How do you expose it correctly say during sunrise or sunset? Or if I’m filming wildlife? I struggle with this. If I set my shutter to double the frame rate and base iso at 800 and my aperture wide open it will come out under exposed. So I will turn the iso up and it seems to add noise in the shadows. I’m not sure what to do about this. Can anyone offer some advice? Thanks
@barry10ish2 күн бұрын
why do you morons play music while you are talking F-ing idiots.
@CrYsTaLySeR3 күн бұрын
very nice tips & easy to understand! 🥰🥰🥰
@raadshed61946 күн бұрын
Thank you, all my respect.. please continue 😎
@TopTierTV958 күн бұрын
Sponsored by Coke? Lol
@Phoenixfilms.photos10 күн бұрын
👏
@PracticingPhotography13 күн бұрын
I just added eye focus to my star button. I cannot wait to try it out.
@davidallen667714 күн бұрын
Great video Per, I wish I found you earlier
@elijahmant285515 күн бұрын
Interesting and nicely presented video, Man. I have a question. I hope you will reply?. I set my canon up for video use. Set the dial on the left. I think it's called : Aperture to : 1/50. F- stop to : 5.6. ISO : 100-ish. Sometimes there isn't enough light. So I raise the ISO. But the 1/50, changes. It won't stay 1/50, as I had set it previously. Is this normal? Can I record with the higher 1/50 for video and it be stable?
@sewhidbey17 күн бұрын
Excellent instruction-though it was confusing as the speaker seemed to say “out of focus’ instead of “auto focus.”
@withintheroots.19 күн бұрын
Would you happen to know how to be able to use the record button on the ATOMOS ninja ultra with a Fujifilm xh2s? I can’t seem to figure it out
@photoguy421221 күн бұрын
This camera is incredible. Just sold my Sony A7R2 and this looks like the replacement.
@persvanstrom19 күн бұрын
Love my R6s, welcome 💪
@DESIJEHASHAYAR22 күн бұрын
Good information mate. Cheers
@persvanstrom19 күн бұрын
Glad I can be of help. Tyvm for kind feedback ❤️
@spielberg66TC25 күн бұрын
This was really useful, thx
@persvanstrom19 күн бұрын
My pleasure
@prayogoputra__26 күн бұрын
Worth to subscribe! Bcause u always answers all of the question below more than the brand CS Lol.. superhelpfullll dude!!!
@persvanstrom19 күн бұрын
I try my best and comments like yours make me so proud and grateful. Thank you 🙏❤️
@merchantsmithimages29 күн бұрын
Canon knew these were overheating during the development stages. Back to the Product/Service Management stage! I'm a fan of Canon, but this is unacceptable. #Recall
@persvanstrom19 күн бұрын
Always a trade off for weather seals and heat and size, but I feel you
@tomn6099Ай бұрын
Hello Per, I've had an R6 for over a year now but haven't used it for video that much. I recently volunteered to record a kids' event consisting of 5-7 min dances. Due to poor lighting I ended up using ISO between 1250 and 6400. Once I got home I found 5 annoying hot pixels in most of my clips. Reading online, this seems normal/expected and I get the feeling there is no reason to consider it broken... For photography it is fairly easy to deal with but how do you deal with hot pixels in video? Being a hobbyist, I usually stick to open-source software and have been using ShotCut recently. They have a spot remover filter but it is quite annoying to use. Perhaps there are better ways?
@persvanstrom19 күн бұрын
I would def contact Canon. Should not be hot pixels. Other than that, you already do what you can, post fixing
@AndreaRushton-r3oАй бұрын
Brilliant! Thank you for this, I just learned so much in such a short burst you've helped me with things I've been battling with for years.
@persvanstrom19 күн бұрын
That makes me more happy than you can imagine. Thank you for sharing ❤️
@oscarvidalstudioАй бұрын
Now I know I know nothing about video recording
@persvanstrom19 күн бұрын
Awww 🥰 you know plenty ❤️ I always feel like I don’t know enough, but think it’s just part of us knowledge hungry minds 😘👍
@ChefEleenАй бұрын
Why does the black color appear with white dots? Is this due to low lighting, and what is better in the studio bt2020?
@elliliveswhereАй бұрын
I went looking for the Amazon Affiliate links in your write up however cant see any there. If not already highly recommend getting on that to make some commissions :)
@laurliftsАй бұрын
can you do this on the r50 too?
@persvanstrom19 күн бұрын
Don’t own one, but will see what I can do. @canonnordic care to lend me one? 😅
@fulviobiavaschi15Ай бұрын
A really great content!
@persvanstrom19 күн бұрын
Thank you 🙏 much appreciated
@lintoncoke5094Ай бұрын
Love your info, thanks so much. What is the purpose of cage around your camera?
@persvanstrom19 күн бұрын
Thank you 🙏❤️ Cage is two parts. Primary it’s for mounting points. Cage makes it possible to rig a camera (video in the making). A side effect is that it also protects the camera a little better Downside is added weight and size
@TechFacilLucasАй бұрын
How do we deal with ISO noise at 800. In a well iluminated video. It happens that the black areas still have noise.
@persvanstrom19 күн бұрын
If it’s well luminared it shouldn’t have that much noise. Could go ISO400 or it’s only post processing NR
@TechFacilLucas19 күн бұрын
@persvanstrom It allows to go to down to ISO 400 and 100. But it shows a message that choosing these, there will have an impact o image quality.
@persvanstrom18 күн бұрын
@@TechFacilLucasit doesn’t if lighting allows it
@kevinmcintosh648Ай бұрын
Wonderful video!! Very informative and easy to understand. I am now following you! 😊
@persvanstrom19 күн бұрын
Thank you 🙏❤️
@williamhestermedia5084Ай бұрын
You are the man. I was about to sell my Ninja because it would not record to camera and ninja. Canon is so wishy washy in the menus. When I shot sony it was straight forward. Thanks so much.
@persvanstrom19 күн бұрын
My pleasure and thank you 🙏❤️
@artby_marte2 ай бұрын
Du er veldig flink til å forklare😊
@persvanstrom19 күн бұрын
Tack så mycket ❤️🙏
@DrinkingWithDrewShow2 ай бұрын
What battery are you using? I cannot get any power to my Ninja. The battery pack I’m using isn’t powering it up for some reason.
@persvanstrom19 күн бұрын
I mostly use power cable when I use my Ninja. Got a few original NPF that works Atomos power addition
@Miria_lima2 ай бұрын
Thanks for the video! So, is it true that is there a limited time of 25 minutes to shoot 4k 60fps? Did you have any overheating problems shooting 4k 60fps?
@AnasChemmala20 күн бұрын
I use RR for videos and yes it overheats sometimes even lesser than 25 minutes depends on the temperature where you’re. I was shooting in a around 30 Celsius room and camera overheated at 18 minutes
@persvanstrom19 күн бұрын
30min hard limit. Not heat related but a hardware lock
@Mufasa_Shabazz2 ай бұрын
Do you have a reccomendation. Everytime i've shopped for one it was too expensive for me.
@persvanstrom19 күн бұрын
They are silly expensive unfortunately. I think the c800 is a great spectrometer. If you don’t need color, a regular light meter will be just fine
@Mufasa_Shabazz2 ай бұрын
I noticed that you lowered the iso to 400 and changed the aperture to F4.0 on the final test that worked out. Did that have something to do with it? was there a reason you did that?
@persvanstrom19 күн бұрын
It’s just an error on the footage I used (yeah stupid mistake) but for the actual test it’s all the same settings
@251photographystudio2 ай бұрын
Great Video, as a side note, this amazing feature is also available with Canon EOS RP, so I am guessing it is also available with any camera of Canon's that has both AF ON button on the back and eye detection. I set mine up the same way after watching this video. AF ON normal and * set to eye outfocus. I imagine this will be very helpful in the future as this was a conundrum of mine having to switch between the two during shooting
@persvanstrom19 күн бұрын
Great info 💪
@Kinan_a.m2 ай бұрын
Is it Usefull to use a use defined profile and setting everything to the lowest number, Contrast, Sharpnes.. etc?
@persvanstrom19 күн бұрын
Depends on what you’re after
@raynaramsay2 ай бұрын
Thanks, very useful
@persvanstrom19 күн бұрын
Tyvm 👍
@francesremo2 ай бұрын
how much zebra patterns do i have to watch out for? does it have to cover all parts of my face?
@persvanstrom19 күн бұрын
It is all of those annoying answers where I have to say it depends. ☺️ decide where on your face you want a matching exposure and then look for zebra patterns on that spot. Usually I find that 40 to 60% off my face on the light side will be covered.
@Robert-uo6iu2 ай бұрын
Hello Per. Did you make this video with Canon EOS R6? If yes, what video settings did you use here? This footage has fantastic colour and sharpness
@LetsTalkNowYouTube2 ай бұрын
NINJA 5❌NIANA 5✅
@persvanstrom19 күн бұрын
🥹
@prayogoputra__2 ай бұрын
I dont know why, but i always have color shifting issue with c-log3.. shifting red to much orange/warm. Especially skin tone.. so i decide to shoot natural profile -_- Do u hv an idea ?
@persvanstrom19 күн бұрын
I would check my white balance. Canon is a little red, but shouldn’t alter between profiles. If you convert to 709 with a LUT, I would try another LUT or convert manually
@DK-ds3em2 ай бұрын
So basically i will have to buy the battery and leave the screen disabled but keeps it open and buy the ninja screen yeah ?
@persvanstrom2 ай бұрын
Basically yeah, but I don’t like to recommend any new purchases. Do you need more than 30min? I had my R6 with this setup overheating by turning (waking up) on camera monitor while filming. Nothing is bulletproof unfortunately
@persvanstrom2 ай бұрын
Basically yeah, but I don’t like to recommend any new purchases. Do you need more than 30min? I had my R6 with this setup overheating by turning (waking up) on camera monitor while filming. Nothing is bulletproof unfortunately
@jamskof2 ай бұрын
fantabulous. love it.
@persvanstrom2 ай бұрын
Thank you 🙏❤️⭐️
@YoungWhite013 ай бұрын
I’m doing what I saw you do in your video but my R6 stops outputting video over hdmi after 30mins 😢.. not sure what I’m doing wrong
@persvanstrom3 ай бұрын
You need to start recording on the Ninja. Let me know if it helps 👍
@corlissmedia2.03 ай бұрын
Very dramatic video. Good choices of music to support that drama. When you were counting down the solutions on your fingers, I wanted to see graphics on the screen listing them. To summarize: use dummy battery, remove both memory cards, turn off screen, and fold out screen. Your last two solutions are problematic however. With the Ninja V attached, you can use the R6 screen to change F and ISO in response to external conditions. But I saw that you were presenting the screen on the Ninja, and using the wheel to change camera settings, which is not the F and ISO, so this is confusing (at lest to me). I have the R6ii and the Ninja V. Even at 4K-24P I'm lucky to get 9 minutes before the ninja shuts down.
@persvanstrom3 ай бұрын
Your Ninja overheats?
@corlissmedia2.03 ай бұрын
@@persvanstrom god yes! I'm trying to get my Ninja V to work with it. At the most I've recorded 9 plus minutes before the Ninja says there's a problem with the connection, and shuts down. Any input would be MUCH appreciated.
@persvanstrom3 ай бұрын
@@corlissmedia2.0 You run latest firmware? I would check HDMI cable. As it complains on connection…
@corlissmedia2.03 ай бұрын
@@persvanstrom I’m running 1.3.0 on the camera, 11.06.00 on the ninja v
@corlissmedia2.03 ай бұрын
I’m using an atomos cable that set me back $75. The ninja v is going to a 2TB Atom SSD. M with you, the bottleneck is the hdmi D connector on the camera.
@AndresArosemena3 ай бұрын
great video. So you're exposing "normally" when shooting in clog3 and not 1 stop over to then bring it back in post and avoid noise in the shadows?
@persvanstrom3 ай бұрын
Yes, in general and thank you 🙏 How do you prefer to do it?
@AndresArosemena3 ай бұрын
@@persvanstrom I feel if I expose it "normally" I get a lot more noise than if I used rec709. I have seen that the recommendation is to over expose 1 or 2 stops when using clog3 and then bring down the exposure in post, to achieve a similar noise level of the rec709. I have to do some tests
@AndresArosemena3 ай бұрын
great video but what would be the difference in the false color values when shooting in clog3 compared to shooting in rec709? Isn't the recommended way in clog3 to shoot 1 stop over and lower it in post, that way getting less noise in the shadows? What would be one stop over in the false color values?
@persvanstrom3 ай бұрын
I don’t feel I get more noise and as 18% grey never change, this is how I prefer to do it as a rule of thumb. You?
@AndresArosemena3 ай бұрын
@@persvanstrom I have to do some tests. I normally don't shoot on clog3 but just in rec709 but when I have, I feel I under exposed it a bit and I need to bring it up and see more noise than if I raise a same exposed shot but in rec709. I have watched a lot of people recommend to over expose the shot by 1 or 2 stops when using clog3 so that the shadows are more exposed and then in post you bring them down to the level that would have been exposed in rec709 and that would get similar results.
@Apollos20233 ай бұрын
I’ve never saw a video about the AWB white priority. This is new to me. Smh
@persvanstrom3 ай бұрын
Glad it helped. I think I learned from Vanessa Joy tbh when I first started 😊
@logicmr.83513 ай бұрын
Just bought my ninja v+ but it didn’t came with the hdmi cable, whaaat?
@persvanstrom3 ай бұрын
Oh, i’m very sorry to hear that mate. I’ve got mine used with the full accessory pack, but I still use custom HDMI cables :-)
@samueldrouin99743 ай бұрын
Hello :) Is its possible to do exposition with the gray card outdoor ? Or prefer choose histogramme ? 🙏
@persvanstrom3 ай бұрын
You can definitely use it outdoor 👍 I use several combinations.
@jackmen43 ай бұрын
Use an capture card like the elgato 4k pro 2 capture card which does capture external log either hDR or regular log at 4:2:2 10bit
@persvanstrom3 ай бұрын
If shooting close to a computer 😊👍
@philwigley97283 ай бұрын
Hi Per, are you using the same setting as in your back button focus video for R6 where you use single point af? I am intrigued as to how the camera selects the moving person so precisely. Have I missing something. BTW been to Sweden many times but never hit the mark with street photography. You are good.
@persvanstrom3 ай бұрын
If you come close to Gothenburg, poke me and we can hook up for a street photography day together if you like? As to focus. I tend to use spot focus to lock focus on a person and then immediately switch to AF. Goes automatically by muscle memory. Often it’s not needed, but after 150.000 photos in 2y on my R6s it’s just how I do it 😊