Will this system work if I don’t have perforations in my seat
@davetu59175 күн бұрын
How much for one seat?
@sivucit10 күн бұрын
Hi i have honda pilot head rest 2005 , this one doesnt have hole on the nipple that extend the rod. will this still work
@LeatherSeats7 күн бұрын
Yes, it will still work. The pipe on the pneumatic headrest shrinker tool is larger than the post, so when you push it up against the foam it can still effectively suck air out of it.
@JoeMcDome13 күн бұрын
After watching this video, can I request Eric to do my Charger seats when I order them tomorrow? 😆😆😆 Awesome video, and I'm now 500x more comfortable about ordering my upholstery from you guys. 😃
@markbelanger739413 күн бұрын
Bullshit video
@RichGann13 күн бұрын
It is just acc, 12v and ground wires?
@LeatherSeats10 күн бұрын
The wiring harness for these units just have a power and ground wire. We typically run a constant power, ground, and switched accessory power through a relay.
@adamjacobadamson202416 күн бұрын
At 00:45, you forgot to mention that the Silverado High Country has cooled seats.
@LeatherSeats10 күн бұрын
Great point. GM does offer a ventilated seats, but the GM ventilated seats we've looked into for this generation typically have fans in the seats that blow ambient air. It's possible the High Country received something different, but everything we've looked into for that generation doesn't have a thermo-electric device to cool the air being blown like the system we are offering. Either way having some ventilation is better than none!
@mrdave77716 күн бұрын
That interior. That dash. The transmission. Thank God the car makes up for it in other ample ways!!!
@markbelanger739418 күн бұрын
Did show shit of how to change the leather just to promote there company that does the work what a crock of shit.
@nedelchokisyov189820 күн бұрын
Can you do this on European Accord 2006 rear seats ?
@LeatherSeats10 күн бұрын
All of our kits are designed for US Spec vehicles, so we would need to verify if the European Spec models came with the same seats or not. If you'd like to look into this further please email us photos of the seats in your Accord to [email protected] and we can verify compatibility.
@acuralee20 күн бұрын
Do you have a link to this kit? My front seats are ripped to hell. Redid my dash using Polygem LCR Epoxy Concrete Crack Repair Kit with a VViViD Black Matte Car Wrap Vinyl... no air bubbles and it layed smooth. But took lots of sanding. But as far as seats go the only option i see working out is a full replacement :/ i curse Acura for their crappy dashboards lol. But my engine and transmission are still going strong.
@LeatherSeats10 күн бұрын
Below is a direct link to the package on our website for the full interior. If you are looking to purchase just the front upholstery feel free to give us a call at 866-639-7328 leatherseats.com/shop/special-deals/acura-special-deals/tl-packages/2004-2006-acura-tl-doeskin-pkg/
@bbeard3221 күн бұрын
Nice video with good detail. Though, the difference of volume between vocals and music is annoying.
@atreyac5384Ай бұрын
how long do these work without heating up?
@LeatherSeats24 күн бұрын
The ventilation unit TED device uses two semiconductors separated by two junctions to exhaust the heat created by the device through one junction and the cool air through another (called the Peltier effect), depending on what setting the unit is on (heat or cool). In theory, when installed properly the unit can run indefinitely without overheating.
@tjleland26707 күн бұрын
The system work great gets really cold and gets really hot Ford and GM and other factors use the same system
@jameslucas8230Ай бұрын
Where are you located
@LeatherSeatsАй бұрын
We are located in Oklahoma City, but we ship our product internationally. Feel free to call or email customer service if you have any product questions or would like help finding a local installer. 866-639-7328 or [email protected]
@GiveMeYoSammichАй бұрын
Is there anyway to use this system in 80s trucks with bench seats? I'm currently having a 86 gmc sierra 1500 get restored and plan on getting new seats for it.
@LeatherSeatsАй бұрын
These units are certainly a popular choice for resto-mod builds! Yes, it is possible to install these units in bench seats, as long as the new upholstery installed has perforated inserts with a reticulated (mesh) backing foam to allow the heated or cooled air to blow through the upholstery to your body. The only time these units can not be installed on a vehicle is if there is a surface-mounted occupancy sensor on a more modern application, or if there is not enough physical space to mount the system's components.
@dannymendezАй бұрын
Excellent....
@Soueu-uk6lxАй бұрын
👏👏👏👏👏
@RoshinycАй бұрын
Does the leather crack and flake like pu or faux leather or is it real leather ?
@LeatherSeatsАй бұрын
Our upholstery kits are typically ordered in a combination of real leather on the seating surfaces with matching automotive grade vinyl on the sides; however, we also offer a 100% Leather upgrade that has no vinyl on the upholstery. We have a 3 year/36k mile warranty on the materials and craftsmanship of all our interiors kits , and expect it to last for many years to come when cared for properly. Below is a link explaining our different leather content packages. Please feel free to give us a call directly to discuss your project. 866-639-7328: leatherseats.com/leatherseats-101/leather-content/
@sbrunette5335Ай бұрын
My vehicle next please
@rockod88802 ай бұрын
Great video, thank you
@turnerables2 ай бұрын
I think I need a set for my 87 4runner
@LeatherSeats2 ай бұрын
That would be an awesome upgrade in a 1st gen 4Runner!
@professionalchimp2 ай бұрын
Are these the same kits used on the new CAT D5 dozers?
@LeatherSeats2 ай бұрын
We're not sure, but that sounds like an awesome feature in heavy equipment!
@MiceliCreations2 ай бұрын
You put new seats in it? Looks good.
@LeatherSeats2 ай бұрын
We reupholstered them using our replacement upholstery kit. The original seats are still there, but with fresh upholstery!
@kbverse1456Ай бұрын
I need this for my tl
@jeremycole64502 ай бұрын
Is this easier to install if the seats already have the heating feature?
@LeatherSeats2 ай бұрын
It is more challenging since the original heating system must be removed from the seats before integrating this all-in-one heating/cooling unit.
@wes62692 ай бұрын
Yea awesome dude I totally have a 50000 dollar laser cutter at home!
@Jonathan-uv2sh2 ай бұрын
Awesome job! Where do you buy the black vinyl from?
@LeatherSeats2 ай бұрын
We offer our automotive grade vinyl on our website by the yard. You can check that out using the link below, or give us a call at 866-639-7328! leatherseats.com/shop/professional-upholstery-supplies/raw-materials-supplies/standard-vinyl/
@sergeygalkin45242 ай бұрын
Can I order it?
@LeatherSeats2 ай бұрын
Yes, you sure can! Feel free to call us at 866-NEW-SEAT to place an order!
@martinmg89473 ай бұрын
Hi Do you have in stock leather seat covers for the mk3 Supra?
@LeatherSeats3 ай бұрын
Hello! We build our MK3 Supra upholstery kits to order, and do not keep any in stock.
@Makhai8083 ай бұрын
What is leather care bundle
@LeatherSeats3 ай бұрын
The Sanctum Leather Care Bundle includes a 16oz bottle of Automotive Leather Cleaner and a 16oz bottle of Automotive Leather Protector. These products are designed increase the lifespan of your leather interior.
@welshimegs3 ай бұрын
I'm have to see about this in my kei truck🤔 it doesnt have ac and this would be the bomb if it would work
@LeatherSeats2 ай бұрын
That would be an awesome upgrade in a kei truck! This system is semi-universal, so as long as you have 12v power and upholster the seat to have perforated inserts with mesh backing foam, the system will work! Feel free to give one of our team members a call at 866-NEW-SEAT to discuss your project.
@cedricsimms66993 ай бұрын
The 6th generation Camaro headrests are removable. 😂
@matthewmartin95403 ай бұрын
Just installed mine, works great in my Mojave jeep. I added a wireless CarPlay dongle thing also so now all i do is get in and set my iPhone on charger and boom everything connects and charges wirelessly by the time I ready to pull out
@blindcrow39823 ай бұрын
it is ugly AF
@FRND233 ай бұрын
Do you guys offer the installation service? It’s too complicated for ppl like me
@LeatherSeats6 күн бұрын
We offer installation at our facility in here Oklahoma City, but if you're not local to us, email us at [email protected] and we can see if we have a recommended installer in your area.
@derekl1903 ай бұрын
Very helpful video. Just wondering if apply this would make the leather easier or hardly to wrinkle.
@LeatherSeats3 ай бұрын
The heat gun helps remove wrinkles from the leather when used properly.
@chase_t62443 ай бұрын
Great looking interior! I would have switched out six seats for five w a console. 👍
@Bvegaaaa3 ай бұрын
Beautifully done brother, hate seeing e30 interiors with wrinkles 😩
@apexheritage3 ай бұрын
I have a 1977 K5 Blazer with bucket seats. It needs all new seat covers and I want to integrate this system.
@LeatherSeats3 ай бұрын
We have plenty of customers integrate this unit into their classic builds. When having your new seat covers made, be sure they have perforated inserts with a mesh backing foam to allow the air from the system to blow through your new upholstery.
@davidlivingstain73063 ай бұрын
Thanks dude they really helped out a lot. Great video.
@gamesrecall33403 ай бұрын
what is the thickness of upholstry foam and what is the material of 2nd upholstry?
@LeatherSeats3 ай бұрын
In this video, we used 1/8" foam, our Dark Graphite vinyl, our T-1000 marking pen, DAP Weldwood Top and Trim Adhesive, and patterning chipboard.
@henrimcgowan55893 ай бұрын
What color stitching is used on this car?
@LeatherSeats3 ай бұрын
We used our "Pacific" color stitching on this interior. We have plenty of other colors to choose from as well!
@zr271cuda13 ай бұрын
Has anyone tried using this and adding a filler for the phone charger hole? Instead of cutting it out? I don’t like the charger and don’t use it I would like to just have a smooth center console lid.
@LeatherSeats3 ай бұрын
We haven't heard of this being done before, but theoretically, the cavity could be filled with something rigid and some foam that is a similar density to the rest of the console lid before upholstering it with our cover.
@user-ez5bj7qz8m3 ай бұрын
Address please
@LeatherSeats3 ай бұрын
We are located in OKC, but depending on what you're needing we can ship all over the world. Our website is www.leatherseats.com. You can also email requests to [email protected]