Nice call on the 275 70 17 choice. You had to go with tge LT C rated setup on that size too fight? I am preparing to mount the same size on a frontier with a 2 inch lift. If my math is right... maybe not even heat mods unless i opt for for some 1 inch spaces to bring the offset down to 6 vs 30.

BOOOOOOOO! You must be new here.

Do you still have this set up?

I have the same rack and tacoma, you think it'll fit on the new 2024 tacoma if I end up getting a new one?

I know I want the front seat jackers but im iffy on the back, do you think the seating position is considerably better with the back ones too?

“I think it’s a 6 inch zip tie.” Lol

Your honesty made subscribe immediately. Keep up the good work.

Any chance you might have the installation instructions? 4WP doesn't make these sliders anymore.

how accurate is your MF psi from the TPS gauge?? mine is about 2.5psi off from TPS

Just get a seat cover dude thats what i use in my taco and it works great

I know this is old, but can you fit a full size truck in this area?

best review / comparison I watched.

What year Tacoma and does it have any trailer brake controls?

11:46 that's my exact problem, and why I didn't get this rack, its very well made but just a bit too high to clear my garage door. Thanks for making this video!

I’ve been using them for years on my 4Runner. I replace them once a year. I don’t bother cleaning them sometimes you can use too much oil and clog up the sensors. Still cheaper than replacing regular filters 2 to 3 times a year when each cost 33 bucks.

What did you do to reattach the ebrake bracket?

I love Toyota Tacoma 3rd gen!!!

What size is that Tacoma?

I have round bars tho and I haven’t seen any videos about mounting it with round cross bars

It's nice to see a engine bay that looks like mine on youtube for a change.

Getting a Bundle on Eibach for my 16 Taco. Supporting it with 2in RC level kit and freedom off road uca. Can’t wait to get it installed

Holy Molle, good golly Ms Molle! Thanks for sharing install!

That’s just a poor design The definitely were made in China there are some nice things made in China but it definitely wasn’t those 💩💩 headlights

That might not work yeah that’s definitely not going to work that’s crazy you hit a puddle in the water gets it’s in there

Yeah I seen another guy with this problem there’s no way you could silicone around those areas and maybe the condensation won’t get in there I know it will be a pain in the ass to change your headlight bulbs after you do that so that didn’t work I would buy the LASFIT bulbs they have a two-year warranty I believe they’re actually a pretty and expensive company if you get the discounts on the bulbs oh one thing I like about the Lasfit are there fog light bulbs what is it called switch back they are white turn them off and turn them back on and then their orange

howzit brahda would this work for a first gen tacoma with a lo pro bed cover that rolls up the only thing i was wondering about was how i would put the side rails on since i dont have a track in my bed

How did you mount the shovel? I have the accessory mounts for my bodyarmor bed rack, it looks like you have clamps attached to the shovel?

These Toyota Tacoma trucks WILL NOT stop a 2000 LBS trailer during an emergency stop ask me I know my 2021 failed my truck was pushed hard by the trailer on flat level ground. After a pants change I went straight home got on Amazon and ordered a $50 plus brake control box plug and play. Took way less than 15 minutes to install.........one million percent difference LOL with clean drawers always now...

Thanks for posting, just finished this up installing the TRD lift kit and was very helpful for my first time. Finished the 2nd side in 26 minutes.

That's cool how there's a gap between your frame & the sumo spring because whatever you did to your suspenion, my truck is 🦴 stock just a little bit of heavy stuff in it but my frame is about 1/4 of an inch away from the sumo spring. I need to do the front now! But DAMN you are using the shit out of those things you smashed the sumo springs FLAT a couple times lol 👍👍 😳

Thanks dude that’s crazy that tacoma beast sells that light specially with all those problems I know that made you mad every time that happen 🤬😡 things like happens to head lights that are damage by rocks hitting the lights from driving and they will get damage over the years that’s why I see people put clear film on there lights to help protect them from that kinds of things Wrap there vehicles either in the same color or pick a different color or clear Hope you got some new ones that you really liked and had no more problems

I replaced my leafs outright cause I didn't want the factory leafs anymore. I went with the Icon rxt 3 stage leaf pack. I currently have them on option 3 and the truck rides like a dream. I also have ome 886 coils with bilstein 5100s all around. Overall, I have a modest 2 inch lift even with all the armor and bumpers I've added. My truck weighs in at 5400 lbs last I checked using a truck stop cat scale.

Wtf is up with your eyebrows? Great video

Link for the undercarriage trident spray nozzle?

The Gilulia, has the stigma of a wife's car or at least in European countries. Nonetheless, it certainly ain't Bro-ish!

Another useless video

I have the Wildpeak’s on my GMC Yukon 265/70/17 at 30,000 miles they are cupping on the inside of each tire and are getting loud with a groan sound. Most of my use is on highway. I will be replacing them with Michelin Defender LTX MS2 265/70R17 116T tires

Why is my 2023 Tacoma vibration at 60-70 miles a hour

Which do you think is great in over all.. Falken Wildpeak AT3W or Michelin CrossClimate2? for SUV.. Fair amount of snow. East Coasr

Nice video, did you ever consider doing Bilstien 5100s?

Did you sand the skid plate or use a good degreaser to remove the wax from the blue Wash & Wax. I would think with the skid plate having wax on it the paint wouldn’t bond to the metal as good. I mean looks good though.

Get better mounting hardware if you plan on using them as actual sliders the hardware they install with or come with is not good at all under sized and do not hold up

No way it fits

Is this Eibach stage 1 or stage 2 kit? I just ordered mine

If you don't mind me making a suggestion buy a cb mike mount rhat's what I use with my mxt 105

What are the bungees for?

Quick question. Is there a way to secure/lock the tent to the rack to prevent theft?

Nice! I'm going with the same set up. Body armor overland bed rack and roof top tent. Thanks for the content.

great video, what bed rack is that