Love fixing with beer. Tastes good and works good too.
@fixitwithbeer243511 күн бұрын
You got that right!
@ruckinehround696511 күн бұрын
@@fixitwithbeer2435 so I switched to using 5w30 in our well my sons now car2018 crosstrek . We have had it since new 6speed MT. Only has 45000km about 28000 miles. I do all the maintenance I did notice it started using a bit in the warm summer months last year, so we switched to 5w30. Now it uses about 500ml or half a quart in 5000km . We will just run the 5w30 from now on .
@fixitwithbeer243510 күн бұрын
@@ruckinehround6965 Several people mention the oil consumption in the comments. It has not been my experience, but I like your solution. I just changed the oil on the Subaru last weekend and it was full but I am going to keep watching it. I will post it if I start to see any consumption.
@T_ROLLA_DACOLDEST13 күн бұрын
👍🏿
@fixitwithbeer243513 күн бұрын
Thanks for watching!!
@kevinrunyon866213 күн бұрын
Nice work. Looks way too hot there.
@fixitwithbeer243513 күн бұрын
We are in the official dog days of summer. Hopefully it breaks in the next couple of weeks.
@gs3racing59417 күн бұрын
thanks!
@fixitwithbeer243517 күн бұрын
@@gs3racing594 thanks for watching and the subscription!
@VickiBacon-k8t29 күн бұрын
Why do you have a Wisconsin license plate that's 50 years old?
@fixitwithbeer243529 күн бұрын
Good Catch Vicki. I have a stash of old plates in case I ever have to disappear. My daughter was concerned about having her plate front and center on KZfaq. However, if you look at the other Subaru videos, her plate is probably less prominently featured. Thanks for watching.
@raiderdavesterАй бұрын
Didn’t even get your hands dirty! Nice work!
@fixitwithbeer2435Ай бұрын
All beer, no work!!
@raiderdavesterАй бұрын
Those are some good lookin’ Ford Blue jack stands doing the heavy lifting!
@fixitwithbeer2435Ай бұрын
I had to borrow those extra heavy duty jack stands. I probably owe a guy an oil change (Costco of course).
@kevinrunyon8662Ай бұрын
Coors is delicious.
@fixitwithbeer2435Ай бұрын
I do love a Banquet Beer.
@kevinrunyon8662Ай бұрын
Nice work!
@fixitwithbeer2435Ай бұрын
Thanks Kevin. This was a rewarding project to get checked off the list.
@cappy032Ай бұрын
What size is the oil filter wrench and drain plug size?
@fixitwithbeer2435Ай бұрын
I am pretty sure that the drain plug is 15MM. The filter cap wrench is about 3 inches. It measures 3 1/8” outside. Not 100% sure and the Rnclve has found a new home. I hope this helps. Thanks for watching.
@billdelap9757Ай бұрын
Thanks!!! You saved me a ton of unnecessary work!
@fixitwithbeer2435Ай бұрын
Thanks for watching. Glad the video helped.
@saab9-5Ай бұрын
Spray paint them so they dont rust as easy it works pretty well
@fixitwithbeer2435Ай бұрын
Great idea. I don’t have much of a rust issue here in Texas, but up North might be a big help. Thanks.
@WhereMyCountryLiesАй бұрын
you don't change the ring on the plug? no clearflood?
@fixitwithbeer2435Ай бұрын
Most commented on item in my KZfaq life. To change or not to change? I haven’t had a drip yet. Thanks for watching.
@WhereMyCountryLiesАй бұрын
@@fixitwithbeer2435 you wait to have a oil leak to change it? it costs like 10 cents.
@WhereMyCountryLiesАй бұрын
Subaru's oil filter don't make this mess when you remove em
@fixitwithbeer2435Ай бұрын
That is the best part. I hate that food from the side or bottom mount. Thanks for the watching.
@brianknight37502 ай бұрын
Awsome! I am looking at buying a crosstrek and thatbabout seals the deal thatwas the easiest oil change ever. No funbling with the oil filter and getting it innthe face no ramps and that whole fiasco you can just roll up on some boards. 😅 that ground clearce is amazing for a car and everything was straight forward with no special tools. My old f150 was good like that and this is better all my other cars i couldn't even do because by the time i buy the ramps and risk damaging my car doing that it was better to get it changed . thanks for showing how easy it is on this car.😊
@fixitwithbeer2435Ай бұрын
Brian, it has been a great car. Thanks for watching.
@okieninety76132 ай бұрын
Let's see it done with the 4wd now. I've not come across that one for obvious reasons when you go to tackle it
@fixitwithbeer2435Ай бұрын
The 4X4 videos I have seen are a lot more intense than this one, but it can be done. Thanks for watching!
@elistutzman376023 күн бұрын
4x4 drive is problem this video should say for (2 WHEEL DRIVE ONLY)
@elistutzman376019 күн бұрын
@@okieninety7613 4x4 disconnect drive shaft and drop differential
@notebookrelaxation74372 ай бұрын
thank you for your video. Do we need to change crush washer?
@fixitwithbeer24352 ай бұрын
I think it is fine to reuse once or twice, but opinions vary. A lot of other comments on the crush washer with some good view points. Thanks for watching.
@dragonheadholden2 ай бұрын
love the chill background music
@fixitwithbeer24352 ай бұрын
Thanks for the watching. Liked and subbed you back. Keep making the tunes.
@dragonheadholden2 ай бұрын
Awesome tutorial, thank you! liked and subbed
@fixitwithbeer24352 ай бұрын
Thanks Holden. Appreciate the like and sub.
@raiderdavester2 ай бұрын
Almost felt bad putting my one branch out on the curb considering all the damage in my neighborhood! Probably the worst storm I’ve experienced
@fixitwithbeer24352 ай бұрын
You were definitely lucky on the on branch version of the adventure.
@kevinrunyon86622 ай бұрын
Nice work!
@fixitwithbeer24352 ай бұрын
Thanks Kevin. Craziest storm I remember as an adult.
@bertgummer81252 ай бұрын
How much oil did you put in ?
@fixitwithbeer24352 ай бұрын
Haha. Bert you caught me. The manual says 6.4 quarts. Honestly, I thought the Enclave was a 5 quart change. I need to get a note on the video to put in the extra quart. Thanks for watching and thanks for the catch.
@bertgummer81252 ай бұрын
@@fixitwithbeer2435 cheers brother. Yeah I needed to do the wife’s so I went searching on KZfaq. Came across your video lol. Thanks again
@shawnehutchison7389Ай бұрын
Don't you put oil around the seal on the oil filter?
@bertgummer8125Ай бұрын
@@shawnehutchison7389 you should fill your filter with oil before you install it. That will put more than enough oil on the gasket and threads
@eddiego81972 ай бұрын
did the oil plug have a 803916010 crush gasket?
@JB-vc2wl2 ай бұрын
1 year later, now 18 videos....Definitely things to subscribe to now.
@fixitwithbeer24352 ай бұрын
JB, thanks for hanging in. I have been having so much fun with my daughter making videos. We have a couple videos in the can and I have a couple bigger ones planned once the end of school year is squared away.
@peanizle9572 ай бұрын
Great video...Hold my beer, watch this!
@fixitwithbeer24352 ай бұрын
Thanks for watching!!!
@hofnerbass3 ай бұрын
Should you have installed a NEW drain plug washer?
@fixitwithbeer24353 ай бұрын
Probably should do it every time, but I have had pretty good luck reusing them once or twice. Thanks for watching.
@Bat21bravo3 ай бұрын
Mine was a 17mm Hoss not 14mm.
@fixitwithbeer24353 ай бұрын
Thanks for watching. I did a little googling because you had me second guessing my MMs. What I found was that the OEM Subaru replacement sold on Amazon is 17 MM vs original 14MM. So, very possible you have 17. Maybe the factory went to the larger one at some point. Thanks again for watching and keeping me honest.
@Bat21bravo3 ай бұрын
@@fixitwithbeer2435 10-4 yeah i just bought a 2018 Crosstrex limited from a local Subaru dealer 2 weeks ago. I thought my plug was replaced as it looks brand spanking. Dealr said they changed the oil last month but i just changed it yesterday and it was black as coal and overfilled of course which is a common occurence. Put Schaeffers 0-w20 the best oil brand ive used. The boxer 2L is purring like a kitten. Thanks for making the video.
@fixitwithbeer24353 ай бұрын
Good Luck with the new to you Crosstrek. My daughter loves it and I even like to drive it when she lets me.
@CADIMPRESSIONS-46593 ай бұрын
Thank you so much! Your instructions made my life a lot easier
@fixitwithbeer24353 ай бұрын
Thanks for watching. Glad the video helped.
@experienceprecision54063 ай бұрын
Do you have to drain the oil
@fixitwithbeer24353 ай бұрын
I watched a video of a guy that did it without draining. He claimed to only lose a quart in the lines and draining out of the attachment points. Good luck and let me know how it works out.
@experienceprecision54063 ай бұрын
@@fixitwithbeer2435 will do. Thank you for replying
@mitch2k193 ай бұрын
Hi thanks for the video, I'm new owner, Limited 2022 Crosstrek. Is there a reset to do after the oil change ?? G'day !
@fixitwithbeer24353 ай бұрын
Thanks for watching. I bet you are going to love your Crosstrek. There is a reset, I remember it was easy, I just cannot remember the sequence. Maybe that should be a quick video for the future.
@Charkatak4 ай бұрын
Don't have Subaru, however looked at a new Impreza RS today. Was just wondering how real is the oil consumption on Subarus?
@fixitwithbeer24354 ай бұрын
Thanks for watching. We bought the Crosstrek with 60,000 miles 2 years ago. Now it has 82,000. I have changed the oil 3 times. Never noticed any oil burn at all. Checked this morning. No oil burn at all. Great car so far.
@Charkatak4 ай бұрын
@@fixitwithbeer2435 Good to know! It is just I have searched on different forums and there were plenty of posts/threads about "low oil" indicators which would come up during regular OCI. As for 6h gen Impreza, there was not info about oil or other issues on the forums. Thanks!
@fixitwithbeer24354 ай бұрын
And for what it is worth, my daughter drives it like a Formula 1 car. Good luck.
@MW-bz1qe3 ай бұрын
5 years of ownership of a Crosstrek, never uses a drop of oil between 6k oil changes
@1STSUN5THCHILD4 ай бұрын
GREAT VIDEO. I HAVE TO DO THIS ON MINES. COULD YOU TELL ME THE NAME OF THE RAMPS YOU USED FOR YOUR TRUCK. I NEED SOME AND I DONT KNOW WHAT ONE WILL HOLD
@fixitwithbeer24354 ай бұрын
Thanks for watching. If by ramps you are talking about under the tires, I just use a couple of scrap pieces of 2 X 6. My garage floor and driveway create a little valley. I use the scrap lumber to give me a little more room. No fancy ramps for me. Glad you enjoyed the video.
@petervick-km6on4 ай бұрын
You should take the oil filler cap off before removing the drain plug so the oil drains quicker.
@fixitwithbeer24354 ай бұрын
Peter, thanks for watching. I am always trying to slow the oil down so that I don’t make a mess with the initial splash, but good idea if you are in a hurry.
@paulparker40104 ай бұрын
Interesting so you don't fill the oil filter before you put it on your car and I haven't ever heard of doing it that way.
@fixitwithbeer24354 ай бұрын
Paul, never really worried about it. Figure the pump fills it pretty quickly. Another commenter mentioned that there is a process with the start sequence for that. I have not gotten the manual out to confirm.
@mattr72744 ай бұрын
That was fun. Thanks for the educational entertainment. Looking forward to your next video.
@fixitwithbeer24354 ай бұрын
Glad you enjoyed it Matt. Thanks for watching.
@chief19604 ай бұрын
MEXICO MADE ENGINE UGH. WAIT FOR PARTS IS IN YOUR FUTURE.
@fixitwithbeer24354 ай бұрын
Thanks for watching. I am hoping that they have worked out the kinks on this motor, if not there will lots of material for KZfaq videos.
@JasonNugent4 ай бұрын
Enjoyed the video. A few things - it's always worth replacing the crush washer on the drain plug. Perhaps you did this, but you didn't show it. Also, the first start after doing one of these, you should perform a "clear flood start", where you hold the gas pedal to the floor and crank the key for a few seconds. This turns the oil pump so your oil filter gets primed because it is empty right now. This helps with preventing oil starvation right at the beginning. It's in the manual.
@fixitwithbeer24354 ай бұрын
Awesome information Jason. I am going to read the manual on the clear flood start. Thanks for watching.
@mattdjmorris4 ай бұрын
Can you please help me figure out which way the crush washer goes on or does it matter? One side is smooth, the other is rounded. Thanks!
@fixitwithbeer24354 ай бұрын
Matt, thanks for watching. Quick Google tells me flat side towards the engine and rounded towards the head of the bolt. It makes sense to me.
@mattdjmorris4 ай бұрын
@@fixitwithbeer2435 thanks for the response. The parts guys at the l🥲local dealer said it doesn’t matter but I like the orientation you suggested. 🙏🏻👍
@smithwesson7149Ай бұрын
I had not heard of people suggesting to change oil drain gasket with each oil change until about the time that KZfaq came along showing oil changes. Maybe I'm just lucky but I have never replaced the copper or metal washers in 40 years of doing hundreds of family oil changes and have never had any leaks at the drain bolt.
@MikeG.-sz5ht4 ай бұрын
I'm out of beer
@fixitwithbeer24354 ай бұрын
Get to the store….like now! Thanks for watching.
@BellaRocko4 ай бұрын
I really enjoyed this video. Well done, sir! And yes, it is the same as in the GMT 800 6.0 trucks as well. The only difference I see is your oil pan drain plug is 90 degrees off-set from the GMT 800. Everything else looks the same. For those asking, you really don't need to drain the oil pan, but make sure you top it off when you're done.
@fixitwithbeer24354 ай бұрын
Thanks for the confirmation on the 6.0. I am glad you enjoyed the video. Thanks for the support.
@gearsdan4 ай бұрын
question. i have the '24 Crosstrek and had 2nd oil change done at dealership. they used OW-20 when it should be OW-16. If I do my own oil change and decide to use OW-16, do I just drain it normally like in the video, or do i need to do something else?
@fixitwithbeer24354 ай бұрын
Hello Dan, this is the first that I have heard of the 16. I did a quick Google and maybe learned a little. Everything I read seemed to indicate the 16 could run on the 20, but should have the 16. If it was my brand new ride, I would tell the dealer that they need to get the right oil in it, like now. If they are not going to do that, I would change it to the 16 at 3,000 miles. I am no expert, but I would just do a regular oil change and not worry about any residual 20 left in there. Thanks for getting me into 2024 with the 16 discussion and thanks for watching.
@dawson91b4 ай бұрын
Add a few more beers if you’ve got the 4x4 version.
@fixitwithbeer24354 ай бұрын
LOL. I have watched a couple of those videos. Definitely increases degree of difficulty. Thanks for watching.
@dawson91b4 ай бұрын
@@fixitwithbeer2435 Yeah I went to unbolt the line and right away I realized it was going to be a lot more difficult than your experience, but not too bad. The only other steps are take off exhaust manifold heat shield, unbolt passenger side motor mount, loosen strut bolts, drop front differential, and jack the motor up a little. Really enjoyed your video. You’ve earned a subscriber. 🍻
@fixitwithbeer24354 ай бұрын
Thanks so much. It is so cool hearing that you enjoyed the video. I am going to check out your vids right now.
@okieninety76132 ай бұрын
Facts
@DanO33884 ай бұрын
Subaru says to change crush washer every time.
@fixitwithbeer24354 ай бұрын
Probably a good idea. I tend to reuse them once or twice. Never been an issue. Thanks for watching.
@mattdjmorris4 ай бұрын
Can you please help me figure out which way the crush washer goes on or does it matter? One side is smooth, the other is rounded. Thanks!
@enricoderojassarson55964 ай бұрын
Why did you mention crush washer on oil drain plug? Mine has a rubber o-ring
@fixitwithbeer24354 ай бұрын
Interesting. Mine is definitely not an o ring, but I will definitely double check it next time I change the oil and let you know.
@717273mopar5 ай бұрын
I installed one of these EZ-106(14mm-1.5) EZ Oil Drain Valve with removable Hose End. even easier oil change.
@fixitwithbeer24354 ай бұрын
Thanks for watching. I am going to have to check out this EZ valve.
@Barnabas945 ай бұрын
Best Video on the Internet bar none
@fixitwithbeer24355 ай бұрын
That is very nice. Thanks very much for the compliment and thanks for watching.
@rayro4815 ай бұрын
Great call on the WiX XP and the Kirkland 0w20. Been using the Kirkland motor oil on all my cars for the last 5 years with no issues. Also great idea on the boards as ramps. Cheap and effective. Thanks!!
@fixitwithbeer24355 ай бұрын
Thanks for watching!!!
@treborg7775 ай бұрын
New crush washer on drain plug?
@fixitwithbeer24355 ай бұрын
Most oil drain plugs have a washer on them that the manufacturer would tell you to replace at each oil change to prevent leaks. I rarely replace them and don’t have problems. Thanks for watching!!
@treborg7775 ай бұрын
@@fixitwithbeer2435 Aluminum washers allow a few reuses, but copper ones work-harden & can crack if reused. Replacing the crush washer is cheap insurance in general.
@fixitwithbeer24354 ай бұрын
Thanks for the info.
@wolleyreikivalley5 ай бұрын
wix xp is worse than normal wix, lower micron
@fixitwithbeer24355 ай бұрын
I figured XP was the better one. It was more expensive than the regular which they out of stock. Thanks for watching.
@m3rdpwr5 ай бұрын
I just bought an Outback touring XT. The dealer includes the first two oil changes which includes a tire rotation as well. They charge typically $100. So I guess according to them I saved $200. I only put about 3 to 5,000 mi per year on the vehicle, so it'll be a while before I need to pay for my own oil change or change it myself if I feel like it.
@fixitwithbeer24355 ай бұрын
I love a couple free oil changes at the end of the car negotiations. Good for you! Enjoy your outback. We love our Subaru. Thanks for watching.
@richardcranium55325 ай бұрын
I have a 2017 Subaru 2.5 Ltr. If I run MobilOne in it, my preferred brand for a long time, it will use a quart of oil in about 4.5K miles. I went to Castrol Edge and it only uses about 3/4 of a quart in 6K, when I change it. Same viscosity, 0w-20. I put a quick change oil valve in place of the drain plug. I can reach in with one arm from the front of the vehicle and stab the hose on it, the put the hose into the drain bucket. Flip the valve handle, it has a safety detente, and it drains while I remove the filter and change that. That oil valve was the best thing I have purchased in awhile.