Faux (fake) leather is pronounced “fow”, not “fox”. Perhaps you believe “Naugas” are real animals, or maybe patent leather cows? You can’t afford to sell Fox leather for this purpose.
@Ty-ck1jl10 күн бұрын
Thanks
@wedemeyerr11 күн бұрын
Thank you sooo much! Just finished the process 🙌! The hardest part was definitely to open the earphone!!! Greetings from germany 🇩🇪
@aymanayaz797112 күн бұрын
This video was a 10/10 on how clear it was which helped me repair this stupid issue by myself thank you! Originally I went to a few repair shops to see if they could fix this for me because I was to nervous but after countless repair shops not specialising in headphone repair I bit the bullet and ordered the parts and I'm so glad I committed to it. The amount of money I've saved because of this video is absolutely amazing and if your nervous judt think about the amount of money you will be saving. I think it's close to impossible to fail at this repair with how clear this video is 🙏🙏
@Altirix_12 күн бұрын
needs to be a class action to make sony pay for these earbuds after they pushed a firmware that essentially destroyed peoples batteries.
@kevinmcfarlane235118 күн бұрын
Excellent thank you! Good pacing, clear and easy to follow. Success!
@CentralSound14 күн бұрын
Glad it helped!
@Diiabeetuss18 күн бұрын
Thank you!!!! ❤
@CentralSound14 күн бұрын
You are so welcome!
@charly44ster19 күн бұрын
Very helpfull, thanks!
@TiaNessa.a19 күн бұрын
One of the screws are really stuck in the motherboard and won’t come out and is now eroded is there another way?
@smily_852419 күн бұрын
Thanx for good video 🤗save me for new headsett🤗
@ralphdesmond20 күн бұрын
HI @CentralSound and anyone else who knows about this: Can anyone offer me some advice please? I followed these great instructions and replaced the battery in my right bud (the only one with battery life issues). I did not end up disonnecting anything, just opened the case and carefully lifted everything off the battery, slipped in the new battery. I'm almost positive I can tell that the little thing is making electrical contact to the new battery because of how the lights behave when I put it in and out of the case. (with no battery, the lights do nothing). BUT I can't seem to get it to connect or do anything now. It doesn't announce battery level when I put it in my ear, and it doesn't pair. I tried both kinds of reset (In ears and in the case), and charged overnight. The other one still turns on and announces battery percentage, and I can chance noise cancelling settings, but it also does not pair. The one with new battery appears to do nothing except charge. Anybody know what else I can try ?? thanks for any ideas you might have :)
@MarushDenchev21 күн бұрын
Thank you very much for the video and for the parts. I was really sad when my right hinge broke. It took me around 30 minutes to fit the part and now I am with my favorite headset.
@lugodam21 күн бұрын
Thanks so much, for tihis video, excellent
@wesley150622 күн бұрын
Thanks by french baguette
@stan_de22 күн бұрын
I don't write comments too often, but here is a MUST! Thank you for this super tutorial, and especially for the hint with the clamper to open them up. Opening them could be the most difficult part for me and you easen my life. Respect!!!
@zainur-23 күн бұрын
Hello sir, my dumbass removed all the adhesive at 4:44, on the things that sticks to battery. Any idea what kind of adhesive that is and where usually can i find one?
@camilololor793323 күн бұрын
Is the same battery for wf1000xm3??
@24cull2423 күн бұрын
Aight, let me ne that one more comment that shares that this seemingly simple part has saved me +$100. And honestly, it helps trap the sound in the cuffs as well. I like that too.
@emperio141223 күн бұрын
Hello, thanks for your video is very useful. my ear pads fell off naturally , i got new ones from corsair but there's still the plastic of the old pads and i can't remove it... Do you have a solution for this ? I tried to twist the plastic but it doesn't move at all
@CubanVJ23 күн бұрын
Thanks for the video. This helped me take apart some Sony wh-c710n’s so I can put together a working set. Thanks!
@ralphdesmond23 күн бұрын
Great video !
@ralphdesmond23 күн бұрын
What do you recommend for a heat source for someone who needs to do this only once ? (that mini heatgun looks like fun though !)
@supposedtobesleeping24 күн бұрын
My hinge looks normal but my blue band has snapped, what do I do?
@Amelia7678624 күн бұрын
I have a question, what happens if the small wire breaks? And your left piece just comepletely falls off? Mine did and I didn’t even touch it. It was expensive and in freaking out. Can it still be fixed? Please help me!!
@16blacknoble25 күн бұрын
Thank You!!!!
@Carlos_Menor25 күн бұрын
Does the metal piece comes in the factory one??? Cuz mines didn’t brought one, and i purchased it at the store
@fernandokreutz0325 күн бұрын
It took me I think less than 10 minutes, REALLY surprised how easu it is to do it! On tip that I have is to pry the battery from the metal tab, that way the battery goes loose without removing the adhesive or the metal tab.
@TheEventGuy26 күн бұрын
My buds and my case were dead after a heavy rainstorm. Dried everything over night, pried open the case and unplugged the battery, waited a bit and plugged it back in and my case lit up again. Even my buds worked again after I put everything together. Glad it wasn't fully broken and I didn't have to replace anything. Good guide tho easy to follow.
@Spawny327 күн бұрын
Great guide. Doesn't help me unfortunately. Did everything the same way you did and similar videos I found. Tried a credit card to pry with. I can hear and feel all 4 clips unlock, but there's absolutely no movement. All I seem to be able to do is tear off the lid itself. Didn't have any trouble replacing the batteries in the earpieces themselves, had those 2 done within 10 minutes total. Oh well...
@exxosuk27 күн бұрын
Thank you!! So mad they broke so easily to start with!!
@mascot09s28 күн бұрын
Thank you!
@MrAnakin260329 күн бұрын
I was trying to put the pad back on for 2 days and i was on the verge on crying and then i googled your video and i did it the same way you did it and it worked holyfuck i regrget buying those headphones
@ChananIsraelАй бұрын
How long to ship to Canana?
@TristianMedinaАй бұрын
Thank you, you are my daddy🫡🫡🫡
@abdola-g6vАй бұрын
Man I was able to successfully finish this repair in 30 minutes, thanks to you.
@CentralSoundАй бұрын
Glad I could help
@ChickensAndGardeningАй бұрын
Thanks for this tutorial! The headband, unlike the ear pads, is not an intuitive replacement. And the original is stitched on so obviously can't be an exact replacement but this seems like a decent solution as long as the velcro stays closed.
@SparkyStarLPSАй бұрын
My Sony WH-1000XM4 headphone's Left hinge swivel broke today! I've had mine for 2 years. Praise the Lord you sell parts 🙏🙌 Thank you 😭💗
@kathrose336Ай бұрын
used a knife, hopefully i didn’t break anything! thanks for the vid, very helpful
@UNDEADASSASSIN32Ай бұрын
Super helpful thank you
@CentralSoundАй бұрын
Glad it was helpful!
@--2232Ай бұрын
clutches video i've needed in a while. thanks!
@CentralSoundАй бұрын
Glad to help!
@Damike-_1Ай бұрын
so sad , i can’t do this
@tyfly86Ай бұрын
dropped a like, for the life of me couldnt figure this out lol
@rushyashringaАй бұрын
Very useful tip ❤
@CentralSoundАй бұрын
Glad you think so!
@srq_TomАй бұрын
The stock ear pads are glued to a plastic frame. In my case the adhesive was so worn down that the stock pads just separated from the frame. Took me a minute to figure out that I had to twist that frame off. The replacement pads weren't that hard to twist into place, but I am pretty strong. The left one was harder due to microphone being on that side, but i got it into place. It's a bit of work, but much better and cheaper than buying a whole new headset just because the pads wore out.
@HalochibiАй бұрын
Just bought this, my left swivel broke on Thursday, parts arrived today, I followed the video and replaced the swivel without too much of a hassle. Thank you for the video!
@CentralSoundАй бұрын
Nice work!
@saadmirza2727Ай бұрын
I would strongly recommend against replacing the scrim mat if yours is is fine shape. My double sided tape was almost impossible to remove the backer without removing the whole tape. It was time consuming to remove the glue residue from the old scrim mats. And worse still, I installed the new scrim mat slightly misaligned, causing it to be wrinkled. If I had replaced just the cushions in the clip, it would have taken 1/5 of the time.
@meitoliАй бұрын
You are mastaaaaaa !!! I hope that works for me. Just ordering the battery tomorrow and will take some days to arrive at Quito but I will try!
@kbaАй бұрын
Is the ear pads the same size for Arctis 1 and 7?
@marcop.525Ай бұрын
This is gold 🪙🥇
@mangddgАй бұрын
Whenever i forget the " how to put the earpad" i always come back to this video. Thanks sir!