I don’t see a reason it would not work, but can’t say with 100% certainty that it will because I do not have a 5500

Thanks…just been busy with life….would love to get back at it

It’s all personal preference, mine is red on the rear of the vehicle only, amber should only be in the front….personal preference though.

Sorry, but I literally pulled back the seal just enough to push the cable in.

What are you connecting with, and what program are you using? Not sure I can help but I’ll try

@@rockyaev8287 autel scanner.

I have not, this truck was a manual. But they are correct if it’s not a dealer with “proper” software you will need a work around to get into the BCM. Once in the Body Control Module you can clear, correct, unlock, lock tons of features.

I left mine in. Been there for couple years now with no issues

48”

Exactly. the most important part he skips over

Been on here for a couple years and zero issues to date.

I would refer you to the owners manual, however to my knowledge that weight alone is under the max, but you must take into account the weight of the trailer.

If you go to Facebook, search for “Rocky AEV Fans” it should be pinned to the top of the page….let me know if you find it.

It’s the 18” light bar. Yes I am, appreciate you and your service as well.

@@rockyaev8287 thanks

Yes……it’s been a while but I believe I went in to the body computer and changed the computer setting to led….I used alfaobd, if you don’t have that the dealer can do it. I swapped the taillight bulbs to leds and that’s what caused it.

Thanks for the reply. I'm coming from a Ford and was pretty good with forscan so I'm sure I can figure out alfaobd.

@@joshp.2237 it’s a really good program, tons of videos on use….and tons of things can be adjusted / turned on without going to a dealer. All in after paying for the program, blue tooth obd tool to connect and for newer rams a security bypass harness…..I think $150 ish…..dealer charges 100 to do anything. I’ve turned on tow mirrors, changed tire size for speed correction, changed fuel tank and was able to change the size in the truck to read correctly on fuel gauge….well worth it.

I’ll have to check, but think we still have the factory one….that what your asking?

Don Ringler Chevrolet

@@rockyaev8287 BEM auto fuel cap

@@rhersey3024 haha sorry, I was confused. So I think they have moved solely to Facebook for sales. Try this link….if it doesn’t work try searching for bem auto on Facebook facebook.com/BEM-Auto-1929689857353456/?hc_ref=ARQ95d9XumrBdxadkdByMtl1cyyyycwxgDC-pVNbfVT4z3nRgK1Qpizk6boRJqzM40M&fref=nf&__xts__%5B0%5D=68.ARC4DEnFkeEHT-2VYCnN6G8zmbHqa74BFOGiFBDkp-AKQsym7wqrrfMudQ0lmH8xNLoKldZcZc4PwCfZ-2Cs_EkgCiGJ75R_uWtqCnrWnaya5-Rx5qiba7GpuMkCNEo_ldqVi3KkUHnRXunBP8wKXkC7CvbHfaHGgwKQDpwDsexJzPP5kqUxBtoyHV7nZzlDk3zRm51VIx6f-EPRH8JoNFBdZh9DulCb206YMF5WDoqCj7CfSOCHhPqiOHiNMdHb66aIBk4Sb4qnRZhyCMoDqKdoZlp1WLUEFAPnHUhiJlSQDD5JkN5C7x0&__tn__=kC-R

We did not need one, but I’ve heard that the fords do…I would shoot them a message just to be certain

@@rockyaev8287 thanks for the reply. Yeah after more research I’ve seen people with fords saying they needed one, but I also saw that you can hardwire the light bar to each tail light instead of down by the hitch which was causing the trailer connected problem.

@@paynehobbs2740 that makes sense, if you bypass the vehicles plug the light bar doesn’t care ……but I must warn you if you have a warranty, doing this could void it….just be certain on what you tap into 😎

Yes it does, that’s the primary way to use the trailer brakes….however in the event your trailer starts swinging back and forth you don’t want to use the vehicle brakes…it can cause you to loose control, rather apply the trailer brakes alone and you in most cases will stop the swinging without loosing the steer ability (this is usually caused by over loading the tongue weight)

@@rockyaev8287 or loading the trailer with too much load weight behind the axle, easy example, backing a car on a car trailer not far enough forward. 22 year OTR Driver. 2019 Z2R

@@ronmckenna7903 you are 100% correct! Proper tongue weight is extremely important!

In the video it shows the price when showing infotainment.com but at the time I paid 1200, not sure what it is now.

@@rockyaev8287 it’s a killer upgrade but I’d have to prioritize Katzkin leather seat covers first. Looks sharp AF tho

Heck yeah! We absolutely love having the cameras, in fact we have added them to our other vehicles…..just wish they had one for a motorcycle 🤣

No, we have had zero problems to date…..….ours may have the best results because at home it’s under cover, and at work it’s under cover…..I honestly believe that most people who have problems have them because the screws were over torqued and the light housing cracked. Just my opinion though.

Absolutely! Glad it was helpful, thanks for watching.

You may be able to do it without, but I found it made it easier to remove due to the one nut that’s really tuff to get too.

Thanks for watching

Cool deal, we never investigated to find out for sure what it did! Thanks for the information

Absolutely, thanks for watching

Yeah I’ve changed trucks and gotta do it again lol

Thanks for watching, and the comment. Glad it helped

To be honest, I’m not sure, just started with a smaller bit and worked my way up slowly until it fit. 😬 sorry I can’t give you an exact answer.

Heck yeah! Glad it was useful for ya…thanks for watching

Yes it is how it was designed, to decode turn from brake….there is a slight delay. And it’s the 48” bar.

Thanks for watching and for the comment, hope the video helped.

Awesome, thanks for the input. We love our ZR2, been a great purchase for us.

Haha, heck yeah! Glad it was helpful…yeah I keep wasp spray on hand…just wasn’t nearby when he made a visit 🤣

I just pressed really well on the surrounding areas to ensure a good adhesion….still going strong to this day.

It’s been a while, but you should be able to knock it out easily under an hour.

Absolutely I hope it helped make a decision.

Absolutely, thanks for watching