Thank you, sir. Thermocoupler was the issue. Salute!
@TimWillinghamRatz4 күн бұрын
This was a great idea and set of instructions. Not quite everything is self-explanatory, but anyone can figure it out. I bought a different rivet tool since the one you posted is no longer available and was disappointed with the sparse instructions and lack of a storage box for it, but was able to get the job done.
@rafitaino31375 күн бұрын
Please next time u do a video do better explaining like what size drill bit u use, size of the revit
@rafitaino31375 күн бұрын
So what size hole did u drill???
@curtismahaley6 күн бұрын
You are a tool snob… he😂!
@pittssteelers69 күн бұрын
Isn’t that a water channel to catch the rain and run it down to the corner where u drilled that hole?
@jvideosearch11111 күн бұрын
Can you come do mine?😊
@vette411819 күн бұрын
NOW MY DOME & MAP LIGHTS DONT WORK--- THE REAR SEAT ONES DO - THE FRONT IS TOTALLY INOP.... DID I RUIN THE UNIT SOMEHOW'?... 2010 XC60 T6
@bonzi5448Ай бұрын
Dude, the thing you just pulled the end off is the switch that shuts off the gas not the thermocouple. Its operated by the thermocouple which is beside the igniter above the pilot light flame and also by the tilt switch. Hence two lines that run into it. Your tilt switch wont do anything now so you can just bypass it anyways.
@Mr40warhawkАй бұрын
Unfortunately he skipped right over how tight engine mounting bolts should be...which is why I watched this
@mkay00700Ай бұрын
I was all set to install the mount you used on my Purple Leaf gazebo and realized that the triangle roof pieces have a lip that is going into the channel I was putting rivets in. Does your gazebo not have the roof pieces sitting in that channel you mounted too? I stopped my project shy of drilling.
@zardoz1138Ай бұрын
I wanted to hang my 43” tv in my metal roofed gazebo and came across your video. I was trying to figure out the best way to do it. Had no idea about the threaded rivet tool. Bought it at Harbor Freight and within 30 minutes had the tv hung. Thank you for this video.
@Emajination11 күн бұрын
Do you have a video as well?
@julioortiz7160Күн бұрын
Is that comes with the bolts ?
@michaelclark741Ай бұрын
Perfect, thanks fella 👍🏻
@jmcnite12 ай бұрын
Just finished this same setup. Thank you for all the info.
@Emajination11 күн бұрын
Do you have a video as well?
@jmcnite12 ай бұрын
What size drill bit did you use? I’m planning on doing this same setup this weekend. Ty
@westwizard892 ай бұрын
Same looking to see what size drill bit was used and what size rivet nut what was used.
@user-hh9vx6vq9n2 ай бұрын
never did show the most important part as how to adjust the cable???????????
@zaneblane81602 ай бұрын
Care to update? Would you change anything?
@humbertoflorentino82212 ай бұрын
Do you happen to have the link for the screen you used? I have the same gazebo.
@rtcharghita2 ай бұрын
You talked a lot and worked a little :-(
@markdull632 ай бұрын
Another heater saved from a landfill! The company I work for threw one of these 3 foot tall heaters in the dumpster. I dusted it of and pulled it apart but couldn't get it lit. I modified the regulator like you explain and now it works great. I don't even need a space heater i just like to fix stuff and keep things out of the trash. Gonna pass this off to a friend.
@delorsebarnes63282 ай бұрын
Thanks for sharing. Can you please tell me what size screws did you use and what size Rivet nut did you use for the holes and what size drill bit? Did you use? Thank you.
@outdoortvmount2 ай бұрын
ZeboZAP tv mounts straps without drilling upto 85inch tv.
@jefflovinfishin6212 ай бұрын
Can’t use those when you have curtains on the gazebo. The curtains wrap across the posts so the mount would be behind the curtains.
@julioortiz7160Күн бұрын
Yes that’s my problem too the curtains !
@kerisatterwhite96182 ай бұрын
My heater is whistling or hissing. What is wrong and what should look for to fix?
@rdspurlin3 ай бұрын
Followed your instructions exactly, and the install was perfect. Thanks for posting this very detailed video.
@Route32rg3 ай бұрын
Best video ever! Saved for when I do mine!
@paulgale5233 ай бұрын
Worked a treat my patio heater had cut out random for the last few years. And they wouldn’t say on at all anymore and now it’s running fine 👍🏻
@johnpaul-mp7zc3 ай бұрын
Great video thanks We have a metal pergola/ gazebo too but the bar in the roof is only about 1/2 inch thick and it's right up on the exterior roof. Do you think the NEU MASTER Rivet Nut Tool, will support a 65 inch TV? thanks, any suggestion? john
@Neighborly_Content2 ай бұрын
Depends on the weight and bolt used to hold it. I may upgrade to a 40 or 46” but 65 may be pushing it.
@650mailman2 ай бұрын
What size screws are those going in the b a close of the tv I have the same mount but no screws everything that came with the mount are to big
@rafitaino31375 күн бұрын
@@Neighborly_Contentso what size drill bit, what size hole n what is the revit size???
@JessicaCallaghan-rr8xl3 ай бұрын
I am not mechanical in the least and decided to give this a go.....so glad I did. Your simple explanations and specific step by step advice were perfect. Can't thank you enough (and thank you for specifying the 13mm ! I now have two working patio heaters again!
@gregoriolinares12993 ай бұрын
Hola alguien que me ayude tengo problemas con una estufa de patio cambie el casquillo y puente los sensores y nada q enciende que otro problema puede haber
@veinspect3 ай бұрын
Does anyone know if this problem been addressed by Echo?
@Neighborly_Content2 ай бұрын
People have 3D printed larger sweeps that seems to do better. I’m actually looking to ditch mine as the wheels seem impossible to turn when loaded. I’ve greased and addressed the gears to no luck.
@dr.rahshaanengrum19883 ай бұрын
Thanks for posting this video. Used the same process and it came out great! Thanks for the video and links
@jeffkosek66414 ай бұрын
Awesome fix. Thanks homie
@obexrulez4 ай бұрын
Nice!!!🎉
@metal_stud_anchors4 ай бұрын
Zebozap best for outdoor tv mount use and perfect dir gazebo
@anthonytriolo36434 ай бұрын
You have not been maintaining your lawnmower by the looks of the dirt.when we are going to see the replacement?😮😮😮😮😮😮
@luissheppard23424 ай бұрын
What leds did you use? As it would appear the volvo canbus system seems very sensitive to leds being fitted.
@Neighborly_Content4 ай бұрын
Auxitos work but I’d prefer and use the LASfit.
@isaacidheileh75754 ай бұрын
I so appreciate these learning videos but dang why can’t they all just get to what we are here for.
@Neighborly_Content4 ай бұрын
Pretty sure mine is right to the point compared to others.
@timmylapp4 ай бұрын
i have the same mower and the Engine turns over but does not start I added new oil new spark plug new gas new fuel filter and a carburetor clean but it does not Get gas from the carburetor to the engine the mower's been sitting for about two years Outside What would you do
@Neighborly_Content4 ай бұрын
Have you checked the fuel pump. It’s the black disc shaped part near the top of the motor. It is a diaphragm known to split and fail.
@Chrisgpop4 ай бұрын
Dude, great save. Thank you. I had three heaters that were shite. I ripped out all three regulators. No more pilot nonsense.
@jimmyptorgerson1094 ай бұрын
So you reinstall without the spring?
@tvmountinguniversity19034 ай бұрын
Thanks for sharing. I used the ZeboZAP that straps on the vertical post. Pasted some duct tape on the screen and slit through to put the straps through.
@VillaLumina4 ай бұрын
ZeboZAP for gazebo tv recommande ❤❤❤
@LeslievilleGeeks3 ай бұрын
ZeboZAP is so great. So easy and well designed .
@outdoortvmount2 ай бұрын
@@LeslievilleGeeksthanks. Our patented no drill technology is the best gazebo tv Mount.
@LeslievilleGeeks4 ай бұрын
Get the zeboZAP solved tv mounting in a pergola in minutes. The best gazebo tv mount.
@tvmountinguniversity19034 ай бұрын
Agreed. ZeboZAP was easiest solution.
@Dream_backyard4 ай бұрын
ZeBoZAP worked really well for us too 😊 mounted a 50” on the corner of our gazebo.
@650mailman2 ай бұрын
Show us how
@timothyakus5 ай бұрын
Thank you, thank you, thank you!😊
@JaySingh-vy6je5 ай бұрын
Would the revit gun also be a good solution for a cedar wood gazebo?
@Neighborly_Content4 ай бұрын
I wouldn’t use this on wood, what they do make are wooden rivets that screw into a pre-drilled hole that then allow you to add a bolt. Just search “wood rivet”
@SuperBigfish765 ай бұрын
Great Video! Thank you fur posting! 🤙
@jamesd40135 ай бұрын
Thanks
@jasonboles75916 ай бұрын
Thank you sir for the top notch tips!!
@TioBullNation7 ай бұрын
Well done... Thank you
@Neighborly_Content6 ай бұрын
Welcome 👍
@sunmarkportland7 ай бұрын
Terrific advice--I have four patio heaters, all different models. Following your lead, I found and disabled the thermo-couplers on my Fire Sense and Uniflame heaters successfully. I suspect most patio heaters have similar internals so fixing the other two should follow the same procedure. What a great way to avoid throwing these guys into the landfill. Thank You!
@Neighborly_Content6 ай бұрын
Glad I could help, been busy lately but I’ve got more stuff coming.
@danconsie3987 ай бұрын
At 5:20, you do not need to reinstall the thermocouple fitting back into the cap as it is no longer necessary. The electromagnet/solenoid cartridge will seal the back end of the valve when the cap is tightened (5:05). You can cut the thermocouple wires and remove the fitting if desired (or just tuck the wires and fitting off to the side).