Hey I just changed the shift solenoid on my 04 dodge. I watched your vid on it and it fixed the problem but I ran into another problem and I’m not sure if I did something wrong or if you might be able to tell me what you think it is any help tho would be really appreciated
@juancastro69343 ай бұрын
@tylerclardy6835 what other problem did you have?
@tylerclardy68353 ай бұрын
@@juancastro6934 so the truck was fine before the solenoid went out so I changed it and it fixed the problem of it not going into park so I could start it but after fixing it and getting the truck started when i shifted into drive or reverse the truck had no movement at all
@juancastro69343 ай бұрын
@@tylerclardy6835 very strange symptoms. Since it happened after you did the solenoid replacement, it's likely related to that. If you loosen valve body bolts accidentally, then shifting would be affected.
@tylerclardy68353 ай бұрын
@@juancastro6934 alright I’ll be sure to check that out thanks for the info
@jlrockafella3 ай бұрын
Isn't there 4, 2 on ea side?
@PEDRO002444 ай бұрын
I’m in the first mode with the odometer showing I press the pick up button and then the ok button but nothing shows up on my screen
@austinrawlins90994 ай бұрын
Would you happen to know the part number on that clip that you replaced?
@juancastro69344 ай бұрын
@austinrawlins9099 if you're referring to the fuel line retaining clips, they come in a pack with black and white clips at AutoZone. Dorman Fuel Line Clip 800-023. Hope this helps.
@austinrawlins90994 ай бұрын
@@juancastro6934 Thank you so much!
@bhen2054 ай бұрын
You didn't mention that you have to hold the phone pick-up button and the OK button simultaneously for 5 seconds in order to enter that mode.
@juancastro69344 ай бұрын
Thanks for the information. I didn't have to do that. In my case I only had to do press them within a second of each other. Hopefully people read your comment and try that as well. Best of luck to everyone watching and posting.
@bhen2054 ай бұрын
@@juancastro6934 hmm, I found out by watching another video after not having success by just pressing it. Maybe it varies by year. 🤷🏽♂️
@bobbydynamite97085 ай бұрын
Great job not doing all the extra work for no reason ……
@ssanmor5 ай бұрын
This is what I call "doing things with great care" :-)))
@dinkbuster15 ай бұрын
Have a 2006 4.7, po871 code. Reset computer it shifts fine for about 25 miles or so, then after shutting off truck for a few and restarting and driving off, lose the shift at 45 mph and OD at 60. Other than that shifts fine, no slipping. Would this solenoid cause this?
@vryan40716 ай бұрын
Is it always rear brake pads that go out first or front?
@juancastro69346 ай бұрын
It varies by vehicle, and other factors. In my case, my Mercedes rear brake pads went out first because of lack of grease on the caliper piston bracket pins.
@AsianBlackR35015 ай бұрын
@@juancastro6934 Mine rear worn out and uneven wear first.
@1koolblue6 ай бұрын
Props for making this video for us, shops wanted $750 to $950 for this job with a new pump.
@terrancerussell94836 ай бұрын
Is the tank metal or plastic?
@wassimjacob94856 ай бұрын
Thank you for the video. I am about to replace the solenoid on my 2005 ram 1500 . i have codes p0700 and P0755
@TornStxtic8 ай бұрын
My piston won’t go back in
@zeowolfpup48028 ай бұрын
i have a 2005 ram 1500 5.7 and it says P0700 tcm but my truck has none and it goes to limp mode can this be the solution
@rigobertodimas80148 ай бұрын
Bro its people like u who trigger my ocd just remove the truck bed leave the tank in place just remove the bed its only 6 bolts holding it down 3 on each side and u gona have to remove the tail lights pick up the bed pull it back far enough so u can see the fuel pump on the tank just un do just the pump assembly the wires and hose to trust me bro its a huge time saver
@ejlapinski9 ай бұрын
very well covered many good tips thank you👏
@Zetho10 ай бұрын
Thank you!!
@Gillespie515010 ай бұрын
That did absolutely nothing on this car
@dwightlester6309Ай бұрын
Hold them simultaneously
@Gillespie5150Ай бұрын
@@dwightlester6309 I’m sorry but I did. I used my Autel scan tool instead
@aaronhernandez337811 ай бұрын
which side passenger or driver side is needed to change out whenever the driver side throws out hot air and the passenger side throws out cold air ?
@juancastro693411 ай бұрын
Unfortunately, I can't tell which blend door and the service manual I have does not clearly specify. If you hear a clicking from one of those actuators, then it would need to be replaced and that would hopefully fix your problem. Best of luck
@adrianloma176911 ай бұрын
That clip that you disconnected that connects to transmission - does it need to be flush or is there a little gap 1:05 video mark - I seen you pryed it with you flathead
@juancastro693411 ай бұрын
That red clip is a security clip for the plug and when you put it back it will go all the way in and you'll feel a click.
@juancastro693411 ай бұрын
That red clip is a security clip for the plug and when you put it back it will go all the way in and you'll feel a click.
@noeaguinaga4018 Жыл бұрын
I was screaming tip the front end!!!! Lol
@gabrielsalazar6648 Жыл бұрын
Did this fix your problem
@gabrielsalazar6648 Жыл бұрын
Why did you change this part.what was going on with tour transmission
@rasfassalazar2150 Жыл бұрын
Thank you so much for this video 🙌🏼💯
@ballislyfe5814 Жыл бұрын
Hello what kind of transmission is this?
@juancastro6934 Жыл бұрын
45RFE
@andygodoydeleon3806 Жыл бұрын
It doesn’t work for me I also have a 2016 cla 250 but whenever I press em two buttons it just ask me reset trip odometer I don’t understand what else I have to do pls help!
@juancastro6934 Жыл бұрын
@andygodoydeleon3806 Please make sure you have position the star button to the first position with only the airbag and brake light on. Position the display to odometer before pressing the phone pickup and ok buttons. Press Phone pickup button first and in less than one second but not at the same time, press the ok button. I'll upload another video I just recorded today for the same process.
@andygodoydeleon3806 Жыл бұрын
It doesn’t work for me and whenever I press them buttons it’s just ask reset trip odometer what else do I have to do?? Pls help
@Chocolatemilk2percent Жыл бұрын
what was the reason for changing the solenoid?
@Chocolatemilk2percent Жыл бұрын
@@juancastro6934 much better lol thanks. My truck shakes when it shifts into overdrive so i was hoping you had the same issue.
@tyrellestephens7671 Жыл бұрын
Thanks Juan gonna try this next weekend
@Natlasha Жыл бұрын
Thank you so much this was very informative
@OsamaBeenHarris Жыл бұрын
Do u know if I have to do all of that if I wanna replace the hub bearing?
@juancastro6934 Жыл бұрын
I'm almost certain you'll have to in order to get the hub removed
@OsamaBeenHarris Жыл бұрын
You are an absolute unit! Thank u for taking the time to make the video
@red-cc4xp Жыл бұрын
Make sure you are also on your mileage screen. Will not work on any other
@donnieabreo8855 Жыл бұрын
Thanks for the video ..great help
@robertstell2455 Жыл бұрын
thank you so much
@sexycaprisun Жыл бұрын
Thank you. Very much
@mrmoejoe Жыл бұрын
Thank you sir. This video was very helpful. I completed the task in less than 20 minutes for my wife.
@lunarp4159 Жыл бұрын
Thank you but turning light what size number cla250 2015
@bernie472 Жыл бұрын
Good video. I have a 14' Charger R/T that had this issue, and I bought a 4 seasons brand a year ago for $20.00 from Rock Auto, and it's been fine. I didn't want to pay $74.00 for the Mopar one from Rock auto if I could avoid it.
@omarpereira4741 Жыл бұрын
Y por donde hechas el aceite nuevo
@irishgiant3215 Жыл бұрын
My 2015 counts down the days. Its dumb because I only drive two days a week. Only put 3500 miles since last year oil service.
@osirisnero8641 Жыл бұрын
Hiya Juan, do you happen to have the part number for that shift solenoid?