Hey, any tips on how you refurbed tbe front roller and got it looking so fresh? Mine looks tired like this one and want to get it cleaned up!
@mowerboy791428 күн бұрын
@@ryanellis5401 I've done a video on this Ryan. You take the roller off with a 13mm socket. Video here kzfaq.info/get/bejne/ibGZabFkuJ_UZWQ.htmlsi=oNmePNp9yIse9vzD
@timmymagic1000Ай бұрын
Do you have an online shop ?
@mowerboy7914Ай бұрын
I'm just in the middle of a house move so not much for sale but here is the link. Was there anything in particular that you were looking for? www.ebay.co.uk/usr/mowerboy
@timmymagic100022 күн бұрын
@@mowerboy7914 verticut 14” please.. I appreciate they are tricky to find
@timmymagic100021 күн бұрын
@@mowerboy7914 I'm look for a 14” veritcut cassette please.
@mrz5705Ай бұрын
I guess you feel the need to talk for 3mins, out of 5mins please don't.......
@mowerboy7914Ай бұрын
Thanks for the comment. Interested to understand why you say that
@leefenton9477Ай бұрын
Good luck with the move chap. Hopefully you will have a nice work shop to move into too😅
@Ray_ray11Ай бұрын
Good luck. Your garden looks like Micks Mowers 😂
@josephcoagrove580Ай бұрын
Best of luck with your new home
@Thomas-gg3yy2 ай бұрын
Do you have a shop or eBay page that you sell your mowers on? Thanks
@mowerboy79142 ай бұрын
Hi Thomas. My ebay page is below. I'm in the middle of a house move at the moment so only have cassettes for sale www.ebay.co.uk/usr/mowerboy
@Thomas-gg3yy2 ай бұрын
@@mowerboy7914 Thank you!
@gr3282 ай бұрын
The 43 is much high specced than the smaller Liberties. The paint comes away anyway, even with a good spraying of WD.
@mohammadasim12162 ай бұрын
Can I have your number?
@ALLETTMOWERSUK3 ай бұрын
Hi 5m48 you don't need to undo that section... it is just two screws one each side of the cylinder you need to take out.
@AndrewWinyard3 ай бұрын
Im looking for a blade cassette for an Atco Balmoral 20S, does the mower cassette for the 20S & 20SE both fit the 20S mower please? also does anyone have one for sale please?
@mowerboy79143 ай бұрын
Hi Andrew. Yes it's the same QX blade cassette that fits these. Are you looking for 20 inch 10 blade or 20 inch 6 blade? 07768824848 is my number
@camerontyler-vann73403 ай бұрын
Can you sharpen the reel yourself or do you have to send it off to be sharpened?
@mowerboy79143 ай бұрын
Hi. I can sharpened the reel by backlapping which is good during the mowing season to keep it sharp. But it's not the same as a lathe grinder so one a year it's worth sending the cassette away to get it professionally done
@gr3283 ай бұрын
I believe they're keeping the Liberty in the lineup too.
@themowerman3 ай бұрын
Ohh thats nice.. i don't like the name.. it should be called the Allett Bognor Regis
@mowerboy79143 ай бұрын
Got a ring to it. Along with Lord Mick 🤣
@leefenton94773 ай бұрын
Can you start off , by back lapping with the cylinder fully away from the bottom blade . Or does it need to slightly catch it atleast. If it’s not great weather today , I might having a go 😅
@mowerboy79143 ай бұрын
It needs to be slightly touching. The paste then causes an even closer contact. You know it's working because of the noise of the ringing. Then take it a notch closer etc
@leefenton94773 ай бұрын
Do you gain the oil out of mowers chap,or does it do no harm to leave in them until you do you service and replace with new 😃
@surreyarborist3 ай бұрын
Whats your views on no mow May just wondering.
@surreyarborist3 ай бұрын
About 40 years i had a battery mower think it was a suffolk lead acid battery did 2 mows of my lawn before recharge. Have to say it laid nice lines and did a fine cut. Got a new mountfield rotary not as good for a quality lawn. We have gone full circle in my lifetime. Withe the more newer motors and batteries should be fine. My old electric was only push mode.
@edbot4563 ай бұрын
hi Colin. I sold you my Atco 20 inch last year. Im in Basingstoke. I hope you got it running ok and maybe made some money from it. Its a satisfying hobby getting these machines back into good fettle.
@jasperedwards27133 ай бұрын
early 90s i had a webb mower with battery
@jasperedwards27133 ай бұрын
i been to allet its not far from truro
@ALLETTMOWERSUK3 ай бұрын
Hi we are in Hixon Stafford now
@Thimeri0n3 ай бұрын
I just struggle to see any of these £2k+ battery machines still running in 50+ years time when you know full well there will still be randomes and atcos running that are donkeys older than that
@mowerboy79143 ай бұрын
Fair point. As I said in the video I'm not a battery fan. But this machine is next level. And if we are starved of Petrol in a few years who knows?
@andrewstafford-jones42913 ай бұрын
£2,100.00 you must be joking! Nice mower but what a price.
@b.22213 ай бұрын
Totally agree with you Sir, and the price point is going to kill Allett in the long run. You can’t expect people to associate the classic green and red as the Rolex of lawn mowers, because there are American and Australian manufacturers who are just as good quality or better at slightly lower price points.
@Ray_ray113 ай бұрын
I'm jealous. Why did they not buy it from Allett themselves?. 😢
@mowerboy79143 ай бұрын
It's not easy to buy Allett in Europe. The Germans gave just got a dealership but not sure about elsewhere
@leefenton94773 ай бұрын
Very nice and new 😎😅
@Flumpsarus3 ай бұрын
Very sleek looking mower that! Someone is very lucky!! 👌
@themowerman3 ай бұрын
Very nice... Look fantastic
@briancorcoran41423 ай бұрын
How much for the kensington 17?
@mowerboy79143 ай бұрын
Hi Brian it's £850. Andy 07768824848
@Roo23983 ай бұрын
I don't suppose you have any parts for a balmoral 14sk do you?
@mowerboy79143 ай бұрын
What do you need Andrew. WhatsApp me 07768824848
@leefenton94773 ай бұрын
Aww gosh , good work there by spaceman
@Ray_ray113 ай бұрын
You need to invest in a van. Perfect way to spend a day. 😂
@00Video13 ай бұрын
Great Andrew😊
@Ray_ray113 ай бұрын
Very useful video. Shame the birds were drowning you out. 😂
@mowerboy79143 ай бұрын
Ray you should hear them at 5am 🤣
@silent-.-3 ай бұрын
Thanks for sharing
@Ray_ray113 ай бұрын
There is a Lawn Expert video on you tube,he uses Allett mowers. He has just bought a new Kensington with the Honda engine. He is now saying that the Kawasaki engines were problematic,and after a year they will only run on choke,and are hard to start. Have you heard of this?. I have a Kawasaki on my Kensington.
@mowerboy79143 ай бұрын
Hi Ray. If looked after properly the Kawasaki is fine. If you use the wrong petrol or leave it in over winter then any mower will struggle. Sounds like he doesn't know how to clean a carb. Having said that the carb on the Kensington is harder to clean than on the Balmoral kawasakis as they switched supplier. Who was the lawn expert. Was it Daniel Hibbert. I rate him but haven't seen any recent videos
@Ray_ray113 ай бұрын
Hi. Yes it was Daniel. I always use top grade fuel and also use Briggs and Straton fuel fit and never had a problem.
@weepz3 ай бұрын
How do wash the paste off the brush? Is it a water based product or would I need something else to clean it.
@mowerboy79143 ай бұрын
I just spray with water. But don't often clean the brush as I'm back lapping 3 or 4 times a week
@weepz3 ай бұрын
@@mowerboy7914 thank you and that's a lot of back lapping but understandable in your case. :)
@Ray_ray113 ай бұрын
Hi. Do you do much mechanical work on your mowers,or is it mostly clean up?. I have limited mechanical knowledge. I once had to buy a mower deck for my Classic and swapped all the components over. It is still running😂. Another great find.
@mowerboy79143 ай бұрын
I do all the standard stuff Ray with the many things that can go wrong. But I draw the line at taking the engine to bits. But I've switched engines quite a lot and that's no problem
@Ray_ray113 ай бұрын
I bought a 10 blade some time ago,got it on ebay with a cheaky £65 offer, and it was accepted. I dont think they realised the value of it. Fitted 2 new bearings,sharpened and painted it. Used only a couple of time, didn't really see the benefit on my lawns. Been sitting on the garage wall for a long time. I was thinkg of selling it but scared to part with it😂.
@mowerboy79143 ай бұрын
It's a 14 isn't it? Probably worth £220 to £275
@weepz3 ай бұрын
8:42 how did you clean up the mower? Plans for any videos of bringing this one back to life. Was hoping to hear the SE start up on electric ;)
@mowerboy79143 ай бұрын
Yes I'll get a battery on it. Good point. The Allett Classic was cleaned with wd40 and a course green scouring pad. I buy the 5L wd40 containers which come with a spraying applicator.
@weepz3 ай бұрын
@@mowerboy7914 Oh wow that's a serious wash down! Has come up nice! Thanks for that info, not sure the missus would let me do that in our garden though lol :)
@mowerboy79143 ай бұрын
If people did that before they sold their mowers they would get 25%+ more
@weepz3 ай бұрын
@@mowerboy7914 😃 I may have to give that a go on a small area to start with on my Qualcast 35s I picked up for £60. Maybe next year I'll pick up a much better looking one.
@johnj45583 ай бұрын
It definitely cuts well with that 10 blade. A dose or two of lawn treatments (seaweed etc) would make a big difference to the grass and colour
@mowerboy79143 ай бұрын
Thanks John. Will look into that. I'm looking at non chemical assistance so seaweed is a good shout
@leefenton94773 ай бұрын
Looks nice chap 👍
@weepz3 ай бұрын
Nice one, the 14SE I would love to hear start up. Think you may have mentioned before they have a lot of trouble starting from the electric motor.
@mowerboy79143 ай бұрын
Yes I'll pop a battery in and show that in my 10 blade challenge video
@Ray_ray113 ай бұрын
An absolute gem.
@mowerboy79143 ай бұрын
It's a privilege Ray
@richardrook49473 ай бұрын
Which is the best cylinder mower under £500
@mowerboy79143 ай бұрын
Hi Richard. If you have a lawn up to 150 sq m then Atco Balmoral 14sk. Bigger than that upto 300 sqm an Atco Balmoral 17sk if you can find one under 500 (fully serviced). Or the Suffolk Punch 17sk. All have the Kawasaki engine
@weepz4 ай бұрын
This was a handy video as I am looking into a secondhand cylinder mower and I wasn't sure if you could get a 14" scarifier cassette. I wonder if you can get a 14" verticutting cartridge too?
@mowerboy79144 ай бұрын
Hi Luke. Yes these type of mowers take several cassettes including scarifier, verticutter, Dethatcher, 10 blade, aerator and lawn brush. Getting them second hand isn't easy (except the scarifier)
@weepz4 ай бұрын
@@mowerboy7914 oo sounds exciting and that's good to know as I think a 17" will be too big for my space. Thanks for the help. Subbed!
@Ray_ray114 ай бұрын
How do you find them?.😅 It's pronounced EEEEEELY.
@Ray_ray114 ай бұрын
What a great find. Yes the verticutter is hard to find. I think i mentioned before that i have the aerator and it barely penetrates the soil.
@mowerboy79144 ай бұрын
Yes Ray the aerator needs to be used on soft ground on the lowest height setting. Now is perfect
@ljones3964 ай бұрын
It's probably the poorest of all the cassettes, I only ever used mine once. Nice tidy machine though, I keep toying with the idea of going battery but I'm still unsure, I still like my Balmoral 20sk.
@lionelbarthelme45504 ай бұрын
Hi, I'm looking for a starter with pinion for my 20Se. have you got ?
@mowerboy79144 ай бұрын
I'm sorry but these parts are no longer manufactured. You'll need to find one from the guys who buy and break up Balmorals. There is a guy called Spaceman on ebay who may be able to help. I'll get him to contact you
@lionelbarthelme45504 ай бұрын
@@mowerboy7914 thank you
@lionelbarthelme45504 ай бұрын
you don't have one on one of your machines that doesn't work
@user-ip6oq8cj5iАй бұрын
@mowerboy7914 what do you recommend to restore the faded plastic to the side of the mower?Thanks
@mowerboy7914Ай бұрын
@@user-ip6oq8cj5i After a good clean I use wet and dry sandpaper on the faded area. If there are scratch marks then a coarser grade of normal sandpaper first (test via the underneath of the side panel). I then spray with clear lacquer. 3 coats. I do the same with the petrol tank and any other plastic parts
@Cemlyn274 ай бұрын
What do you use to treat the steel that’s oxidised?
@mowerboy79144 ай бұрын
Hi I did a video on it. Here you go kzfaq.info/get/bejne/ibGZabFkuJ_UZWQ.html
@bertnees32264 ай бұрын
Hi mower boy, do the catridges of allett/atco fit in the suffolk punch?
@mowerboy79144 ай бұрын
Yes if it's not a very old Suffolk Punch. Certainly the Kawasaki ones take all the cassettes
@christiandaulman78764 ай бұрын
Just bought a Suffolk punch 17sk. First do you have a scarifier attachment for sale?