Tesla Cybertruck
0:11
4 жыл бұрын
Пікірлер
@atticusrussell1225
@atticusrussell1225 14 күн бұрын
Thank you so much for the wrench trick! Different size bolt (14) on a 15 Si, but saved me
@youngkingchannel867
@youngkingchannel867 16 күн бұрын
Hey man, this video was great it helped me change my alternator, which seems like it went bad...detail video preciate
@ConstructionNerd
@ConstructionNerd 24 күн бұрын
Just did this using this video to guide me. Word of advice, my part did not come with the shield to the right that holds the wire. You're better off attaching that to the new alternator before anything else, or else it's more of a pain to reach the bolts.
@youngkingchannel867
@youngkingchannel867 16 күн бұрын
Thank for this it was helpful when I changed mine
@robertoalquicira3041
@robertoalquicira3041 Ай бұрын
Thank you dear friend…it helped me a lot!!!
@milliem8051
@milliem8051 Ай бұрын
Can you heat acetone like run warm water over the bottle? I heard it works better to get gel polish off if it’s heated up
@DeancentGarage
@DeancentGarage Ай бұрын
That I have no idea about but I do know heat from water certainly won't cause it to ignite.
@Stickiestboi
@Stickiestboi Ай бұрын
Heat will make it even more volatile which makes it easier to ignite
@TheTomar33
@TheTomar33 2 ай бұрын
Great video
@Krack2805
@Krack2805 2 ай бұрын
you need to pour at near the same time or the volatility difference will come into play more... no? though its clear ace is way volatile lol
@happycampersminnesota7526
@happycampersminnesota7526 2 ай бұрын
Do I need to have the key switch on?
@DeancentGarage
@DeancentGarage 2 ай бұрын
If you're applying external power the pump it will be completely independant of the cars electrical system. So no, the key position will not matter.
@Harmitron
@Harmitron 3 ай бұрын
Very helpful thank you
@DeancentGarage
@DeancentGarage 3 ай бұрын
Glad to hear it helped you!
@KILLAWATTS804
@KILLAWATTS804 3 ай бұрын
I have an 05 ram and the grille is connected to the hood. Would you still recommend the grille with the LEDS?
@DeancentGarage
@DeancentGarage 3 ай бұрын
If they make a grill for that ram I don't see why not. Wiring will be a bit more tricky as you'll to run it in or mounted to to the hood.
@godwinjoy9730
@godwinjoy9730 4 ай бұрын
Hey thanks for the great video. So I have a question. Recently my Honda civic 2012 just stopped working out of the blue. It struggled to start for a few times this morning but refused to start on the third time today. However while the car refused to start, all my electrical continued to work (AC/Radio/Lights etc). I tried getting a battery jump start but it didn’t seem to work. The battery is supposed to be in relatively good health (I had a test done a month ago). I have a sneaking suspicion it is either my alternator or starting motor that’s the issue. Do you have any tips to closer pinpoint which of these two could be causing my electrical issues? When I trying to turn on the car with battery jump start, I hear a very quiet “whirring sound” but no start. I am also in the process of getting a voltmeter and car code reader computer. Any insight would be greatly appreciated. Also what length bungee cord did you use to hold your belt? Thanks again for the informative video!
@DeancentGarage
@DeancentGarage 4 ай бұрын
Hey godwinjoy, it's very difficult to troubleshoot over the internet. From what you're describing it would lead me toward the alternator or stater as you said. I suggest watching a couple starter motor Troubleshooting videos to see if the symptoms are similar to yours. I didn't measure the bungee cord, I had a multi pack and grabbed one that was a bit shorter than needed when relaxed so that when stretched it provided tension to hold the belt on the pulleys/rollers. You Could measure from the hood where I hooked mine to the belt and then deduct 3-4 inches from the measurememt to get an idea of the bungee cord length needed. Good luck!
@godwinjoy9730
@godwinjoy9730 Ай бұрын
@@DeancentGarage sorry for the late response but it ended up being the starter. The most hassle I’ve ever dealt with for a $100 part. Thank you though.
@DeancentGarage
@DeancentGarage Ай бұрын
Happy to hear you got it figured out!
@collinklitz7434
@collinklitz7434 4 ай бұрын
Hey do you still have the tune file for it?
@DeancentGarage
@DeancentGarage 4 ай бұрын
I didn't tune these vehicles. Just recorded the dyno runs.
@ScrappyLeech
@ScrappyLeech 4 ай бұрын
Hey Dave, thanks for posting this video. I used it to help me replace the alternator on my 2014 Honda Civic. I struggled a bit with my low quality hand tools, but I got the job done. Thank you.
@DeancentGarage
@DeancentGarage 4 ай бұрын
Awesome to hear, congrats! Good tools certainly help make the job easier.
@rune20401
@rune20401 4 ай бұрын
Thanks 😊
@DeancentGarage
@DeancentGarage 4 ай бұрын
You're welcome!
@dylan4413
@dylan4413 4 ай бұрын
Canadian!
@DeancentGarage
@DeancentGarage 4 ай бұрын
How could you tell? 😂
@dylan4413
@dylan4413 4 ай бұрын
@@DeancentGarage “out”
@LetMeSayIt444you
@LetMeSayIt444you 4 ай бұрын
So happy this was experimented and recorded before I just did what I was thinking lmao Safety first 💫
@BSevenly
@BSevenly 5 ай бұрын
is the truck leveled or lifted? if so what size? and also interested in what tire and rim size you have on. I like the stance and height on it! grille is sick also
@DeancentGarage
@DeancentGarage 5 ай бұрын
Truck is leveled on Bilstein 5100s, they're adjustable shocks and if I remember correctly I set it either to the second highest or second lowest setting. There's info online on which setting to set to, to level the truck. Tires are 35" mud terrains on 17" rims. Appreciate it man 🤙
@BSevenly
@BSevenly 5 ай бұрын
@@DeancentGarage thanks! love it!
@glow9999
@glow9999 5 ай бұрын
Hello. Yes, this works. I installed this in 2021, and no leaks. You did the same thing, I did: coat hanger and all; except I didn't have a car lift. I had jack stands and removed the rear right tire for access.
@DoubleAboveChaos
@DoubleAboveChaos 6 ай бұрын
My First House Fire was my own started by Acetone and a candle, my younger sisters were playing and doing their nails and Poof....followed by a scream of Daddy. with me and my dad being with the fire Department we were able to get it out without having to call in half of the County Fire Departments
@DeancentGarage
@DeancentGarage 6 ай бұрын
Damn, you guys are lucky you had the training to put it out quickly. Likely would have been bad otherwise.
@DoubleAboveChaos
@DoubleAboveChaos 6 ай бұрын
dad threw a bucket of water on it as I ran for the water hose
@Eli_is_a_Lauver
@Eli_is_a_Lauver 6 ай бұрын
Excellent job
@mr.noneyabidness
@mr.noneyabidness 7 ай бұрын
I have a stupid question. That just flashes the FOB, and not the whole PCM, correct?
@n--r--s--7___9___6
@n--r--s--7___9___6 7 ай бұрын
😮 meraviglioso camion
@BSKRBlitzkrieg
@BSKRBlitzkrieg 7 ай бұрын
Appreciate the video, ordered one after watching this, mine came in and it’s true took like maybe a couple minutes to hook up and program after buying it already flash programmed to my truck.
@CbrF4i600cc
@CbrF4i600cc 8 ай бұрын
I guess it beats the ridgeline
@1991tommygun
@1991tommygun 8 ай бұрын
What ever happened to this car
@DeancentGarage
@DeancentGarage 7 ай бұрын
I couldn't tell you, wasn't my car. I have my guesses though considering 90% of j-bodies are no longer on the road.
@djmjr77
@djmjr77 8 ай бұрын
Just an FYI, since the fuel strainer is problematic to remove sometimes, you can actually check its cleanliness from the top when the fuel level/pressure sender is taken out..
@DeancentGarage
@DeancentGarage 7 ай бұрын
Absolutely can. That will make it alot more challenging to clean out the tank fully of any potential sludge that has formed from sitting.
@luxurydj6277
@luxurydj6277 8 ай бұрын
Hello what is you plan to install a push button start on it can you still make this installation or would it be advisable to do it after you’ve installed the push button
@Deaf_Notes
@Deaf_Notes 8 ай бұрын
Hey any tips on simple bolt ons for a stock L61 2.2L ecotec, I have a 03 sunfire I want to get a little more power out of without any difficult modifications since im still a novice when it comes to modding cars.
@eddiepan6524
@eddiepan6524 8 ай бұрын
I am going to wait until the tailgate ramp gets into production on the next generation trucks
@patentjohntran1283
@patentjohntran1283 8 ай бұрын
ur gonna be waiting a long time then 😂
@shaquanscott7043
@shaquanscott7043 8 ай бұрын
I bought this product and installed it today without issue, thanks to your video! I was curious what you would say is it's maximum range in your experience?
@DeancentGarage
@DeancentGarage 7 ай бұрын
Glad to hear you're install went smoothly! Typical range with the factory fob with a clear line of sight is probably around 300ft.
@jeffreylightbourn9445
@jeffreylightbourn9445 8 ай бұрын
Where is this ramp in the vehicle that was just released?
@HwangInhoBooNam
@HwangInhoBooNam 8 ай бұрын
Non-exist
@TheBoxster1998
@TheBoxster1998 7 ай бұрын
You pay extra 20k…😂😂😂
@highbrass7563
@highbrass7563 8 ай бұрын
Hahahahaha
@highbrass7563
@highbrass7563 8 ай бұрын
Absolutely wild
@DeancentGarage
@DeancentGarage 7 ай бұрын
Not bad for a small 2.2L 13 years ago.
@user-zv2xw6mj1b
@user-zv2xw6mj1b 8 ай бұрын
Badass
@Tom-bn8ok
@Tom-bn8ok 8 ай бұрын
Absolutely fantastic
@MofosRealReviews
@MofosRealReviews 9 ай бұрын
Matt Heafy is that you???
@abymondesir23
@abymondesir23 9 ай бұрын
Hell yeah
@CodyGamerFan16
@CodyGamerFan16 10 ай бұрын
This Is So Cool
@EFT351
@EFT351 Жыл бұрын
Did a peel fit there
@julianchavez8357
@julianchavez8357 Жыл бұрын
Good video bro thanks
@jackcourtney9120
@jackcourtney9120 Жыл бұрын
What fuel pump did you end up getting? I need to replace mine as well and it is making about 310 hp.
@terencebrown1754
@terencebrown1754 Жыл бұрын
Also useful for the 968. Thanks for posting
@LoochieSpankinDebbies
@LoochieSpankinDebbies Жыл бұрын
Wat website from you buy it
@DeancentGarage
@DeancentGarage Жыл бұрын
Links are in the description 🤙
@Dobbs3
@Dobbs3 Жыл бұрын
This guy is on TikTok defending pedophilia. Pos
@DeancentGarage
@DeancentGarage Жыл бұрын
Hey guys, just wanted to make an important update on this video. The JB waterweld did not up and I developed a leak again. I just posted a new video on the ultimate fix that will stop the leak from the fuel strainer opening once and for all. Check it out 👉kzfaq.info/get/bejne/o8VzaamYusyWpqM.html
@87_951
@87_951 Жыл бұрын
I can't believe Porsche ran the fuel lines just willy nilly exposed on the pan and then right over the exhaust headers (but I guess this last one doesn't surprise me). Anytime I've ever had to run new fuel lines for whatever reason, always tucked in the frame rail or something so it can't easily be beaten or smashed by debris, etc.
@saiii777
@saiii777 Жыл бұрын
😍😍😍😍🍷
@brandorudy_9597
@brandorudy_9597 Жыл бұрын
How does it work after 2 years? I'm looking to buy this one