Mechanic for forty years had Mac impact Wobblies they had a pin with no ring to secure them, one came apart and destroyed one of my fingers lost the end of that finger,after that bought snap on they have a ring
@AdamHammel2 күн бұрын
What type of stud remover are you running?
@HuntsWorkshopКүн бұрын
AST
@JeremyCarnahan2 күн бұрын
Hell no.
@dontcallmemarty21772 күн бұрын
By the time you set those leave things up I have already either drive onto ramps to jacked it and Jack standed it
@seymourwrasse33212 күн бұрын
at 3:03, the support to your left is bgent, throwing it out of line with being square to the jig
@MillieMuncher3603 күн бұрын
How much is it though?
@miketattersall32343 күн бұрын
Rip off
@HuntsWorkshop3 күн бұрын
If you don’t need it or can’t afford it, just go to harbor freight. Don’t be mad others have it.
@MarcoH723 күн бұрын
I’ve passed so many nickels on the street because I couldn’t pick them up, but I won’t be passing up any more nickels now that I have my Snap On Talon grips!
@HuntsWorkshop3 күн бұрын
Hahahaha
@greglopez22173 күн бұрын
Thank you! Zip tie trick worked on the heater hose connector 03 Escalade
@johnzmijewski5573 күн бұрын
Hydraulic or pneumatic hoses? Im just confused whats quick connecting?
@HuntsWorkshop3 күн бұрын
Hydraulic
@brunofeitosafl4 күн бұрын
Someone tested this?
@CaptainChristianZ18184 күн бұрын
I wouldnt trust it. The side steel frame looks too slim for my comfort. Pass.
@andrewh2u5 күн бұрын
Dug an inspection pit in my homes garage. Pull up the floor shutters whenever I need to work under the car.
@patmason72765 күн бұрын
Don't know if I'd trust that. Would still use stands.
@medic6yaeta2545 күн бұрын
How much 🤔?
@vmoya66315 күн бұрын
No thx. I heard the brand of those are widow makers
@HuntsWorkshop3 күн бұрын
I’ve never seen negative press on them or any recall, so you just assume what you like 👌
@RamandChevyOwner5 күн бұрын
My diesel lab at my trade school has this exact same one
@bassdaze6 күн бұрын
lol... you know how many trash snap on tools ive broke??... pittsburg is way better...
@HuntsWorkshop3 күн бұрын
Don’t be ridiculous.
@anonymousanonymous12666 күн бұрын
Junk,no thanks
@HuntsWorkshop5 күн бұрын
Says only harbor freight guys 🤣
@darrellm.96226 күн бұрын
I still don't trust that lift
@takeshi12426 күн бұрын
Lol no….
@limitlessworx57246 күн бұрын
Yeah there great when u spending a house payment every month but warranty or anything else yeah forget it
@HuntsWorkshop3 күн бұрын
Why did you like your own comment? I see a lot of people do that, but it seems to lose all credibility if you have to do that to be seen.
@limitlessworx57243 күн бұрын
@@HuntsWorkshop I didn’t like my own comment what are talking about ?
@GOLDFOLDS16 күн бұрын
YEAH... ITS ONLY 2000.00 DOLLARS... HA. CHICKEN FEED. THIS IS SUCH HORSE SHIT.
@jgrm44436 күн бұрын
I would still use my trusty jackstands.
@joworkstoday55296 күн бұрын
yea i agree for around $16k he better be giving it the huk tue
@genogarner22876 күн бұрын
I want the temu brand
@darinb35247 күн бұрын
Be still my heart
@LexMindtrix7 күн бұрын
Hate to see them give out. Place jack stands
@wydopnthrtl7 күн бұрын
I've had a set of XL 7000 for about 3 yrs. They are NOT quick. But they are handy and do function well. Eyeballing them for alignment and watching the car rise to see if it slips sideways is the hard part. IMO in the cold the line cover caps are way to hard. You have to use a screwdriver and nearly destroy them in order to remove in below 50F temps. Otherwise... they are VERY handy if you can't dedicate space for a bolt in lift.
@piotrpaszak7 күн бұрын
Problems with the air cylinders leaking after a year. No way to seal them other than to replace the whole cylinder assembly. Other than that very useful.
@HuntsWorkshop7 күн бұрын
It isn’t just the Schroeder valve? Usually tightening that up one time fixes any issue.
@piotrpaszak6 күн бұрын
@HuntsWorkshop No. Shroeder valve doesn't leak. At the rate it loses the air I would certainly be able to see a leak there.
@HuntsWorkshop5 күн бұрын
@@piotrpaszak Have you contacted bendpak? My understanding is they will replace the air cylinder. At least your larger hydraulic cylinder is good.
@piotrpaszakКүн бұрын
@@HuntsWorkshop I have not. I am out of warranty. Last time I contacted them for the rubber block replacements (they started splitting) I didn't get much help. Just have to fill the cylinders up every time I need to lower the car.
@diligentsun11547 күн бұрын
Ingenious! When i get a garage, these are A MUST. Indispensable!
@Louisthefur7 күн бұрын
How much?
@bugsuck117 күн бұрын
I used to use ramps, but it's impossible to do suspension work and even remove the wheels.
@godkking7 күн бұрын
$1900
@gurban3338 күн бұрын
these are like 1500. USD lol no thanks
@blusensation23508 күн бұрын
What’s the price tag
@yell0wberry8 күн бұрын
Anything and everything you need to fix your car should be in that toolbox, if you don’t find it in there, you don’t belong near a car
@jclavarreda838 күн бұрын
Those things seems like more work than their worth....
@yosipko52828 күн бұрын
💵💵💵💵💵💵💵💵💵💵💵
@BBoy_PopTart8 күн бұрын
$1559 at Lowes, $1925 on Amazon and Ebay, and $2125 at Walmart.
@JimTexas8068 күн бұрын
Doesn't look any faster than a jack and 4 stands. Am I missing something?
@doobtubes9 күн бұрын
I don’t trust it
@hueywarren47789 күн бұрын
Definitely still 4 jack stands going under
@arpadcsorba20539 күн бұрын
Doesn't lift high enough. My gut would fuse to the exhaust in no time. Probably make one hell of a grease fire.
@kilam221210 күн бұрын
This is the best video by far to pull these clamps off!! New subscriber Thanks!
@HuntsWorkshop9 күн бұрын
Awesome, thank you!
@bayroadbys240810 күн бұрын
What color box and trim is this thanks!
@HuntsWorkshop9 күн бұрын
Royal blue and titanium trim with stainless led top
@devinmccloud10 күн бұрын
Cost = your life!
@HuntsWorkshop9 күн бұрын
I use this and 2 post lifts every day and I’m still here to talk about it.
@maxspeed5710 күн бұрын
Came here to say this. Don't trust anything but jack stands.
@HuntsWorkshop9 күн бұрын
This is a jackstand, with a hydraulic cylinder that is sealed when hose is disconnected.
@oldretireddude10 күн бұрын
I have these and really like them, but though it may be obvious, be warned the lack of side access can be frustrating.
@HuntsWorkshop9 күн бұрын
Yeah, you definitely get used to a low profile creeper with the wheels outside of it and using your arms to rocket in and out from under the car.