Try different canbus setting: kzfaq.info/get/bejne/l8WCjL2SzNSyqHk.html Good luck, hope it helps

I'm so glad to hear that, thank you !

🤣 haha!

I think we used between 10-20 bags. I forget what size the bags were, but the "normal" size bags of leveling sand from the hardware store. The goal is to use as little sand as possible, but it doesn't go as far as you'd think! Good luck, you're going to like your pool 👍

Glad it helped! 😁

Thanks! For my schedule, I like to run for 12 hrs per day. I've played with it a bit, and seems to work best for me to run the pump primarily during the day. So from 8am to 8pm works pretty well. If you're using a timer like this one, then you can get fancier, like 2 hrs on, 1 hr off, etc.. the benefit of this is to keep the water stirred up more often to discourage algae growth. It is good to recirculate 90% of your water per day, which corresponds roughly to 2.5 turnovers per day. To calculate your turnover rate more accurately, there is a calculator here: poolsforfools.com/pool-volume-calculator-and-pump-size/ I hope this helps!

@@PracticalMechanic Omg!! Thank you SO MUCH for explaining 😍 I can finally wrap my head around this. I was wondering why I had problem with algae. Sounds like I need to turn my pump on more often. Makes total sense because I was only running for a couple hours a day. Ahhhhhh. Got it!!! Thank you again 😊

Just the balls that came with it. You can do either or.

Thank you so much you’re awesome!

@haileygingery1468 thanks!

One example would be if/when you want to clean or change the filter media, you would shut this port so that you can disconnect the reservoir without draining water from the pool.

Yes. If you use a garden hose going to your spigot. As an alternative, you can attach it to the drain port (D), and set the pump to drain. Then you are just recirculating the water. This method requires a proper adapter from the drain port to your hose. Good luck, hope it helps.

@@PracticalMechanic thank you your video was very helpful and your reply as well

No problem, have a great rest of your summer! 🌞

You're welcome, 👍

That's great to hear! Good luck, and thanks for the feedback! 👍

You're welcome, glad it helped!

Good to know

Welcome, glad it helped

Thanks, much appreciated! One thing just to double check is that the rubber gasket is still there. You can catch a glimpse of it in this video at about 3:15 kzfaq.info/get/bejne/hMefhN1oxJymh5c.htmlshared&t=190 Good luck!

Thank you, very much appreciated 👍. Hope you have a great summer!

@@PracticalMechanic thanks to you we will 😊

Hmm. Maybe double check that the plugs have been removed from the inlet ports, check the tubes for clogs (like a sucked up dryer sheet or leaves), also check that the "crown" valve on the top of the output jet is fully rotated to "unlock" position. Good luck, 👍

Glad to help!

This radio doesn't fit quite right in diesel versions or versions that originally had a navigation system in them. Could be what they were referring to.

@@PracticalMechanic okay thanks, mine is just a 05 EX, original radio doesn't have navigation and no diesel,

True! 👍

Thank you!

Glad you like them!

Yes, you can! When buying the bulb, choose the color based on the "temperature" which is referred to in terms of Kelvin, or "K." Yellow lights are around 3000K, white is around 5000K, and blue lights are around 8000K. Here are a few examples: 4100K - amzn.to/3zJF1Mo 6000K - amzn.to/4feIwL1

You are a wonderful person, thank you! 🙂

I go into a GFI outlet, but I wanted to be able to set the pool pump on a timer, so went through a wifi enabled smart plug first. The problem with this method was that it would trip the GFI on the plug. I made a video on that here: kzfaq.info/get/bejne/pJebiLaIlbKoeqc.html

No, dejo mi piscina montada incluso en invierno. Dreno el nivel del agua por debajo de los puertos de entrada y salida, y llevo la bomba y los tubos al interior. Se forma una capa de hielo en la parte superior, pero se cura bien.

You're welcome, glad it helped. Have a great summer!

I think, over time, the amount of sand making it through the filter will reduce. You could also try larger sand particles. But if you want to remove it, it is not that difficult. Follow the steps in this video: kzfaq.info/get/bejne/hJqXZ9ekmb6XcXk.html Good luck, hope it helps! 👍

@@PracticalMechanic Thank you for your answer!! I will give a try!

Sounds good, all the best! 🙂

🤣This guy gets it! 😂

Thanks, I haven't heard from Bestway yet...! 🤣 Glad it helped you, have a great summer!

Seriously 😅 the best way video I found was highly uninformative

Couldn't agree more!! This was a lifesaver!