@DoItYourselfDad Күн бұрын
I just avoid camping on campgrounds….’problem solved.
@adrianpacurici
@adrianpacurici 5 күн бұрын
How long the filtre works vefore you need to clean it?
@DoItYourselfDad
@DoItYourselfDad 3 күн бұрын
It depends on how dirty your water is when you start filtering it.
@Falconurbex
@Falconurbex 5 күн бұрын
I did thos for my sons tirtle tank but i had the pup imside the pond and i use a bucket for a external filter so 1 pump in pond woth pipe running to no2 the external filter 2 pipe from external filter back into the turle tank amd it was lovely amd clear oh and i used lava rock and i ran out of the fiber stuff so i use the fiber from the inside of a ild quilt oe bedding stuff and it worked perfectly everytime.
@jimp1252
@jimp1252 5 күн бұрын
Slurping coffee is rude and irritating. This is the reason KZfaq Videos have to be scrutinized.
@DoItYourselfDad
@DoItYourselfDad 3 күн бұрын
I do what I want....
@kedelbach
@kedelbach 5 күн бұрын
nice review. How is it holding up after 1 year? Still working, accurate results, etc? thanks
@DoItYourselfDad
@DoItYourselfDad 3 күн бұрын
Last summer we actually put in a salt water in ground pool, so the one in this video is now living in my parents pool, we got the salt one for our new pool. Both are holding up well, we did need to recalibrate the one at my parents house but both are reading fairly accurately. I still double check its readings from time to time with a drip test kit.
@kedelbach
@kedelbach 3 күн бұрын
@@DoItYourselfDad excellent, thanks. After some research on the "Oxidation Reduction Potential" measure, and based off yours and another solid review, I orderd one yesterday. Hopeefully will get many years of reliable use of out it - with replacement probe/battery every couple years. Cheers! Kurt
@mcmash9571
@mcmash9571 5 күн бұрын
Can you sand these down and put a coat of something down
@DoItYourselfDad
@DoItYourselfDad 3 күн бұрын
Do you mean the floor itself? Engineered floors cannot be sanded.
@ChrisKadaver
@ChrisKadaver 5 күн бұрын
Why does affordable printers have so stupidly small build area? I mean for 50 extra USD you should be able to get like 50x50x50 (cm) at least. It's just slightly more material cost to scale up the size, right?! Also, why can't they print pellets. Filament is too expensive for what you get. A scam.
@DoItYourselfDad
@DoItYourselfDad 3 күн бұрын
While I'd love something that big I don't know how much of an actual market there would be for something of that size. The build plate would swings out past the base of the printer by quite a bit making the footprint of printer larger than most hobbyists would have room for. My larger printer (LK5 PRO) wont fit on a standard workbench, I had to build an extension for it) As far as pellets, I've seen some printers working with pellets recently, and they are getting better, so we'll see what the future holds.
@ztark_nap
@ztark_nap 5 күн бұрын
Pls tell me you compost the leaves or put them In a green bin and not to the garbage truck?!
@DoItYourselfDad
@DoItYourselfDad 3 күн бұрын
Our local waste management has green bins that go to compost.
@robertgordon5954
@robertgordon5954 5 күн бұрын
How does it hold up after 2 years of Phoenix Arizona? What will it look like exactly?
@DoItYourselfDad
@DoItYourselfDad 3 күн бұрын
I've now had mine 4 years in Southern California, not quite as hot as Phoenix, but hot. I treat it with the convertible topper stuff from Chemical guys and the top still looks good. I have had some splitting around the corners at the back that needed to be mended.
@L6FT
@L6FT 5 күн бұрын
How often do you replace the cotton cloth material? Any other type of material you would consider using?
@DoItYourselfDad
@DoItYourselfDad 3 күн бұрын
I clean it out and reuse it.
@L6FT
@L6FT 3 күн бұрын
@@DoItYourselfDad How often abouts once a year or so?
@Halfwheelhell
@Halfwheelhell 5 күн бұрын
without reading the instructions on the pvc glue, I recall quarter turns on fittings to make certain the glue contacts fully. I probably would have spun those unions, and sanded them a bit. maybe that's a bit more belt and suspenders... thanks for posting the video!
@kevinwang4870
@kevinwang4870 6 күн бұрын
Nice video. When traveling out of country, do you need to change the region in Eufy app settings to access devices?
@DoItYourselfDad
@DoItYourselfDad 3 күн бұрын
I haven't had issues, but I'm not sure if there would be issues from country to country.
@kenburnette1121
@kenburnette1121 6 күн бұрын
Good job!
@DoItYourselfDad
@DoItYourselfDad 3 күн бұрын
Thanks!
@krisgalicia6375
@krisgalicia6375 6 күн бұрын
Thank u
@DoItYourselfDad
@DoItYourselfDad 3 күн бұрын
Thank you!
@denysesewell8848
@denysesewell8848 6 күн бұрын
Would it be horrible if I ran air condition and don’t vent it?
@DoItYourselfDad
@DoItYourselfDad 6 күн бұрын
Yes, you would actually be heating the room instead of cooling it.
@denysesewell8848
@denysesewell8848 6 күн бұрын
I already have a portable a/c. It is nice. Toshiba. I have two cats that I put in the garage at night. I do not have a window in my garage. I am not sure how to do all this but I think I know a man at my church that has his own air condition business. I live in Arkansas and it get so hot in garage for my cats. This is great idea. Thank you for sharing.
@theplettz4569
@theplettz4569 7 күн бұрын
Have you tested this with the Homebase 3? If so, what compatibility features does it offer when paired to Homebase 3?
@DoItYourselfDad
@DoItYourselfDad 6 күн бұрын
Yes, I have. I actually switched everything over to HB3 a few months ago. Everything works as it did on the HB2.
@distilledfreedom1840
@distilledfreedom1840 7 күн бұрын
Can the light be disabled for the S340/solar camera? If I wanted it to be hidden and stealth? My wife is home alone in our cabin deep in the woods at night while I'm at work. I just need something that notifies my phone if someone is approaching the house. No wiring option, so the S340 seems like the first camera to get if I wanted to add more and a base station in the future. I'm hoping our satellite internet will be enough to keep it running. Thanks!
@DoItYourselfDad
@DoItYourselfDad 3 күн бұрын
Yes, the light can be disabled and you can set the camera up to just run with night vision instead. If connectivity is an issue I am currently playing around with one of their cameras that connects via WIFI but can also use cellular data as well.