Thank you so much. I have been so busy that I haven't really got mine out much but this weekend my Grandson came over and we bashed them real hard. Trying to crash into each other and have duals. Head on collisions were not a problem. Absolutely nothing broke. Thanks again for the sub. 👍🚙

Thanks so much. Greatly appreciated. 👍 1/10 RC On Road Tires and Plastic Rally Wheels 12mm Hex Drift Tires 4PCS (Black) www.amazon.com/dp/B0CTMPXRQP?ref=ppx_yo2ov_dt_b_product_details&th=1

Aww thanks my friend.

Thank you Sir. I honestly value your comments with high regard. You and Rek RC have both been their supporting me from the beginning. I totally apricate all my subs but your channel is super well known and it just feels good that you take the time to comment with so much traffic on your channel.

I crash every time I go out but I normally don't post it. At this point It would take me for ever to find the clips because I have so much. Normally things are not that expensive on my cars. Today I took out 4 of my small cars to bash in the street with my Grandson who was visiting. The Losi mini LMT and the Team Associated MT-12 van didn't hold up worth a duce. The 2 mini Typhons beat on each other for 2 packs and nothing broke. We were going head on trying to destroy the other guy so to speak. I did get some footage and hopefully can post it soon. One good thing good about these small cars is that parts are cheap. The LMT will cost $8 and some change for a complete set of 8 link supports. Only one broke and the mini Typhon harpooned it. Best fun ever ..

@@RCRoads Perhaps a channel name change to RC Road"Rash". lol. Sounds like you and your grandson had a "grand" time

1/10 RC On Road Tires and Plastic Rally Wheels 12mm Hex Drift Tyres for 1/10 Scale Racing Touring Street Car Tamiya TT01 TT02 XV01 TA06 A959 144001 HPI KYOSHO HSP PTG2 Traxxas 4PCS (Black) www.amazon.com/dp/B0CTMPXRQP?ref=ppx_yo2ov_dt_b_product_details&th=1

Thanks buddy. Always a pleasure to hear from you. 👍😁

Thanks my good friend. As for my editing I do the best I can. I recently bought a new computer to replace my old one and it's called the "OMEN" should have been called bad omen. The video card must be the problem but it makes it hard to edit but I push hard to try and get my cuts but the lag is intolerable. As for my camera angles I usually go with 3 cameras and place them at different angles. I filled this with a DJI Action 2 on a selfie stick. Super cheap and small camera and it shoots 4k at a higher frame rate than my Go Pros. I will probably take more time on my next video. I think I will post shorts for a while and work on perfecting a video with a plot. I always rush my post to try and keep the channel going. Your kind words and complement drive me to do more. Have a great weekend and enjoy your killer 50cc epic RC. ✌👍

@@RCRoads Yeah video really puts a strain on the GPU. I usually put a fan on my laptop when Davinci Resolve is doing its rendering. I'll be watching for your next masterpiece.

@@RCWalletVacuum Indeed. I could get a new power supply for my old computer or perhaps move the video card over and pray. lol Davinci Resolve works good for me. Easy to navigate and has plenty of features that I have not explored yet.

Thanks so much for the nice comment. The Losi Hamer Rey is a real nice rig. It must look awesome in the mud. I think by next winter there will be some water and mud in my area. Right now everything is drying up. I dread the thought of getting my new Lasernut dirty but that's what RC's are made for. Thanks again for visiting my channel. Enjoy the weekend. 🔨Rey

Thanks my friend. Super fun little buggies. 👍

Thanks for watching. I'm really enjoying the Lasernut and it's ability to get over the rough stuff. Super fun to drive.

Thanks for watching. Appreciate it. ❤

@@RCRoads 😊

Thanks my friend. 😁✌

Thanks Boris. Hope your enjoying my videos.

Thanks so much. They are very nice RC's and I plan on getting them out. I was going to take out my Lasernut next but I will take one with me and bash it in the dirt.

Thanks for checking out the video and the valuable information. I had no idea that parts from a 6s Arrma would fit on a 3s platform.

Thanks Panda. It's always a pleasure to get your comments. ⚡❤

You're welcome my Friend! 🐼🏁🐻‍❄️👍🏻 Have a Great weekend ❤

Thanks my friend. I'm really enjoying the hobby and good people. You have an Awesome weekend my good friend.

Thank you so very much. I made this video for people who are new to my channel so it would give them an idea of what cars I run. I actually have tons of footage of each car in separate folders but finding the good stuff is hard. Thanks again for watching and supporting me. 👍👍

Thanks my friend. I really appreciate your support.

@@RCRoads 😆👍

Thanks so much. I love to paint with spay cans mainly for the incredible aroma they produce. I think I have plenty of cars now and just need to enjoy them. My wallet is getting thin. lol

@@RCRoads I'm guessing the local hobby shop knows you by name,lol.

@@RCWalletVacuum The manager does. Nice guy and he even brings his dog to work. I should try to see if I can get a job there. lol

@@RCRoads If they have an employee discount i'd say sign on up.

Thanks bunches. They are very cool mini's and easy to work on.

@@RCRoads I have a blue grom and it's stock I have plenty of fun with it 😎👍

@@richardbrown6762 I like the blue body better than the red one.

@@RCRoads I've also got the losi nascar on order now and some of the parts are interchangeable with the GROM can't wait for that to arrive it's 1/12 scale a basketball court will be big enough to race with my friends and enemies 😁👍

@@richardbrown6762 That's good to know. Losi makes some great cars. I have a mini LMT and a Lasernut and they are extremely well designed. My 2 favorite brands are Arrma and Losi. 👍😁

Thanks RCWV. It's intended to be a trailer for my channel. It's for the non believers. You can have a few cars and still manage to put food on the table. "Life's Good" Happy Fathers day

Thanks for watching. I had no idea they even made a Mojave Grom. Wow I just checked it out and they look nice. Same price as the Typhon Grom. The older I get the more I'm leaning towards the smaller scale cars.

​@@RCRoadsI'm 68 and I have a losi mini b and a typhon grom and I'm happy with both of them 😮😎👍

@@richardbrown6762 The Losi Mini B is a super nice RC. I love how that thing looks. I'm 66 so you have me beat. At least we are both getting exercise chasing our car around.

@@RCRoads no I'm to old to chase my car and I don't jump mine eather I'd rather play with mine instead of working on it lol😆😎💕

I'm waiting for the Mojave grom and have fun with it and I have a losi nascar on the way all three are related with the same parts also 😎👍

Thanks for watching. The street tires are available on Amazon. They have foam inserts but I just noticed today that they are not glued so you'll need to do that. Here is the link www.amazon.com/dp/B0CTMPXRQP?ref=ppx_yo2ov_dt_b_product_details&th=1

Thanks for watching. 👍👍

You're welcome my Good Friend 🎉 Cheers 🐼👌🏻

Thanks GB. These mini sized cars are super fun. I actually painted 2 bodies yesterday and they came out decent. The Typhon Grom comes in blue or red but perhaps the sun made the red one look orange. Anyways.. I don't thin I'll dump too much into these cars but after I run them on the street a bit they will both be hitting it hard in the dirt and skate parks.

Thanks for your helpful comment. The MT-10 is a great performer and the mini LMT is too. The EXC Amp was a gift from my Son so it's dear to my heart. ❤👍

Thanks my friend. 😁

Thanks my friend. I needed something for first time visitors to my channel. Working on my Typhon Groms and Lasernut to come up with something interesting. So many great videos out there and it's hard to compete but it sure is fun trying.

Nice rc action

Thanks so much for watching. I got into RC's about 2 years ago. I crash and break the DR-10 every time I take it out. It breaks and I patch it up. I try not to spend any money on this car and just scab parts together to see if it's drivable. The steering is quite radical and the slightest correction and it kisses the curb. My big dream was to make a sand rail out of it but it's just no fun driving 2wd in the dirt. The hobby is quite addicting. I'm at 14 cars already and they are all still working. I try to repair them as they break. I really should get into crawlers but so far I haven't done that. I do have an Everest 10 and I modified it so that it would break lol. Now it's back to its stock form and I really should get it out for a run. Thanks again for watching and I will definitely be rooting for you.

Thanks a lot. The tank is actually fun to drive in the dirt. The manufacture recommends metal track for going offroad but so far so good. Filming it is fun as it's not very fast. 👍👍

I have not upgraded the diffs yet. The motor and ESC I have in it now isn't that powerful. I think I'm going to compare the 2 out in the dirt, I just received a set of aluminum shocks from Arrma today. I must say they feel plush. I might be leaning towards the smaller cars for ease of transport but man the Lasernut is a real blast and needs some play time too. I like to upgrade and mess with the cars. I ordered 2 clear bodies for the Typhon Groms and they were super reasonable. I guess diffs will be next. Not too many donuts and I think they should last with my driving.

@@RCRoads I'm a big fan of small RC cars. When it comes to RC, the only size that matters to me is the size of the fun! Big cars are a blast, but can be a bit of a hassle to lug around and maintain batteries for, especially if you're running 2 batteries to make 4s, 6s or 8s. Not that you have to do it that way, but I guess I'd rather have more batteries than less. But charming up 4 3s batteries to run 6s in two RC trucks can be a pain. Small cars have the speed, the quickness, and are actually sometimes MORE durable, relatively speaking. I love little RC cars as much as a massive one.

Seems pretty quick to me. I have purchased some of those off brand esc motor combos myself and have had them cog pretty bad. Don't know your gear ratio installed but over gearing will cause cogging too or bottle necking amperage through small connectors or insufficient Guage wires. May need higher CC rating. Yet without high temps and running only 2s I'd lean towards more amps like a 3s just to see if it helps. Also you may be able to pick up a program card for your esc. That could make all the difference. Looks like a blast though. I'm dealing with the same issue but on the other end of the size spectrum. Put a 12s system in my xrt and have cogging. Waiting on the new motor to see if that fixes it. But when it does take off its ridiculous. Blew my belted front tires right off the rims! Lol😂

@@nicholashunt1983 Thanks so much for watching the video and special thanks for helping me out. The Groms are new to me and I really didn't plan the install that well. I had 3 spare motor / ESC combos that I had and one actually fit so I gave it a go. I had actually bought this motor for my MT12 but the saft length was too short. I feel like an expert at purchasing the wrong parts for my cars. I'm always trying to save money and it ends up costing double. Anyways I have fun with it. I will have to check out your 12s beast to see how it does. The XRT is an incredible RC for sure.

I totally agree. It's really just something fun to try. The Grom is just a little bit under powered but I would think that a better battery might help. I'm hoping that the extra power will help the car get more air off jumps. Thanks for watching and commenting. 👍👍 I plan on leaving the red one stock and just bash with it.

​@@RCRoads20+mph is not bad for a mini I'll wait until they come out with adjustable turnbuckles and camber links and then I'll make mine faster 😮

@@richardbrown6762 I honestly think that there will be tons of upgrades available for this little guy. The hobby store I go to had like 10 of them and they all sold quickly. I just painted 2 bodies last night and the paint cost more than the clear bodies. Stock parts are reasonable and for the most part I'll stick with plastic parts. I mostly drive off road so eventually they will both be bashers. I just think a bit more punch for hitting jumps would be nice.

@@RCRoads well I don't jump my cars it's to expensive for parts IF you can find them that's my problem now my hobby shop don't seem to have any 😯😐

@@RCRoads I've got a losi nascar on order now and some of the parts from the arrma grom and typhon are interchangeable 😎👍

I has more power than the sock brushed system and will probably get a proper upgrade some day. I just noticed some guys are mounting the ESC in the battery tray and going with a shorter battery. Either way these little cars are low suctions on the wallet. lol

@@RCRoads It is actually funner with the small scale since it is such a major pain getting the 1/5th scale all setup, then if you crash bad...well it gets ugly fast

@@RCWalletVacuum I must agree but the awesomeness of a large project can't be matched. 👍

@@RCRoads My checkbook disagrees, lol

Thanks Panda,, 😊❤the small cars too.

You're welcome my Friend ❤ Cheers 🎉

Thanks for watching.

Thanks for the kind words. I'll post a video of it when they come in,,,, and bash the red one as hard as I can at the dirt bowl where I normally drive. 👍

Thanks for checking it out. It's a cool basher and the weight is in the chassis and the body doesn't effect it's cornering that much.

You're welcome my Friend ❤!!! Is a Bashing Machine and a Good Looking one to❤

lol I always get a big kick out of your comments. This was the handy caped event.

Thanks Panda. The 3s Typhon is plenty fast for my driving skills. 👍👍

HéHéHé 😂 i Truly understand very well that Struggle 😂

Thanks for watching GB. 👍👍