How can I get in contact with you. And are you still repairing phantom four pro batteries. I have. One that is doing exactly what this one in the video is doing.
@oscarkaeiln18 күн бұрын
Great video. Saved my drone. Thank you!!
@MuhammadAbdullah-x5u18 күн бұрын
do you still service?
@clarencedstapleton8904Ай бұрын
Good day. Are you still repairing Phantom 4 Pro batteries? I have two that need repaired and reprogrammed.
@kilkennyvfxАй бұрын
Just watched this tutorial and now have a working drone! Thank you kind sir!
@beautifulhymnalmusic82892 ай бұрын
I have two Phantom 4 batteries that need to reset, do you still do them? Sent e-mail to you but properly went to your junk mail.
@frankdegerth2 ай бұрын
why are you not using the reset button on the battery? just jumper the reset button and the battery minus.
@HyperFliteDronesАй бұрын
It will not work.
@janihook6862 ай бұрын
Thanks for this video! I had a broken rear arm rotating axis part. Ordered new one from Ebay and I was able to replace it by myself because of this video 👍👍👍 Thanks once again 🙌
@HyperFliteDronesАй бұрын
Great to hear!
@richardlong15672 ай бұрын
Fantastic explanation - but the music isn't necessary and so repetitive! Thanks again.
@bagiamin52893 ай бұрын
thanks for your educate vedio - what is module of programmer , used here
@MrHunglo1234 ай бұрын
hi can you fix my drone battery ?
@Yayaytytyyty4 ай бұрын
I guess I need to buy a new battery
@tom.b8975 ай бұрын
Thanks for the video. My drone has a problem with the horizon. As the altitude increases, the horizon becomes slanted. I have a video of it here 6gTjPYdv9RM What is the reason for this, what is the cause?
@HyperFliteDronesАй бұрын
Damaged motor or cable.
@brucesabatoni34105 ай бұрын
Do you still offer this service? Do you work on phantom 3 batteries?
@xxCBOxx4 ай бұрын
I Would like to know too as I need 2 repairing
@HyperFliteDronesАй бұрын
I do not service phantom 3 batteries
@favourjohnson17185 ай бұрын
how can i sip my battery to you from Nigeria
@coacharchierabanz24885 ай бұрын
Hello sir ,where we can get that module box ?
@user-np6bv7to1g6 ай бұрын
Hi my gimble is straight at startup than goes to left and gets a gimbal motor error, do you think it’s a bad cable? 27:29
@HyperFliteDronesАй бұрын
Most likely an issue with a gimbal motor.
@noiamdnicklaus7 ай бұрын
What program do you use to calibrate on the computer?
@julioaces14248 ай бұрын
Hello, does the MSP430 controller (EV2400 mini) work?
@HyperFliteDronesАй бұрын
I do not know.
@wild_n_38 ай бұрын
What do you do if very first 2 screws rusty and thread is gone any other techniques we can apply ?
@HyperFliteDronesАй бұрын
You need a small grinder to turn them into a flat head which is easier to unscrew. You can also warm up the screw with a solder iron.
@udi.9 ай бұрын
Really helped me! great tutorial! thanks :)
@MrSKB6910 ай бұрын
Fook that, am gonna stick a nail through both of mine LOL
@wildirishladdavy796510 ай бұрын
What is the glue you used ?
@MyAdventureHat2 ай бұрын
Any answer on this?
@kilkennyvfxАй бұрын
@@MyAdventureHat loctite super glue gel control works just the same
@MyAdventureHatАй бұрын
@@kilkennyvfx Thanks!
@friartuckfriartuck10 ай бұрын
maraming salamat po!!! MABUHAY!!!
@Glenn-Reviews11 ай бұрын
Hi. Fantastic video. Thanks to you I was able to repair my drone that had a broken arm axel. Instead of a big bill it cost me % euros for the part!!! Thanks so much. Good job
@danieladams385811 ай бұрын
Hello i have two phantom 3 batteries never use not even first charge any way you can save them
@thomasgilbert692411 ай бұрын
Can I use st link or cjmcu 2112 adapter
@user-vy5mu3dk4w Жыл бұрын
How can I charge dead battery without taking it apart also what pins can I check the voltage on from the back of the battery
@HyperFliteDronesАй бұрын
You will not get any voltage to the pins.
@florinberechet6375 Жыл бұрын
I have a problem with my Mavic 2 Zoom, some jitter on yaw axis appear from time to time(no error message for the motor though). You say something about some bad batch of yaw motors... Could this be the cause în my case? I bought the drone S-H, the seller swored it did not crash it, there were no signs but I couldn't see the problem with the yaw motor then but when it was too late to return it. The gimbal is mechanically fine, end points are ok, no springiness, no bendings...I now have to decide between buying a complete gimbal or just the yaw motor. Any idea, please?
@user-rj8vt2wk3v Жыл бұрын
Quiero la Información donde mandar mi batería te hi el mismo problema
@YL-mc9oz Жыл бұрын
Hello, I really enjoyed the video and your explanation! I wanted to ask if you happen to know what the white glue that DJI uses is? (On the wires of the drone so they don't move and also in the battery you can see it above) Thanks
@kinginamez4055 Жыл бұрын
Its better to Buy a nrw one.
@jaredbarnett7756 Жыл бұрын
Where can I find these parts? Like a replacement yaw motor?
@Menace.The.Dennis Жыл бұрын
Do you still service Phantom 4 batteries?
@thefouramigos4795 Жыл бұрын
My motor is seized it wasn’t spinning when I got it out of the bag, it won’t rotate freely but is receiving power. Also all of the lights are the exact same as yours.
@Pistache_y_Turron Жыл бұрын
Hello thanks for your video I am trying to balance a DJI Phantom 4 Dron smart battery. After watching your video got a Venom PRODUO charger. After opening the battery I found out that the conector or balancing lead of the battery to the BMS Board is a 5 pin JST SH 1.0mm and the 5 pin female conector of the Venom charger adaptor is a JST XH 2.5 mm. I am ready to make a custom conector male JST XH 2.5 mm to a female JST SH 1.0 mm, my only concern is the order of the cables. Can you help please? I just want to know wich pin in the 5 pin female JST XH Adaptor is the ground as I have 5 cables in my battery balancing lead, 4 reds and one black. Thanks for your help
@alejandroma233311 ай бұрын
Hola. ¿Pudiste solucionarlo? Tengo la misma duda.
@Pistache_y_Turron11 ай бұрын
@@alejandroma2333 no, resulta que el conector no es el de 1.0 mm. Lo que le quedó perfectamente fue el Micro JST 1.25mm Pitch Male Female Wire Connector 1.25mm 5P JST Plug Jack Terminal Cable Connectors Length 15CM. Ya venían precrimpiados y seguí el mismo orden. Los compré en AliExpress y funcionó muy bien.
@BigDShakes21Gators Жыл бұрын
Solid video bubba …. Completely appreciate it… helped replace my rear arm … cheers mate
@Dronestar1979 Жыл бұрын
Hi how I send my batteries to you for repair? Also, how much do you charge per battery? Thanks.
@sir_maherk5220 Жыл бұрын
Great, but you didn't show the lipo balance settings... Could you please confirm your settings. Thank you
@shabadooshabadoo4918 Жыл бұрын
2-3 amps. how many volts? does it matter?
@sonhaiphan4788 Жыл бұрын
Hello brother, can you give me a address to repair battery drone 4 please, thanks
@oneeyedrone4293 Жыл бұрын
Sent you a msg on your website, p4p white battery with this issue here as well.
@driz3463 Жыл бұрын
great tutorial, unfortunately my soldering skills aren't as great though and I screwed it up!
@volodymyrskrypnk1898 Жыл бұрын
So how to calibrate the drone?
@hennobarnard Жыл бұрын
Great video! Replaced my cable and all works well. Thanks!!!
@maastudiototanabk Жыл бұрын
Thank you sir
@mariacarpenter3287 Жыл бұрын
Where can I purchase an arm that is legit and reliable?
@Saleh1 Жыл бұрын
Why are you charging it with NiMH when it is a lithium-ion polymer battery.
@Saleh1 Жыл бұрын
What does it mean when the DJI phantom 4 battery is showing all 8 lights on but they are really dimmed after I charged it to 15.52V.
@volkanoadams811 Жыл бұрын
hello sir i have same battery 5 piece i never use but now i try to charge but nothing i both it before 4 years can you help me please