hai , im interest with bd380. it should be use with charger (d200neo or t1000) or can use by selt like bd 250, thx
@skyrcshow8 күн бұрын
BD380 can be used independently as well as in conjunction with T1000/D200. It combines the functionality of BD250 and BD350 simultaneously.
@beman8724 күн бұрын
What type of connector do I need to use the main charging port?
@skyrcshowКүн бұрын
XT60
@beman8729 күн бұрын
Can this charger charge lipos in storage mode?
@skyrcshow25 күн бұрын
yes, it supports Lipos in storage mode, thank you!
@MaxxPainII29 күн бұрын
Mine arrived finally. Works great by itself or with my T1000 and PC.
@skyrcshow25 күн бұрын
Great~thanks for your support!
@LifeDeLiciousАй бұрын
Hi! You need to update the manual pdf you have on website! In the manual it does not say to hold the '+' and '-' buttons when plugging in the usb cable. I was very confused until I found this video where it says i have to hold the buttons when plugging in :)
@Uboot2004Ай бұрын
I bought the device BD380 and no PC connection works with the software charger master V1.30 oder DisCharger V1.09 . The app crashes all the time, only a firmware update seems to have worked. The software urgently needs to be improved. With the Hitec app it works (but not perfect, a bit better), how poor. Furthermore, the device does not display any graphics or a discharge curve. Don´t buy it !!!
@malder8505Ай бұрын
It will show graphics only after connecting the device to a computer and installing the program on a computer from sky rc.
@ShangweiZhang2 ай бұрын
This should be good for my battery!
@shawntong615924 күн бұрын
hahaha
@mikeshobbiesandrandomstuff2 ай бұрын
Cool but the bump go on the D200neo+ seems better
@IOSALive2 ай бұрын
SkyRC, You're the best! I subscribed because I love your content!
@zhutoumeng2 ай бұрын
Glad to know!
@sebseb-cw6bl2 ай бұрын
Thank you for this helpfull video. So, will you update firmware and manual for the D200neo too? It should be very usefull for many users.
@mikeshobbiesandrandomstuff3 ай бұрын
Guess we aren't getting this in the USA 😢
@skyrcshow3 ай бұрын
Dear Sir, thank you for your attention. D200neo+ will be available in the US within this month.
@mikeshobbiesandrandomstuff3 ай бұрын
@@skyrcshow awesome thank you.
@GAMEOFFLINE-fv7rm3 ай бұрын
How do I turn on its logo when I plug it in?
@GAMEOFFLINE-fv7rm3 ай бұрын
How do I turn on its logo when I plug it in?
@GAMEOFFLINE-fv7rm3 ай бұрын
How do I turn on its logo when I plug it in?
@glennmathias18053 ай бұрын
Just bought one. Even after watching many videos, I cannot get it to calibrate. I have contacted both Sky RC and Go Nitro Hobbies. Hopefully, they can get help.
@piensnicolas89114 ай бұрын
1/5 compatible ?
@skyrcshow3 ай бұрын
sorry it only supports 1/10 and 1/8, thank you!
@user-oj1sq2qu1i4 ай бұрын
Hello. Is it possible to connect a 12-24 Volt solar panel to this gadget and can I charge a car lead-acid battery ?
@andrewosullivan89923 ай бұрын
With my b6 neo, it works great charging from one lead acid to another, so solar panel to battery should work identically, as long as the solar panel's output is DC.
@mikeshobbiesandrandomstuff4 ай бұрын
When will this be available?
@skyrcshow3 ай бұрын
Dear Sir, thank you for your attention. D200neo+ will be available in the US within this month.
@doingnumber24 ай бұрын
Can it power SKYRC tire warmer?
@skyrcshow4 ай бұрын
Thanks for your information, S100 as DC power supply is compatible with the tire warmer, as it meets the voltage output requirement of 11V to 18V.
@promay10265 ай бұрын
B6AC neo How to update software?
@mountaineering61085 ай бұрын
Какая цена будет у этого зарядного устройства?
@sergiub40135 ай бұрын
57 euro
@OlegShevtsov5125 ай бұрын
Mine says "C11" in red rather than success. Is it expected? What does this error mean?
@eyeflytinkerings4 ай бұрын
I do have the same issue... @skyrc please help
@OlegShevtsov5124 ай бұрын
I charged the battery and then did calibration - worked better, without errors.
@eyeflytinkerings4 ай бұрын
@@OlegShevtsov512 thank you so much - this did the trick, was able to safe now!
@lanceboyle_megarace5 ай бұрын
Thank god for the front pork suspension
@Co4l5 ай бұрын
It sucks. It has no warranty in the US. Channel B stopped working after 10-15 charging cycles.
@mountaineering61085 ай бұрын
Сделайте точное измерение тока и напряжение для любого количества аккумуляторов (1s-6s)! Ваши устройства становятся удобными, но они не точные!
@spfau6 ай бұрын
Hello, since the update to firmware 1.74 of the skyrc b6 neo pd it is no longer possible to activate the cell calibration interface. Can you give us a solution please?
@spfau6 ай бұрын
Excuse me in 6s it's OK mea culpa
@lunazhang68706 ай бұрын
@@spfau We would like to thank you for your support. SKYRC is always committed to providing the best experience to our customers.
@spfau6 ай бұрын
Hello, since the update to firmware 1.74 it is no longer possible to activate the cell calibration interface. Can you give us a solution please?
@spfau6 ай бұрын
Excuse me in 6s it's OK mea culpa
@lunazhang68706 ай бұрын
@@spfau We would like to thank you for your support. SKYRC is always committed to providing the best experience to our customers.
@GAMEOFFLINE-fv7rm3 ай бұрын
@@spfauHow do you get to the calibration section? I can't get in either
@stelios7776 ай бұрын
Hi! Did you consider the fan problems the B6neo had during the designing process of the B6ac neo?
@TC-ut1tw5 ай бұрын
I'm interested to know this too. Please respond to this question.
@harshlalwani43115 ай бұрын
From the pictures of it, looks like it has a new fan placement. It also can discharge faster according to the specs so I’m guessing “yes”.
@TC-ut1tw5 ай бұрын
good eye, I noticed the fan placement but didn't note the increased discharge value. It might be just because it has a bigger case, but I think it would need a bigger fan to cool the AC/DC power supply.Hope this one is more reliable. @@harshlalwani4311
@novisfpv4 ай бұрын
am interested to know too,
@DogflyFilm6 ай бұрын
bluetooth connect is game changer ! d6 pro shit wheels very bother me to use
@andrewosullivan89926 ай бұрын
Works great for me! What changes were made in the latest update?
@FPSRCDRIFT6 ай бұрын
Merry Christmas 🤶
@reddyairfpv6 ай бұрын
Good light weight chargers after imax old series. Buyed two differents as in video. Crhistmas version very fun.
@shaneskillzrepresent6 ай бұрын
@skyRC why do we need to connect a 6S battery? this is a pain as I dont have any 6S batteries i only use 3s and 4s!
@lunazhang68706 ай бұрын
The reason for using 6S batteries is to ensure the correct voltage matching between the battery and the charger. This helps to optimize the charging process and ensures the safety and performance of the battery
@ElectricRCAircraftGuy6 ай бұрын
Note that your B6neo charger has major issues. A ton of them are dying for people. I'm getting the "Connection Break!" error now permanently and I haven't even done a single full charge on the brand new unit yet. I've seen others with this issue or broken fans on up to 4 out of 5 B6neo units they own.
@ElectricRCAircraftGuy6 ай бұрын
Please add support for this to run in a Windows virtual machine in VirtualBox in Linux. I was unable to get the USB HID interface to the charger forwarded from the Linux host to the Windows VM, even though I've successfully gotten this to work on other devices like the Mobius Camera. Or, better yet: just provide a native Linux tool as well.
@dakodapowell97157 ай бұрын
I would buy this with caution. The one I purchased immediately failed calibration and nothing I tried would fix this. After looking online, I found that other were having the same problem. Some people posted on Skyrc’s KZfaq channel and their version of support to fix the problem was to copy and paste instructions from the manual. I mean who could’ve figured that one out? If you have $200 to throw at a paperweight it does look cool though.
@sotnyk7 ай бұрын
With Charge master v1.24 it is stuck on Firmware screen and shuts down automatically before I can press Checking For New Version button
@@meiki2490 "In the Windows regional settings change the decimal symbol from a comma (,) to a dot (.). It worked for me"
@asengsi6 ай бұрын
@@meiki2490 I'm waiting for new version of the charge master,with this version i don't have any luck :(
@mountaineering61087 ай бұрын
Молодцы что добавили калибровку напряжения! 👍
@lunazhang68706 ай бұрын
Мы хотели бы поблагодарить вас за вашу поддержку. Компания SKYRC всегда стремится предоставлять своим клиентам лучший опыт, и ваша поддержка имеет для нас большое значение
@Mr200gramm5 ай бұрын
@@lunazhang6870 Зачем пост удалили. Я же просто попросил инструкцию по калибровке напряжений у Q200neo Charger
@rafs_tamiya7 ай бұрын
does it support NiMH balance charging
@skyrcshow7 ай бұрын
Dear Sir, thanks for your message, NiMH batteries do not have a balancing line and, as a result, they are not compatible with balance charging methods. NiMH batteries have a different charging characteristic compared to other battery chemistries, such as lithium-ion batteries. They require a constant current and voltage charging approach, which does not involve balancing the individual cell voltages.
@rafs_tamiya7 ай бұрын
@@skyrcshow Im planning to use it on mini 4wd cars so if I series 6pcs nimh AA battery can I connect the balance port to balance them
@MrBosco557 ай бұрын
How do you pair the SkyRC Q200 Neo to your phone ???
@Co4l5 ай бұрын
Bluetooth
@BigAndy80sGen7 ай бұрын
Maybe just do a better job of gluing your tires on.. Can't believe they've brought a machine out to tell you where to stick some putty 😂😂😂😂.. Absolute waste of money..
@skyrcshow7 ай бұрын
thanks for your feedback, tire balancing is critically important from a safety perspective!
@BigAndy80sGen7 ай бұрын
What an absolute useless piece of shit.... It rotates just to tell you your tire isn't right. Derrr
@chequeredflagracing7 ай бұрын
1. What's the max amp charge current on each port when using the UK mains 240v input? 2. What's the max amp charge current on each port when using the DC as a power source? 3. Does it work with the D350 discharge bank?
@leifnilsson44698 ай бұрын
I bought this charger since it is indicated to be supported by the Charge Master PC program. That is true but the Battery Analyze functionality of the Charge Master Software allowing download of data does not seem to be enabled/supported for the Q200neo ??? (which was the main incentive for buying the charger ....)
@kava-saki4 ай бұрын
And how does the software work with this charger? Are there any problems?
@krailertf8 ай бұрын
Will this work with truggy tires?
@2424gold8 ай бұрын
Mine will not calibrate. Why is that?
@skyrcshow7 ай бұрын
Cautions: RTB001 is a high-precision instrument. Before use, pay attention to the following guidelines to ensure the optimal performance and longevity of the RTB001 instrument. 1. Avoid exerting force on the protruding part of the motor shaft in any direction, even when installing the adaptors and tires. Forcing it may lead to damage to the internal sensor. 2. Ensure that the operating surface is stable and free from vibrations. Ideally, place the instrument on a firm and level surface. 3. Maintain a moderate airflow around the instrument and avoid exposing it directly to large objects such as air conditioners or fans. 4. During usage, transportation, and storage, take precautions to prevent the instrument from falling or being subjected to excessive vibrations. 5. When the instrument is not in use, kindly remove the tire from the adaptor and disconnect the power supply. 6. It is strictly prohibited to touch the tire or forcibly stop the motor during detection rotation, as this may cause damage to the motor and sensor.
@dakodapowell97157 ай бұрын
Man who would’ve thought to read the manual when there is an issue. Copy in paste from the manual is definitely the best form of support I have ever seen before what a joke.
@JustInTime05259 ай бұрын
Does it have different S battery protection even after charging has started? A charger fried because of plugging into the wrong lipo after charging has started, hope yours have this kind of protection.
@JS-vh4yq9 ай бұрын
It doesn't appear to balance F1 tires. This is a huge disappointment.
@brunomartins67419 ай бұрын
Why did you delete my comment? No problem, I'll comment again! I've been waiting for this from SKYRC for a long time. Thank you very much!!! When will we have it on the market? Apparently only AMAIN has it available for pre-order. When will it be available on Aliexpress?
@brunomartins67419 ай бұрын
Why did you delete my comment? No problem, I'll comment again! I've been waiting for this from SKYRC for a long time. Thank you very much!!! When will we have it on the market? Apparently only AMAIN has it available for pre-order. When will it be available on Aliexpress?