Retired Coastie here! Very well done. Thanks for posting!
@JR-zx1le3 ай бұрын
Sizzle CNC do you still have this file I have looked everywhere for it. Thanks for any help, Jeff
@ald.34494 ай бұрын
What 90 v bit do you use?
@americanpatriot-usaf4 ай бұрын
Thanks for the very informative explanation and demonstration of importing STL files into vCarve Pro and creating the toolpaths for carving.
@donjankord15574 ай бұрын
Where can I purchase the CRV file, the link below does not work
@brentncindy90235 ай бұрын
Looks great! Are you using a router or a VFD spindle? Trying to decide if I need to spend the extra $$ on the VFD.
@nannanchueh63306 ай бұрын
very nice teaching and illustrate , it's help me very and very much , Thank You
@ald.34499 ай бұрын
Very fucking cool
@ald.34499 ай бұрын
What depth are you carving ? I'm just learning aspire. Coming from just learning carbide create, big difference!! Would love to see more video of settings toolpaths with aspire
@ald.34499 ай бұрын
Can you do a video more in depth on how you set up your toolpath with the colors. And then your painting process
@ald.34499 ай бұрын
Very nice work. What depth are you carving at
@ald.34499 ай бұрын
Do you sell this files for the sports team flags. And whst depth are you doing your carves
@brunotognazzolo9 ай бұрын
tenes el codigo g de el modelo?
@Ezekiels19 ай бұрын
I want one, only suggestion, silver epoxy.
@bmf572 Жыл бұрын
Fellow CNC’er here and Broncos fan. 🤮 Raiders! 😂
@bmf572 Жыл бұрын
What bits did you use?
@glennhelwigwk8p530 Жыл бұрын
Sorry, this item is unavailable - File is not for sale? Where can I find it? Thank you!
@ald.3449 Жыл бұрын
Question was the bit not carving at one point cause of the wood being uneven. If so, how do you fix that. Im new and im having alot of trouble with that problem. My z is off cause of warp board. Getting no carving or carving to deep in sone areas
@ald.3449 Жыл бұрын
What kind of wood are you using. I'm brand new to cnc. Every piece of wood I use is warp and either the bit doesn't reach or goes to deep. Can't figure out a solution!!
@xpoxydesignz5003 Жыл бұрын
Love this tutorial my guy! Would like to see more of your work with Vcarve as they simple to follow along with being new
@84leafclover Жыл бұрын
Looks awesome, do you sell the file if you do, can i modify the size? Im using a fox alien masutre pro its a 4040 cnc
@peterplantec7911 Жыл бұрын
This was helpful. Thankyou.
@mikeledee8786 Жыл бұрын
Knowing what the dimensions are for the union from the software what is the best way to assure that when you mask off the area to spray that it will align with the cnc measurements? Thanks
@dbarger4826 Жыл бұрын
No tabs on cutout
@patrickellis2626 Жыл бұрын
Actually brother I think it looks really good for your first attempts. If you could solve some of the pitting issue you will be good. Definitely on the right track and you inspired me to try. Thanks (Subscribed)
@rebaker2012 Жыл бұрын
Can this file be purchased. Roy
@aaronswoodshed4103 Жыл бұрын
Shure would be nice if you could speak and dump the music.
@karlriley1314 Жыл бұрын
You're not making any more videos??
@pedrodheming2044 Жыл бұрын
Looks great man what’s the settings on this piece of art. Thank you
@mikehoufek216 Жыл бұрын
have you ever lost detail while converting? I bought a file off etsy and it showed a lot of detail but after carving the detail was not there. Used a very small tapered bit so that was not the issue.
@Sizzle99 Жыл бұрын
It all depends on how you create/adjust the tool paths.
@danieldevite668 Жыл бұрын
I like it
@dannyauck1852 Жыл бұрын
Have you got the file for this
@K2Muzho Жыл бұрын
A couple years ago I gave up on an important project because I couldn’t figure that out. But now I’ve successfully completed the project with your help. Many thanks.
@tomayrscotland6890 Жыл бұрын
I am sure with Practice you will get it okay next time round.
@southernmanC2 жыл бұрын
you should have done some NODE EDITING around the eagle head
@TheKirk482 жыл бұрын
I’ve been looking for this for hours, you’ve done a great job of showing how it’s done.
@rickycurry5742 жыл бұрын
This if off the chain. Im a new subscriber and I look forward to watching all your videos and learning.
@williamtracy42812 жыл бұрын
What bit did you cut the stars with, looks like a pencil? What settings.
@Sbregher2 жыл бұрын
Very cool!
@joshschreib21482 жыл бұрын
This was great, I've got a shopsabre 23 coming in and this has been helpful to get a little idea of what's going to need to happen to make the machine work. For the tool change are you using a ATC or is it manual, and if it's manual how would you setup a manual tool change for that transition from the rough cut to the ball end? I now you gotta edit the Gcode but maybe the Vcarve software has something in there to set up that way.
@calfor76312 жыл бұрын
my issue my image isnt as clear as yours once i get to material setup @11:00 your details are good
@calfor76312 жыл бұрын
any info on how to turn a photo or logo into 3d stl to import to varve
@stanley47472 жыл бұрын
I loved your project I live in Florida now and grew up in Chicago I was a Chicago policeman love the Bears didn’t like the Cubs that much I grew up by Wrigley Field when I was young I would love to get that text files to create the flag
@stanley47472 жыл бұрын
Anyway you can give up that Vetric’s file of the flag
@djfamous01302 жыл бұрын
What were the different bits used for this project? looked like you used a v bit for the Eagle Globe and Anchor, switched to a different v bit for the stars, then other bits for words and stripes?
@russellcorcoran22312 жыл бұрын
Are you selling any of the flags with the Eagles ?
@russellcorcoran22312 жыл бұрын
If you are selling how much?
@thecreator14552 жыл бұрын
love your work how deep u cut your stars. thanks
@user-hs9wf3rn6o2 жыл бұрын
great✨✨
@DavidNicolanti2 жыл бұрын
Are your toolpaths for Vectric available anyplace?
@patriotwoodworker60922 жыл бұрын
Did you glue a square piece for the eagle onto the flag body?