This help me out , thank you

Not all cranks can be drilled.

I've changed the throttle body. The charge sensor, the map sensor and I've sprayed all the upper intake with carburetor cleaner and the engine never changed

I have a 2010 throwing the same code

Did you do a part 2?

Great video thanks I'm about to do mine now will update you when I'm done doing it. 😂

Dang it, I wish I would have done this myself. Just took it into the Jeep dealer and I got the $500+ throttle body...lucky me! It's much easier than I thought.

Thank you for producing this KZfaq. It was a great help to me putting a trailer hitch on my FJ Cruiser. Luckily my kit was complete. As were you instructions. My FJ came from a snow bound area so I had some rust issues to deal with. One suggestion to anyone with some rust, you may need to chase the threads with a 12M 1.25 tap (I think that was the tap I used). Use plenty of cutting oil and go slow. You don’t want to break that tap off. While you are under there get some Fluid Film and treat all the frame parts inside and out. There are several good KZfaqs about that.

What suspension upgrades you did for a highway driving?

I need help I changed the sensor on my jeep bank 2 s1-2 but I’m still getting 1129 Exhaust leak was fixed Change pcv Change spark ,fuel injectors, and coils

Thanks Mark, hope you’re doing ok 👍…I’ll get some more out soon…

Glad to see a new video! They are always a pleasure.

This video helped perfectly. Same issue/Same clicking noise. Went with the 10 Factory double carden 1310.

Part 2? I have the 2 same codes.

So glad I came accross your vid as I’ve seen to much negative comments on the 3.8 from those running the 3.6, which after my research, seems the 3.6 has its own set of issues, more complex and expensive

Super🔥Lil🧡1972 Vega-GT PRO💘Street Car!!! #1zt. Off thoz lil Ugly😱Chrome Mirror’z toss’s n tha 🗑️ Trash Can !!! & Add Frunt & Rear Spoil’r!!! Beautifull Wheel’z &🖤Tire’z Nice N’terior & Hugger Orange Paint iz Awe-$um !!! Quick-Trip & Vide-O!! But Than’X & Love Tha🤍Benz-O 2 + Beam’r!! But tha 72🧡VEGA iz #1zt🏁💯U.S.A.🇺🇸Made !!!

I had my FCC Licence since 2017

The reason you need a License is due to the wattage of your radio Because yours is I believe 25 watts which s double the wattage of your CB and yes the FCC DOES enforce the law.

Dealing with this issue now. Have you had any luck fixing this yet?

Like the ball cap, I'm jk owner and retired/disabled FMF CORPSMAN, NAVY!

I did this to my 2011 jk and its still going into limp mode. I'm having the same exact issue and have spent a lot of money trying to figure it out. I came across this video with lots of confidence that this was my issue but it appears to not be. Any tips? I did the relearn process but its hard to tell if it actually activated that.

I have a 66 327 sbc and harmonic balancer bolt won't bolt down thanks for the video

I might trade my 11 g37x coupe for an 07 rubicon 2 door with a bunch of upgrades and recently rebuilt motor tomorrow. What you think? 135k miles on g37, 174k on jeep. Silver jeep blue g37. Oh and the g37 is auto and jeep is a 6 speed manual

Do you have the link where I can buy the 10 pz

I am having the same issue on a 09, very frustrating, I cannot find part 2. Any luck?

The leads for your trigger run off of DC. The solenoid for those kits also run off DC. You can piggyback the hot and ground for the trigger to the solenoid with a relay. Check and see what the voltage is whether it is 12 or 24 and buy the appropriate relay and then run the wires from the relay with a piggyback for your hot to the solenoid. So long as the cable has a gas connection you can still do it and if it doesn't you can always upgrade your cable and gun for gas pass that it's just a hose. It's not rocket science and it's not a plug and play but polarity doesn't matter so it makes it really easy. You pull the trigger that completes the circuit, that flips the relay that engages your gas solenoid. If it's 12 volt I promise you you have a 12 volt relay somewhere in that garage 🤣. The board that is compatible just as the same thing when the circuit's complete it trips the solenoid You're just doing it with a relay. Don't overthink it you got this All you need is a multimeter some spade connections a couple pieces of short wire and you're in business. Never accept defeat 😁👍.

Thanks for taking the time.......... great

Good video 👍🏽

I've got a 2013 jeep wrangler sport. I've had it 3 months now and love it. I've done somethings too it and still upgrading on it. It's got the soft top 3.6 V6 6speed and a 2 door. Love it.

Do I need to change gear ratio for 33 inch tires?

I have 2011 identical version, except hardtop. Silver, unlimited, roof rack. I only get 11-12 mpg as well and I have stock front and rear bumpers. 33 inch tires, and 2.5 inch lift. Engine just died a month ago with a little over 150,000 miles on her. She's in the shop now getting a new/rebuilt Jasper engine. I hope she'll be like new after that and give me many many more years of trouble-free service. Thanks for the video. You did a great job keeping yours running and looking great all these years.

Thank you for the video. Saved me an expensive trip to the dealership. One thing I wanted to mention though- when I first installed the sensor, my Jeep was still running like crap. On the advice from a guy at Autozone, I disconnected and reconnected the negative battery terminal to re-boot the system. Once I did that, all the problems went away. Thought you may want to include that last step in your video.

Just found your station..Great vid.. New to GMRS and looking at the Midland Antenna... Stay cool up in cali..Daughter still lives in Calaveras Co and it gets fkn hot !!

Thank you so much! My top hose popped off and I couldn’t figure out how to get it back on. My husband tried to help me but I’m better with seeing it lol. Also, thanks for showing us how to burp the line. I had no idea what he was talking about.

The FCC License is $35.00 for 10 years and they DO enforce it!

Thank you! I will be doing this job on my 235 Inline 6 with that exact tapping kit, now I have some confidence to do it! Was a little nervous but I see it's slick with that kit, appreciate you sharing this!

Had a p0740 check engine light, pulled the solenoids and sure enough the TCC one wasn't clicking.

How many miles on it.

I usually just spray the sensor with a bit of electronic contact cleaner let it dry real good and it read a lot more accurately. New o ring is about $1 or less if you buy a kit and use it on multiple projects. Good video nonetheless.

Great to see you putting out more videos again, Chris!

The sensor on the gas pedal talks to the throttle bottle. Has stupid as it sounds the gas pedal could have gone "bad" they sell the pedal and the censor has one piece. Just another thing to consider, im no expert though. A little familiar though as i have the same 07 you got, just a two door.

If I want to change my serpentine belt at the same time as the hoses, is there a certain step in the video where it would be best to do it?

I got a 2007 as well. How do you change cabin air filter

why don't you weld it to your chest

My 3.8L has 240k+ on it. She uses a little oil, but runs pretty good still.

*promo sm* 🤗

BOTTOM LINE JEEPS ARE JUNK BUT THEY ARE COOL THE PEOPLE THAT HAVE THEM PUT UP WITH THE B/S A K A $$$$$$$ AND MORE $$$$$$ BUT THEY ARE DIE-HARD JEEP FREAKS / IT'S LIKE IN THE 70S THE GUYS LOVED AND STAYED WITH H.D. M/C AND WOULD NOT CHANGE FOR ANY THING / EXCEPT WHEN THE TWO FACED RATS SOLD OUT TO FISH FACE COMMIES AND EVEN WENT ELECTRIC / THE A HOLES AND THAT WAS THE BIG MISTAKE BIG PIECE OF CRAP / WE NOW CALL THEM A HARK-E -FAR- BA-SON / HAY MAN DID YOU BUY ONE OF THEM CHINESE HARK-E-FAR-BA-SON YOU FOOL / LIKE JEEP SOLD OUT TO BOCH-GA-LU'S PASTA WAGON BUILDERS MORE JUNK

WE DON'T NEED NO STINKING CARPET

Thanks man, also good luck with retirement 🙏

Awesome video sir. We just reached out to you via email for inquiring an opportunity of product review. Hope hear from you to see what we can do