Would you tell the name of the white sheet you have used on the walls, please? Does it make the walls damp and moisture proof?
@trollmanrs12 сағат бұрын
On the outside I installed a product called Tyvek, this is a breatherable membrane. Other brands are available but this is probably the most well known brand. Hope that answers your question?
@martingilliganКүн бұрын
Good video mate. Thanks
@trollmanrs23 сағат бұрын
Glad you enjoyed it Martin, and thanks for leaving a commant.
@AlexVangeenRacingКүн бұрын
I was very sceptical of this one, but worked a treat!!
@trollmanrsКүн бұрын
Glad to hear it :-)
@hairstonwilliams27702 күн бұрын
Excellent! The D2 wipers are pricey here in the US. If its cheaper, ill certainly be doing this to my disco, as the blades are separating from the metal 😅.
@trollmanrs2 күн бұрын
yup and you can use the euro flat blades which are miles better. Mine are great now and actually touch the screen.
@craiganavi5 күн бұрын
Very informative and exactly what i was looking for. Quick question - My blue&me module has stopped working and unfortunately is now draining the battery (my aux connector still works). Out of interest was your aux connection working after you had removed the blue&me module?
@trollmanrs4 күн бұрын
Hi, yes the aux still works. My B&M never worked, so I removed it and did a proxy alignment to get rid of the "flashing mileage". Then installed this device. If you leave it in it will keep draining your battery. Good luck.
@jondavies759313 күн бұрын
Thank you for posting this - it's a great help!
@trollmanrs13 күн бұрын
Happy to of helped.
@nitroxize19 күн бұрын
So my air filter has fallen off. I didn’t clamp is down properly it seems. Did you put a bigger clam between the pipe and the air filter??
@trollmanrs18 күн бұрын
My kit came with bigger clamp, and also a bracket to support the cone, so it couldn't "fall off". oops
@nitroxize17 күн бұрын
@@trollmanrs lucky and smart you. I’ve recently had the fortune of my air filter falling off hahahahha so trying to figure out how to fix this. But good to know
@georgesrossignol20 күн бұрын
Thank you. But, why didn' t you put green led ?
@trollmanrs19 күн бұрын
Because I like blue LED :-)
@charlesrowe8137Ай бұрын
Thanks so much, I've been through it with mine and steering and suspension calibration are so important. IID Tool (expensive but will save in long run!)
@trollmanrsАй бұрын
Agree the IID tool is a very good investment, and to be honest when you sell your Discovery 3 you can sell the IID tool for not a lot less than new prices.
@l3droidАй бұрын
Brilliant! Tyvm
@trollmanrsАй бұрын
Glad it helped.
@sleepycatpictures1176Ай бұрын
Good effort. Meyle is good stuff. I did my front ones. After fitting the new links, I greased the exposed thread and slipped a length of rubber hosepipe over it. The idea being the threads should not be rusty next time . . . Hopefully!
@trollmanrsАй бұрын
Great tip, i cover everything in copperease, as it will probably be me taking them off again lol
@m1cxfАй бұрын
Good to see I am not the only person who replaces things in pairs. Lets face it, both sides have done the same mileage and suffered the same abuse. You see so many people only replacing one thing because only one has worn out.
@trollmanrsАй бұрын
Totally agree, I replaced a pair of rear air stuts on my Disco 3 recently but only 1 failed. I'll replace the front ones soon too, it's all about preventative maintenance.
@lemagreengreenАй бұрын
I had an idea of a syringe that you could just screw on to the nozzle when the sealant is still wet and force it out, then you could put the nozzle back on completely empty. I sorta assumed a product like this must already exist though, I know the real solution is just have lots of spare nozzles though.
@trollmanrsАй бұрын
That sounds like a good plan. I see people are selling 3D printed nozzles now.
@chrisluff7088Ай бұрын
great vid now i need to see how you fit it back up
@trollmanrsАй бұрын
Thanks, sorry I bought a new head in the end and sold this one for spares, so no follow up video I'm afraid !!
@rogiernАй бұрын
Thanks, very useful instruction. If you don't know about hidden bolts and nuts behind foam and flaps it can take ages to do such a job.
@trollmanrsАй бұрын
Ain't that the truth, and that's why I make these kind of video's. Glad you found it helpful.
@RECKLESSMELANCHOLYАй бұрын
Finishing my headlights off now, great video, just one question, i didn’t want to go with HIDs so i got some NightEye LED H1s but they only have one connector on the back and the plug for the dipped beam has 2, cheers
@trollmanrsАй бұрын
For dip/main you need H7's. I pretty sure the facelift light main beam only (the lower bulb) is H1.
@pmg7711BlackFireАй бұрын
You are a genius. Thank u
@trollmanrsАй бұрын
Glad it helped
@JohnknowsstuffАй бұрын
Best video I've seen. Good camera and audio. New sub.
@trollmanrsАй бұрын
Thanks for the sub!
@joco1223Ай бұрын
Hey bud , having the same issue , would you share the link or cheaper part number to get it ? Thanks for the great video and not letting me rip off the whole plastic parts from the back !!!
@trollmanrsАй бұрын
Hi, tha part number is in the video, just put it into ebay. Or search for Fiesta mk7 parking speaker.
@joco1223Ай бұрын
@@trollmanrs i got a 50 omhs speaker relatively same size as the original one for 5 euro and connected it and works like magic :)
@hallga2Ай бұрын
greta vid, very clear!
@trollmanrsАй бұрын
Thanks for the comment, glad you enjoyed the video
@MrRepublicking2 ай бұрын
Thank you very much for a helpful video, hardly any full tutorial on this matter. I fixed mine with the Multiecuscan App for iPhone 👍 100% working solution, the only downside costed £60 for a year license when only need it once; On top of the OBDLink MX + OBD2 device (£150] and the yellow cable. Probably works with cheaper OBDLink models but I dunno, I brought one that people seem to confirm it works.
@MarkCheetham-nk5xu2 ай бұрын
Hi Mate, love the video. HELP re my car is needed. I'm in Perth Australia. I've got a 07 RR Sport. WITH and intermittent fault re the center console stuff and other items. Its doing my head in.............. So, I start the car, the radio works, Sat Nav and AC all work. Indicators all work. Then 3-4 or 10 minutes later, a fault comes up on the dash and the lot shuts down, NO Aircon, No Radio, No SatNav, Indicators stop working and Hazard light start flashing plus the central locking on the doors start opening and closing! Car drives normal. 3-5-10 minutes later it all switch's back on and works again as normal. THEN 5 mins later OFF again. No idea what it is................ HELP pls Thx Mark
@trollmanrs2 ай бұрын
Hi Mark, There is a known problem with the instument cluster (dash) on D3 and RRS, as this is part of the CANBus it throws a load of errors up. Have a google as they may be your issue ? cheers Mark
@timpayne25712 ай бұрын
What Autel ODB scanner are you using? None of my cheap ones let me know which specific sensor is dead.
@trollmanrs2 ай бұрын
Hi, I use a an Autel AP200, about £60 from Amazon HTH, Mark
@7qim2 ай бұрын
Where is the link to the original source of the files??
@trollmanrs2 ай бұрын
In the description is a link to my Dropbox
@7qim2 ай бұрын
@@trollmanrs No. Where is the link to the place where you downloaded the files?
@trollmanrs2 ай бұрын
@@7qim It's a nightmare to find, had to install a russian whatsapp. Took ages to find
@7qim2 ай бұрын
@@trollmanrs 'Took ages to find" sounds like a good reason to provide a link to such a rare and rich source )))
@trollmanrs2 ай бұрын
@@7qim It's within the app, so unless you had the app it's pointless.
@tonynewman85862 ай бұрын
It’s a nice job in the Sumer / just clean the frames / masking tape can of primer and a can of the finished colour - £20-30 a window Costs/ it’s just labour intensive / the only real work is putting the masking tape on / you couid do a standard size house for £500 max in 2-4 days at your own leisure 👍
@trollmanrs2 ай бұрын
very true.
@wizzywilson2 ай бұрын
The seal has to go on dry right? no oil or lube?
@ronaldrrootiii60402 ай бұрын
Are the bolts 3/8-24 by 1in? I read 1.25 online but in real life if you use that length you can't put the round end of the wrench only the open end as it becomes to close to the front diff housing
@trollmanrs2 ай бұрын
Hi, The bolt head is 9/16, and prob about an inch long. I actually had to change this prop again a few weeks ago as one of the front UJ's was shot. Good job I had a video to remind me what to do lol.
@PetecServices-us3rd2 ай бұрын
Yoj got anything on how to do a hard reset of the ecu?
@trollmanrs2 ай бұрын
No sorry, I don't own a Freelander, the key was for my Father in Law.
@PetecServices-us3rd2 ай бұрын
Thanks bro saved me a trip to the locksmith
@trollmanrs2 ай бұрын
Glad I could help
@jamesmacdonnell40852 ай бұрын
I am able to take care of the tapered dispensing end, my problem is the plunger end of the tube. Any know how to loosen the plunger end of the tube? Pressing the trigger of the caulking gun does not work. Happened to 4 different tubes of 1st quality GE silicone caulking tubes, only half used. Anyone have a suggestion? Thanks in advance. Jim
@johnhall84553 ай бұрын
Excellent video thanks simple but thorough
@trollmanrs3 ай бұрын
Glad it was helpful!
@landroverman793 ай бұрын
How much and were did you ger the arms from, the price for the arms vary so much!
@trollmanrs3 ай бұрын
Hi, I just found a pr on ebay, cheapest I could find was about £20 but that was a few years ago. I rubbed them down and painted them with some black gloss.
@lukemagee4623 ай бұрын
Are you able to open the other window of the tent? Ive fitted my awning too close so i cant get rhe poles in😅
@trollmanrs3 ай бұрын
Hi, your right the awning is in the way where the poles go to keep the window open, but we moved the tent back a bit on the roof rack now and can just get the poles in.
@angelescuv3 ай бұрын
Hi friend, removing the batery (old one) and repleace it with a high amp one will also make te Odometer flash? blue&me isue? I have that isue on a 159 that i whant to buy....& The saler said that is from when he change the battery! None before that!? Tnx
@trollmanrs3 ай бұрын
Hi, to be honest I believe if you change some devices you need to perform a proxy alignment to stop the mileage flashing. Not sure on a battery though !
@shaqfraser78673 ай бұрын
My rear parking sensors show on the dash, distance control, however there is no sound at all i even took it bumper to bumper with my mrs car. Is this a fault or a setting? The fronts love going off all the time, so they work fine.
@trollmanrs3 ай бұрын
Hi, good question, not sure if there are 2 different sounders, one front & one rear. I know my Landrover has 2 so that might be the issue. A faulty rear sounder.
@mecanico7513 ай бұрын
Hello good morning, i would like to mount that steering wheel but with automátic paddle shifters on my D3. It would work for me with those new modules and where i can buy them. I look forward to a response thank you.
@trollmanrs3 ай бұрын
Hi, the link to Facebook market place advert is in the desciption above.
@tonisantos79113 ай бұрын
@@trollmanrs Hello good afternoon, yes the link is there but no one answers me on that link
@trollmanrs3 ай бұрын
@@tonisantos7911 sorry beyond my control.
@tonisantos79113 ай бұрын
@@trollmanrs Good morning, by any chance you don't have the code or reference number that it says on the PCB? To be able to search for it elsewhere
@gustavoaramirez96733 ай бұрын
Awesome. Thank you
@trollmanrs3 ай бұрын
You are welcome!
@mecanico7513 ай бұрын
Hola buenas noches quisiera montar ese volante pero con levas de cambio automático, me funcionaria con esos módulos nuevos? Donde los puedes comprar?
@trollmanrs3 ай бұрын
Hi, I believe a company called BlackBox solutions have the PCB's for the heated steering wheel along with add ons for ACC, & paddle shift.
@tonisantos79113 ай бұрын
@@trollmanrs Thank you very much, I look at it to see how it turned out.
@mecanico7512 ай бұрын
@@trollmanrs hola buenas tardes a ver si me puedes ayudar, ya he montado el volante LR4 en mi RRS3 con los módulos nuevos comprados donde me dijiste pero tengo un problema, las levas y botones de radio funciona todo bien pero el control Cruiser no me funciona nada y antes con su volante si que me funcionaba bien. Que puedo hacer?
@trollmanrs2 ай бұрын
@@mecanico751 I could be wrong but I read somewhere that with the new pcb's in the D4 wheel the cruise control will never work. I have not tried it tbh, as I hate cruise control. But ping Black box they should know for sure.
@tonisantos79112 ай бұрын
@@trollmanrs Hello, good morning Trollmans. So the steering wheel that you installed, which I see also has the speed control or regulator on the left panel of the steering wheel, doesn't work for you either? With the original steering wheel it worked without problems and no fault was noted when I checked it with the diagnostic machine.
@stephenwren46373 ай бұрын
The cheapest option is check your water level and don't be lasy
@trollmanrs3 ай бұрын
What a dumb ass comment. This mod saved my engine, if you know anything about the D2 TD5 or V8 then you will know that if the temp gauge goes into the reed it is already too late and you have prob cooked your engine. I had a hose go after doing the French alps, I instantly saw when the hose let go and pulled over, the temp gauge was normal still but the header tank was empty !!
@haidermalik34983 ай бұрын
Great tip thanks 😊
@trollmanrs3 ай бұрын
Glad it was helpful!
@tyroo1963 ай бұрын
Hi mate, how is it working after 3 years? Do you still has this Disco with lamps? Regards Krystian
@trollmanrs3 ай бұрын
Hi, yup still working ok, the DRL's have not mised a beat.
@tyroo1963 ай бұрын
@@trollmanrs sounds great and looks 😊 I’ll put it on my list of updates in My Discovery 😅
@JpaatAlbi3 ай бұрын
Bonjour merci pour votre réponse ,vous ne m avez pas répondu ….une batterie AGM ….dure plus longtemps….ou vous êtes avec un ctek branché sur secteur !
@ahmedvorajee24304 ай бұрын
Hi what reg is your Maserati?
@trollmanrs3 ай бұрын
It's a 2011 year.
@JpaatAlbi4 ай бұрын
Merci pour le tuto ,en se me qui concerne j ai un grancabrio ,j ai option parking sensor avant ( un ne fonctionne pas) je verrai avec un autel 200 , par contre aucun de fonctionne Arrière un avis ? Sinon j ai observé une batterie AGM est ce que cela règle le problème de perte Electrique ,? Je perd environ 2 % par jour. Voiture fermée ou pas .merci pour votre retour
@trollmanrs3 ай бұрын
Hi, The Maserati GranTurismo's do suffer from battery drain issues, if not using it for long periods of time then you should use a tbattery conditioner eg Ctek. I have not tried the front parking sensors using the Autel, but i'm guessing it should be the same. My car has had at least 6 new parking sensors in it's life, so they do fail often.
@BruceHaskellEventing4 ай бұрын
Awesome job! What have you put above the garage door opening? Is that 6x4? It looks like you screw another plate onto the back of it
@trollmanrs4 ай бұрын
Hi, thanks for the comment. Above the garage door I put 2 x 8x2's. Have a look at the more detailed video's in my playlist, they may help.
@cristinahahn51654 ай бұрын
💖 Promo_SM
@tino58014 ай бұрын
Have you ever known any issues with debadging? I'm referring to paint damage/fading of colour. I have a seven year old Veloce 1750tbi and thinking of removing the Veloce front wing badges and replacing with Quadrifoglio badges. As this has the same engine and gearbox, thought it would be OK to put these on 😊. Just thinking of its age and potential trouble with paint damage or colour fading. Thanks
@trollmanrs4 ай бұрын
If you worried about paint you could always machine polish the area or the complete wings before you install the new badges.