Ruger lost there minds when they stoped making them.
@SkullCrushIncКүн бұрын
Perhaps they will do a revival someday.
@deanohitКүн бұрын
A M77 with a classic gloss Leupold simply beautiful
@SkullCrushIncКүн бұрын
Thanks @deanohit This one was a gift from my father. It is a beautiful piece.
@dexternorman62832 күн бұрын
Salute 🫡 awesome video
@SkullCrushInc2 күн бұрын
Thank you sir!
@Ccerastes4 күн бұрын
I have WG P226 that I purchased in the mid-eighties. I just replaced the X-ray sights and now want to upgrade to a SRT. Interestingly, mine has a smooth trigger face. Thanks for the great video!
@SkullCrushInc4 күн бұрын
You're welcome. Thanks for watching!
@BigRoss2468 күн бұрын
Thank you.
@SkullCrushInc8 күн бұрын
@@BigRoss246 you’re welcome!
@woottengames21329 күн бұрын
You made this tutorial so easy!! Thank you for making this video!!! Even a slow learning person like myself was able to figure this out on my first try
@LorenzoHoshi9 күн бұрын
Great video, by chance could you post a link to the brass 9mm rod/brushs and patches used in the video? The bore snake aswell link would also be greatly appreciated!
@SkullCrushInc9 күн бұрын
@@LorenzoHoshi it’s at skullcrush.com
@Anthony_Fraire9 күн бұрын
Definitely the best mossberg 590 cleaning tutorial out. Hands down. 🔥
@AkilMalcolm12 күн бұрын
Appreciate the great video. Just got my Echelon and best believe I will be pulling this up again when it's time to do the first cleaning
@aminortuneup840815 күн бұрын
Is there any risk of wearing away a Cerakote finish over time by cleaning?
@SkullCrushInc15 күн бұрын
@@aminortuneup8408 Never seen that happen.
@grinchstaaa15 күн бұрын
what other liquids can i use to clean it
@RagePrinceOfFire19 күн бұрын
This is the best guide I've found on how to clean the p320. Thanks so much.
@bowieupland611225 күн бұрын
Good info.
@sifisozondo296328 күн бұрын
What do you guys use to clean the FDE color frame to retain the color coz i tried using handy Andy and the dark brown color from my holster won't go away
@SkullCrushInc28 күн бұрын
@@sifisozondo2963 Just regular CLP. Link in the description.
@lobbyrobby29 күн бұрын
Very well done and presented! 👍
@RicardoMachin-hn4hs29 күн бұрын
my glock jams after every shot , glock 34 gen 5, what could it be ? Thanks
@SkullCrushInc29 күн бұрын
@@RicardoMachin-hn4hs Can’t diagnose from here. Send it back to Glock. They’ll fix it.
@RicardoMachin-hn4hs29 күн бұрын
@@SkullCrushInc thank you
@user-qo2jy4zm6zАй бұрын
Excellent guide. Clear and comprehensive. Thanks a lot.
@beatfishАй бұрын
Great job, thanks for posting.
@tannerl5607Ай бұрын
Really well done
@haplo19Ай бұрын
Dude. Great content. In a world of overproduced gun videos where everyone is trying to be John Wick, this clear, informative video is a breath of fresh air.
@diamonda8464Ай бұрын
Thank you for sharing this information it’s very helpful 🙏🏾
@JJ-pi3sjАй бұрын
Thanks for showing the recoil spring attached to the barrel correctly. I noticed my friend had hers upside-down.
@Drum_x_LifeАй бұрын
Question: is it good to remove the old lubrificant before starting cleaning external parts?
@SkullCrushIncАй бұрын
@@Drum_x_Life The old lube is going to come out when you clean it with fresh CLP.
@Drum_x_LifeАй бұрын
@@SkullCrushInc thank u so much 👍♥️
@shailendrapradhan5420Ай бұрын
Thank you for this very good and clear demonstration.
@rtep5Ай бұрын
If you're going behind the extractor with the clp'ed brush, surely there is clp spraying the breach face and the firing pin hole?
@jackmorrison4059Ай бұрын
So I just got this gun and I just followed your tutorial. I did everything that you showed but when it came time to reassemble, after sliding it back the takedown lever did not snap into place
@SkullCrushIncАй бұрын
Hard to diagnose with out seeing it. Take it to your local gun shop and have them take a look.
@eliran6645Ай бұрын
Tnx. Helo me a lot❤
@TheRealDrummerDudeАй бұрын
Not just informative, but your narrative skills are stellar. No ra-ra, macho BS, just straight to the point, like I tried to speak to enlisted recruits in the MC. Thank you.
@SkullCrushIncАй бұрын
Thank you!
@stenmoellerАй бұрын
The EDC X9 is a brilliant gun, and there is plenty of fine info here for those who do not yet know it, but as an accuracy test, 10 yards and hand held with no support doesn't help. The results here are down to your good shooting, but the gun itself is a lot more accurate than this. I wouldn't go for anything less than 25 yards with Ransom Rest, or at least supported. That said, you do shot very well.
@jasonedwards9897Ай бұрын
Perfect for me as a newbie. Thank you
@SkullCrushIncАй бұрын
@@jasonedwards9897 You’re welcome!
@cchagan08Ай бұрын
Nice and straightforward, easy and fast, thanks man 🤙🤙
@SkullCrushIncАй бұрын
@@cchagan08 Thank you
@BobRhodes-pl6ciАй бұрын
Really good job. Thank you!
@SkullCrushIncАй бұрын
Thank you
@dwcannon1Ай бұрын
Clear, concise, consistent and efficient instructions. The reviewer is well spoken and easy to follow and understand. Thank you.
@SuperGregoreАй бұрын
Great video, my shotgun is being shipped, first thing I will do it take it apart and clean it as per your video. Thanks
@SkullCrushIncАй бұрын
Congratulations! 👍
@imdrrich2 ай бұрын
Is there a reason why the barrel wasn't cleaned with a wire brush and only a couple of patches?
@SkullCrushIncАй бұрын
It was. You must have missed part of the video.
@toddrarick72752 ай бұрын
I watch beginner videos for all weapons I've never personally handled. Like the slide release config. Beats the idiot scratch method on a-1s.
@leebeeguy142 ай бұрын
Awesome video, felt comfortable field stripping for the first time. Straightforward video.
@SkullCrushInc2 ай бұрын
Thank you!
@danielnixon15702 ай бұрын
WOW, that was amazing! Thank You
@SkullCrushInc2 ай бұрын
Thank you!
@Bigkwan12202 ай бұрын
Great video great information. Great cuts. Better than some overproduced videos where you’re looking at some pretty boy trying to look cool shooting.
@SkullCrushInc2 ай бұрын
Thanks @Bigkwan1220
@ALb3RtO10102 ай бұрын
Great video! Thank you. 😃👍
@SkullCrushInc2 ай бұрын
Thank you!
@techiemarksman2 ай бұрын
Thank you for making this video.
@SkullCrushInc2 ай бұрын
You’re welcome!
@xanderminne96502 ай бұрын
Great video for a beginner like me
@FizzRefined2 ай бұрын
Big Thanks! First time owner and couldn’t tell you which supply was for which.
@matthewjames26492 ай бұрын
TY4SHARING!
@jpg_sig102 ай бұрын
My UID sticker fell off.
@sunglee20482 ай бұрын
Just cleaned my new PDP Pro. Well made and explained. Thanks!
@hellopinkham2 ай бұрын
I appreciate absolutely everything about this video. Very very detailed
@hellopinkham2 ай бұрын
I appreciate the amount of advocacy for safety in this video.