❤❤❤ WOW !!! GENESIS " ABACAB" ON HEBREW "AB" 17TH , 2024

Lasonic TRC-931 was built right back then even though it was a cheap brand but became so popular and it's why it's worth alot.

Great head unit I had one with the cd changer in a 87 Grand AM. I'm hard of hearing now to say the least. Lol

How do you tell which caps are bad? Esr meter or ohm meter?

I have the exact same issue here with my MDP-600. After I changed my caps on the power supply board, the unit doesn’t get power. I am searching around the board to see if I desoldered something else by mistake but anyone else have this issue?

When the capstan assembly was out, did you notice how to loosen the tape guides slightly in order to rotate them 90 degrees or so? My deck has obvious tape wear pattern and want to turn the guides just a bit to new rounded metal. I am sending my heads out to JRF Magnetics for reconditioning, so I want to expose new tape guide smooth surface on the guides when the head block is reinstalled. Also, do the capstan spindles and flywheel assemblies simply push out of the bearings of the chassis? I am thinking that just behind the flywheels are the screws that secure the tape guides. Thanks - great video series!

Rush 2112, that brings back old memories!!!!

i got the fisher dd-280 plays for a few seconds and stops hope you can help me thanks

Thanks for the great video. What cords did you need to plug this into a modern tv with hdmi cables?

I just got one and it won’t show the pictures it has an antena on the thorp and I added mine also in the back and it still don’t work how can I fix it ?

Heyo! I have an issue with mine where the heads don’t even engage. The left side makes noise (if you use FF/RW it makes it but faster) and won’t engage the heads, while the right side makes no sound but doesn’t engage the heads at all. I’m thinking it’s either a belt or a broken gear. I can provide videos if you wish.

I have the same unit. It does right when it goes right Super finiky

I copied this repair exactly and my receiver is alive again! Same popping and crackling, Thanks a lot for this video.😁🔊

The 2 I have are VSX-D704S and VSX-524K. The 704 was repaired 3 months after purchase. About 5 years later all it does is blow the fuze. The 524 I bought used I had for 2 months. It was working fine until I hooked up a center speaker. It did have an issue where it would struggle to power on. Click on click off. 2 days after playing the center channel it turns on thencright off. I plan to repair both of these but im still in the learning process. Thats why I watch these videos.

It was a pleasure watching this. I have 2 Pioneers that are down.

I just love the face fwd cassette decks. Only ones I knew that did this was the 80’s and some 90’s Delco Electronics for GM before they moved it to a side slot system. But if this was a car stereo, Where do you install this? So many units here, this is more than a single or double din system

hello! I have one of these at home, but it turns on and off after a few seconds, and it's scary looking at these multiple plates. any answer as to what the defect could be?

Looking for external antenna for icf 2010

How to get to the mode/cam switch on this mechanism?

Excelente reparación, increíble como una BANDA o un simple componente puede causar un gran PROBLEMA hooooo 🤔👏👏👍

This model is good to music?

I have one of these in my eBay cart at present and I’ve been dithering whether or not I should buy it. I’m also not sure if there is a light behind the cassette in the cassette well. For a person who hardly does any recording on cassettes anymore, would you suggest that I should buy it - it being a very “delicate” NAK and exceedingly difficult to service. At present I have a NAK CR2E and want to upgrade to a 3 head machine. Incidentally, a great, well-explained video.

Worst KZfaq video I’ve ever seen!

Hi Mark , I seen one of your replies and would like to know If you can repair the my 2 units and how much would it cost . I don't think I have quite the skill to get them up and running

I have 2 of these units and want to replace their batteries. I have one torn down and need to know where I can acquire the batteries . I've owned these for the past 18 yrs and have not seen any facts about them , nor repair info . And you dear sir thanks for what you have done to put this unit back into service . Any info where to get the batteries will be greatly appreciated , thanks . I also own a new in box car DSP unit, a new in box 12 disc changer, a new in box pull out am/fm cassette deck with the matching amp unit bracket , a new in box flush mount 3 way speaker set and a new in box door mount 3 inch speaker set. I love collecting any of this stuff I can get my hands on and they just keep getting almost impossible to find to purchase..... Panasonic only produced these for 1989 .

24:59 AZIMUTH IS OFF A TINY. YOU SHOULD ADJUST IT

I used to sell JVC car stereos starting in the late 80s until about 2001. The KS-R150 was the lowest model that I kept in stock and I sold many of them. Thank you for the video.

Is it a 4v or 2v Preout ?

Amazing solo on that track! Rock on brother! \w/

Tradúcelo por favor😢

how much would these be worth?

Ive got 2 one had since 79-80 for my first stereo for my birthday.The other picked up at junk store.lived 2hrs from pitts airport and could here planes talking.. pretty cool. Blasted Judis Preist Headin out to the highway..neighbors all around loved me..

what would cause a scratchy master volume? Found this amp but has that issue.

I like your videos but please stop with the “pick up” comment it is so annoying every time “let’s pick up” please stop that

I rescued one just like this and I was hoping to resell it. Issue is that the tray doesn’t spin and the player itself doesn’t go into the rest position (maybe it has to do with the tray). Is it just a belt replacement?

Have a stack of factory Jeep Cherokee cassette players from 88-92 that need repairing. Did one repair myself by taking a good tape module out of a bad channel case and dropping it into a good left/right channel case. Need to know what is the cause of either the left or right channel going out in a couple of cases and one that has just slightly low volume with the vol knob maxed out. One has a high squeal thru speakers with no am/fm reception. The rest have faulty tape modules that will not draw the tape in and seat down in position. Can hear motor running. When you push tape in you have to pull tape out with needle nose pliers.

😂🎉😂 Are we able to locate a service manual for this EQ.

How much is one of these worth currently? just found a one in good nick at my old garage

Had to watch. Just got one at a church fundraiser sale. Along with many Scotch 215, 150 and 203. Of course I can’t take the genre, so lots of recording to do. Oh, and the deck works perfectly. Looks like I may have to look at a manual on hifi engine. Unless you are supposed to remove the take up reel to record on side two. It doesn’t do that on its own.

Hola mi amigo, Sabes cómo reiniciar de fabrica un reproductor CDP-308ESD Ya no quiere reproducir, solo apareció en el display "DISC MEMO". SABES COMO BORRAR ESTO?

I remember those. Quite nice tuner section. Good price/performance ratio too. Seems like the EQ-presets is set like I used to in my younger days - boosting bass & treble ;-)

Do they use that glue in newer units as well. Like I have an onkyo should I be prepared for this to happen in the future.

Is there a video on preamp repair.

History of the unit, technical repair details and even solder/desolder work. Love your repair videos!!

I'm born in 1981, cool band.

Nice repair and maintenance. That brown glue is bad news. As you noted it is corrosive and can also become conductive. I did a Proton D940 repair video that involved brown glue and damaged components and odd behavior of the tuner because of the glue. Check out the Hakko FR-301 desoldering tool if you need that capability. I use it all the time and it is awesome, tips last forever.

Thanks for your time on this one; that circuit glue is really deadly over a period of time. Another piece saved from recycle!

When power up with a Variac a digital circuit may not start up. It may need fast power up to initiate.

If your friend doesn't want it back, find a pair of Infinity RS6b speakers to combine with it. Then set it up somewhere in the house... Anyway, looks like a nice unit. Compares well to the Sony STR-AV910 from 1989-90, minus the surround channels and 30WPC extra that the Sony has.

On through the night!