Please tell me you are going to produce more of these? am not on FB. I love the design and the performance is really elegant. I know it must be good as I've done some simple FWD conversions and they all run really well with just 55/45 FR weight distribution, so your car must be epic. Love the details like the adjustable rear toe angles.
@exorc6837Ай бұрын
Hi, Thank you for your feedback. I am updating the design. The global limit is 300 units. A pre-order event will be held before the shipping date is confirmed. I hope everyone can get the kit before Christmas. If you do not use Facebook, please follow me e-shop. Link below. Thank you again! exorcdesign.com/
@thinkininkyАй бұрын
Where did you buy that body . I need one
@RCDEPENDANT2 ай бұрын
Looks like the track would be more suitable for 1/18
@Ricco932 ай бұрын
You don't glued the tires ???
@exorc68372 ай бұрын
Because this video only demonstrates how to use the rim, there is no gluing.But be sure to glued before running.Hope you like.Thank you.
@lienliam73222 ай бұрын
👍👍👍
@RC_Vulf2 ай бұрын
210 base cool!
@exorc68372 ай бұрын
Thank you
@user-nv1fi5xe1l2 ай бұрын
👍🏆👍🏆👍🏆
@George0909742 ай бұрын
Where can one find which ball dif a specific model uses?
@exorc68372 ай бұрын
Do you mean #53070?
@FastToysClub3 ай бұрын
The driver is way better than anyone else. Makes much more difference than a new car…
@exorc68373 ай бұрын
Thank you for feedback😊
@laserbeam16203 ай бұрын
This song is killer! What turn motor is in this? It's very fast
@exorc6837Ай бұрын
This is 13.5T open. There are related settings at the end of the video. Thank you for watching.
@1980VINZ3 ай бұрын
Absolute mechanical beauty. 🫡
@exorc68373 ай бұрын
Thank you 😄
@jram42713 ай бұрын
Music, unbearable!
@adrianramos26893 ай бұрын
When is going to be available ?
@exorc68373 ай бұрын
Hi, it is expected to be shipped in the third quarter today. There will be a pre-order activity before the shipping date is confirmed. Please continue to follow my Facebook. Thank you very much!
@kenlittle42034 ай бұрын
That thing looks great with the Madcap body on it and the livery is perfect. The Topforce body was always horrible looking, but now suddenly I want one. Great job on the build!
@exorc68374 ай бұрын
Thank you for watching and feedback.🥲
@user-bp8gm4ow8u4 ай бұрын
スゲェ、、、最新のTD2より断然こっち🎉
@exorc68374 ай бұрын
Thank you for watching and feedback.
@TheAndyMaan4 ай бұрын
Well i think that demostrated that its oerfectly capable of keeping up with modern buggies with a competent driver. With the added bonus that it looks much nicer, great stuff 👍
@exorc68374 ай бұрын
Thank you for watching and feedback.
@user-nv1fi5xe1l4 ай бұрын
👍👍👍
@aviano724 ай бұрын
It looks great. I bought the classic conversion kit from RC Mart. I just wish i could find some shocks you use in this video but it is so hard to find
@exorc68374 ай бұрын
Thanks for your support! You can also use AE big bore shocks.
@vivotw17874 ай бұрын
其實不用去翻,膠水自己會滲進去的
@gronkvbs27955 ай бұрын
Nice driving. The tail looked a bit happy. I think just a bit more damping on the rear and she'd settle down.
@exorc68375 ай бұрын
Yeah, as you said... you are a professional. I think your driving skills must be very good.Thank you for watching.🥲
@gronkvbs27955 ай бұрын
Haha. If by professional you mean I had to pay alot of money to drive toy cars over the last 40 years then yes, I'm a professional. 😂 I've turned a few laps in my day but never got paid for them.
@exorc68375 ай бұрын
@@gronkvbs2795 haha. Let’s enjoy the RC world happily together ha😁
@manofsteele605 ай бұрын
The Madcap body really works well.
@exorc68375 ай бұрын
Thank you😊
@jonnycatt1385 ай бұрын
What size tooth pinion? Also were did u get the narrow front wheels in 8 hole? I can not find those
@exorc68375 ай бұрын
Hi, my pinion is 25T and the rim is 2.2 inches. My friend bought it for me. It seems to be from the UK. Please look for it again. Thank you for watching.
@calvin1mac6 ай бұрын
Great video, love your work. I love how many people are working to make the top force /manta ray even better than the original. It does make me wonder though. How come nobody has come up with a slipper clutch so far??
@exorc68376 ай бұрын
Because of the design of the Top Force gearbox, if you want to design a slipper clutch, you must destroy the gearbox. This is difficult for most consumers.Thank you for watch.☺
@calvin1mac6 ай бұрын
Ok but if you did destroy the gearbox, how would you do it? I’ve often thought the spring and nut would have to go on the motor side of the gearbox.
@cuddzilla6 ай бұрын
That's sweet!
@exorc68376 ай бұрын
Thank you
@user-nv1fi5xe1l6 ай бұрын
👍👍👍
@ks-bg5uk6 ай бұрын
Hi which body will fit this?
@exorc68376 ай бұрын
Hi, This is Kyosho Tomahawk body.
@rccartips6 ай бұрын
Cool track
@exorc68376 ай бұрын
Thank you😊
@jamesstrutt22086 ай бұрын
Hi, where are you based? Do you ship to the UK? Or are there any distributors in the UK? Thanks. And happy new year. 👍
@exorc68376 ай бұрын
Hi, I am in Taiwan. My products can be sent to all over the world. Please feel free to place your order. Happy New Year~😊
@-1-2-1-7 ай бұрын
Do these outdrive cups have more depth than the originals? Standard items are too shallow and limits your ability to change roll centres etc.
@exorc68376 ай бұрын
Same as the original. But it won't fall off like the original one.
@ianmatthews77927 ай бұрын
Sorry, this is probably a really dumb question, but is this compatible with the Kyosho Legendary Series 2WD Ultima Ie. the one with has the battery pack which sticks out each side of the body?
@exorc68377 ай бұрын
This conversion kit is specially designed for Kyosho Legendary Series 2WD Ultima. It only fits Shorty LiPo spec. Hope you liking it.Thank you.
@jonnycatt1387 ай бұрын
There is something so special about a modernized old school car!🔥🔥🔥🔥🔥🔥 u guys crafting is amazing 😎😎😎😎😎
@sanlouis86737 ай бұрын
So sick
@rcaficionado7 ай бұрын
This looks like a really good upgrade. Do you plan on making additional upgrades for the Top Force or any other Tamiya vehicles (like the Egress)?
@exorc68377 ай бұрын
Hi , There are many Top Force upgrade kits in my e-shop, please come and browse. Thank you. Happy New Year! exorcdesign.com/collections/top-force
@RCOnTrack7 ай бұрын
That is an absolutely stunning looking kit! Can´t wait to get mine for the Optima. But then i need to get an Ultima as well i think :)
@exorc68377 ай бұрын
Thank you for your feedback. Happy new year!!
@jonnycatt1387 ай бұрын
Did u use b6 2wd big bores or b74 4wd big bores?
@exorc68377 ай бұрын
Yeah, You are professional 👍
@henrya10527 ай бұрын
Great Job holding it down at the track...the platform is slightly dated but its solid!! I was really impressed and was rooting for you!! A slipper would definitely improve your performance...Great driving skills too!!!
@exorc68377 ай бұрын
Thank you for watching and feedback. Thank you !
@user-tf9qt6gy6e7 ай бұрын
Very exciting film, thanks!! I'm turbo optima mid special lover, so driving the original model still now. Your driving optima mid is really fast, I'm impressed very much. Any way, what wheel is your optima mid wearing? Is that KYOSHO original model for the optima? But that is 2 inch wheel, so I think it does not fit your tire. (Is the tire 2 inch?) Please inform me about your optima mid wearing wheel and tire.
@exorc68377 ай бұрын
I use Shumacher tires. The wheels are 2.2 inch. My friend bought it for me. It seems to be from the UK. In addition, there are related settings at the end of my video. Maybe you can refer to it. Thank you for watching.😊
@user-tf9qt6gy6e7 ай бұрын
I also use Schumacher 2.2 inch tires same as you. Your wheels are form UK!!. The design is almost same as original turbo optima mid SP wheels , so I think I want to use them if I can buy anywhere. Thank you for your replying massage. I really enjoy your videos.
@exorc68377 ай бұрын
@@user-tf9qt6gy6e Thank you for watching 🙏
@-1-2-1-8 ай бұрын
Top force needs more castor, lower axles, stronger crash resistance and a slipper.
@exorc68378 ай бұрын
Yes, everything you mentioned is the key point! But it’s hard to change 😂
@AlvinYuen-xc1vdАй бұрын
Which means a different car. I had the original one in the early 90s and it was fun on the streets, but at the dirt track it just couldn't keep up with 2WD AE, Losi, and Traxxas (TRX3). And the plastic gearbox diff covered cracked often.
@mikeyeh24208 ай бұрын
Nice video first of all. Where’s this race course?
@exorc68378 ай бұрын
Hi Mike, this is A-MU track in Taiwan.
@johntuffy57218 ай бұрын
wow .... $300 + us to polish a turd lol
@philthyco14 ай бұрын
#idiot
@righn34948 ай бұрын
Perfect!
@exorc68378 ай бұрын
Thank you !
@samueltorodeltoro8 ай бұрын
Any updates on this?
@exorc68378 ай бұрын
Thank you for your continued interest in FF buggy. Since the original parts supplier is unwilling to supply parts to me, SSo the gearbox is being redesigned and will not be shipped until around the second quarter of next year. You may have to wait a little longer. I'm sorry.
@samueltorodeltoro8 ай бұрын
@exorc6837 thank you for the update
@exorc68378 ай бұрын
@@samueltorodeltoro Thank you!
@MRF20208 ай бұрын
Do you ship to Japan?
@exorc68378 ай бұрын
Of course! I have sent several sets to Japan. Please go directly to the link below to place an order. Thank you! exorcdesign.com/collections/ultima
@user-st3ou8pw6w8 ай бұрын
Can it also be used for dirt master?
@exorc68378 ай бұрын
Sorry, The conversion kit just for ULTIMA series. Thank you for watching.🙂
@codyskyrimvolen8 ай бұрын
this looks insane!
@finleymakee48509 ай бұрын
Strange but super cool concept. Nice to see innovation
@exorc68378 ай бұрын
Thank you for watching!
@user-oo7sv6dq6p9 ай бұрын
日本でも代理店で販売をお願いします。
@exorc68379 ай бұрын
現在、2社と交渉中です。商品を気に入っていただきありがとうございます。😄
@user-oo7sv6dq6p9 ай бұрын
@@exorc6837 日本語でのお返事ありがとうございました。期待しております♪
@exorc68379 ай бұрын
ありがとう!
@user-oo7sv6dq6p9 ай бұрын
これはJJのライバルになりそう!
@exorc68379 ай бұрын
ご意見ありがとうございます。 気に入ってくれるといいな!
@davidwatson229 ай бұрын
Seen something very much like this back around 2018 ish at a couple of our mid East Midlands Regionals , pretty sure it was 3d printed back than. Very interesting design
@exorc68379 ай бұрын
My car does not use 3D printed parts, it is all made of plastic and metal materials. I hope you like it!😉
@drwedders9 ай бұрын
Nice! The Madcap body suits well. Do you run the front one-way?