I am so happy I found this! My cabinet was driving me crazy because it wasn’t staying open. I was so close to change the hinges … but then I watched how to adjust them and the door stays up! Don’t need to hold it with one hand to put the glasses away 😂 Thank you so much!!
@milansiljkovic50156 күн бұрын
Seich , scheissdräck schlimm
@SteelerPride9910 күн бұрын
I have had this system for several years and one of the telescopic arms snapped due to the plastic portion breaking. Anyone have this happen or know why it happened? I thought it might be the tension on the lift system was too tight, so I loosened it, but then cabinets droop very low and are not very practical.
@stevetaylor524323 күн бұрын
Hi my drawer unit is very noisy on closing, almost with a grating sound, what is the issue here. Brand new install yesterday but disappointed with the sound of the drawer unit. It's a BLum tandembox blumotion runner, any ideas UK based ????
@joshdonesky345026 күн бұрын
Does this work with Blum Soft Close hinges and they still self close? OR do I have to push them closed each time?
@vernonandrews636726 күн бұрын
Add some part numbers on the template jigs
@ahmedmounir289728 күн бұрын
Should I adjust tension for both mechanism sides , or for only one mechanism (left hand sided)
@Atelier-HermesАй бұрын
😍😍😍
@cp-petarАй бұрын
Where do you show how to put locking devices onto the drawer?
@marcopolo4954Ай бұрын
What to do, when there is enough tension, but Aventos HF does not soft close in the end of closing position?
@AjayDhatrakАй бұрын
What is the function of middle long rod, is it useful for any adjustment?
@A2Zvlogbd11Ай бұрын
Hi hope you are well, I visited your KZfaq channel. Really nice video. I like it. i alrady subscribed. But your video SEO score is very low, Tags, descriptions, and titles are not perfect, If you want to grow your channel and increase your video views, and subscribe. then video SEO is very important. your channel will get organic traffic, increase subscribers & views for Monetization, videos go viral and your channel will go to the top rank on KZfaq. if you really want improve your channel then you should fixed below issues 1.vidio seo 2.titel 3. video tag 4. nice thumbnail 5.channel intro video 6.channel banner 7.full channel setup
@timothyely9504Ай бұрын
Can't wait to spec them, but that mortise looks like a bear.
@timothyely9504Ай бұрын
nevermind ;) third video explained it.
@thomastolborg94202 ай бұрын
Hi Blum USA Is the Rear Mounting Bracket not marketed in Europe? I can't seem to find it anywhere. Actually ... I can't seem to find it mentioned anywhere in any official Blum material.
@masumreza17302 ай бұрын
Hello Sir,Mam I Visited your KZfaq channel and noticed it ranks lower than others. SEO seems to be lacking, though your content is fantastic. Wondering why your videos aren't attracting more views? One key factor is insufficient SEO (your videos' SEO score is 00/100%, that's why your video is not reaching out to the people and you do not have many subscribers, views, likes, watch time, and comments. I also noticed that your video thumbnail was very poor. If you'd like, I can assist you with improving it. I think your KZfaq channel will make your dream come true. I am waiting for your response.
@animalslife4873TT2 ай бұрын
Hello there! I hope you are well. I have seen the videos of your channel. Your video is very good but your video optimization is very poor 1. SEO Score is very low 2. Title - Description - NotTag SEO friendly 3. No Share Social Media Platform and many problems on your KZfaq Channel Immediately need SEO for your KZfaq channel I am waiting for your response.
@ranjitvirdi23542 ай бұрын
Nice 💯
@MsIsetan3 ай бұрын
My issue is reusing an existing hinge on a new door. The parts that expanded slightly to fit the original door, stay expanded and won’t fit into a new door.
@pnw-coast3 ай бұрын
Would be helpful to see the side view before and after the adjustment, to see what is actually changing. I've used this adjustment on my slides and haven't noticed much of a difference.
@callumwinkler1943Күн бұрын
I agree they should show a before and after but it is incredibly simple. The adjustment is only changing the horizontal angle of the drawer from back to front. The top of the drawer front would have pinched closer to be sitting flush from top to bottom now. I fitted these exact runners recently on a job.
@jbarrett14483 ай бұрын
Does the Tip-On device work on all Blum slides?
@BlumInc3 ай бұрын
No, the TIP-ON BLUMOTION mechanism is only compatible with our MOVENTO runners.
@lhartwig23543 ай бұрын
Don’t understand how to use the orange block thing what are the measurements referring too? The thickness of the drawer front? Mine are 3/4”.
@BlumInc3 ай бұрын
What you're seeing is called a Front Gap Template. This piece helps set the 1/8" gap needed between the drawer front and the runner.
@lhartwig23543 ай бұрын
@@BlumInc but don’t understand how to you it. You mentioned a measurement for which side to use but didn’t show what that measurement was referring to. Again I didn’t understand how to use it. I have one drawer even though everything is the same does not have a gap so it doesn’t work. And several and it takes two hands to push to open even though I have sync rods in all of them.
@Helmslice3 ай бұрын
I bought Blum 110 Degree Soft Close Hinges - Full Overlay Soft Close. Can I use this with those hinges?
@BlumInc3 ай бұрын
You can! The TIP-ON that will work is part number 956A1006.
@joecox99583 ай бұрын
missing drawer part,why?
@BlumInc3 ай бұрын
Can you explain a little more about what you mean?
@kaloyanyunchov85184 ай бұрын
Hi. I already do the installation but the right side runner isn't working soft close. Was ok but once i fixed the locking sistem,the soft close stop
@crazyirish44 ай бұрын
What’s the set back calculation for inset drawers?
@liutaurasmezanskas46404 ай бұрын
would be nice to see the bottom of the drawer ,where those runners click on to
@BlumInc4 ай бұрын
Thank you for your feedback - we'll pass that along to our team!
@jdawkins1114 ай бұрын
you have to be kidding. this didn't occur to you?? @@BlumInc
@BlumInc3 ай бұрын
You can see where the runners attach to the locking devices in this video: kzfaq.info2KttAOA0lqA?si=8QpoWvsNNAZhN45s
@zaman_ador204 ай бұрын
Your video is good. But you got 1100 views in the 1years though you've almost 4k subscribers, which is not enough to reach your audience. I analyzed your video and got some issues you need to fix to get your targeted audience and reach them easily. First of all your videos are not SEO-optimized, you need to optimize it Your current SEO score is 0. It's not enough to get the audience. It would be best if you push more tags, related tags, and channel tags, your description and title was not SEO-friendly. If you fix these issues, it will give you more views and also reach your audience, then you can grow your sales. I hope this will help you and if you want I can help you. Thanks
@yelenakagan35434 ай бұрын
A homeowner here, purchased 4 F boxes for an entertainment center. Was surprised to find out that not a single screw is included with the hardware. Is that intended?
@BlumInc4 ай бұрын
Great question - yes, our screws are sold separately. We recommend #6 x 1/2", #2 Phillips screws for installation.
@iordanstoev4 ай бұрын
I have a question. In a video from your profile - 'Universal Individual Template', the holes for Tandembox rails are 40mm from the front of the cabinet (visible on the universal template). Here for Legrabox you state 37mm. Are both valid - Tandembox 40mm, Legrabox 37mm?
@BlumInc4 ай бұрын
Hey there - Both LEGRABOX and TANDEMBOX have a 37 mm setback from the front of the cabinet to the third screw hole.
@iordanstoev4 ай бұрын
@@BlumInc , thanks a lot!
@ChrisCox-jn3ou5 ай бұрын
Great video thanks! The template is the way to go.
@dewzas67895 ай бұрын
在哪里可以买到?
@kingparch5 ай бұрын
Why were there extra holes in the gables on the last shot when inserting the drawers?
@BlumInc4 ай бұрын
Hey there - Great question! We'd used this cabinet previously for a different application, and those holes were just from that. Thanks!
@idealdecoration17015 ай бұрын
BLUM, the best in the universe.
@user-hr9bl5jd9o5 ай бұрын
Thank you for clear info and dimentions and how they are applied
@camuga835 ай бұрын
That is exelent...But...What about Aventos HL... No information about HL anywhere..Not even in the catalog..
@benjaminvolgger93705 ай бұрын
Whats wrong when i want to close and it comes back out?
@siva297015 ай бұрын
Super fitting 👌👌👌👌👌
@syedyaqoob80635 ай бұрын
Blum is super mechanism I want more details thanks
@aartvarkgraphics6 ай бұрын
What if this is no longer getting a grip in the holes of the door? My guess is that the holes have eroded to some degree.
@BlumInc6 ай бұрын
If the holes cannot hold the hinge in place, you have a few options - you can bore new holes, add wood filler or replace the door completely. Hope that helps!
@aartvarkgraphics6 ай бұрын
@@BlumInc I ended up just taking them down and reseating them, and that seems to have helped a lot. I believe they were poorly seated in the first place. I did add some shim material on one where the clamps make contact, and that helped. Thank you very much for your reply.
@ronh93846 ай бұрын
Thanks for the tip!
@hildejutta16256 ай бұрын
If I replace a broken power supply with a new one, can I merge the old distribution cable on the right and the new distribution cable of the new power supply on the left in the connection node? Normally, one cable leads to one charger and the second is the distribution cable (I have 1 power supply for multiple charging)
@BlumInc6 ай бұрын
Yes, the INSERTA cable connector can be used by them to just connect the new power supply to the existing distribution cable. The only key here is that there is only one power supply per system/circuit.
@annettewilcox54136 ай бұрын
I’ve installed the slides but when I push draw I. It doesn’t click to anything. What did I do wrong ?
@oGGi3mOnsTer6 ай бұрын
Did you drill the hole in the back of the drawer
@annettewilcox54136 ай бұрын
@@oGGi3mOnsTer not sure about the boring hole. What is this needs for? but realized my bigger problem is i I didn’t add locking devices. Didn’t realize I needed them. Have ordered them.
@s70cas7ic06 ай бұрын
Is it possible to use just one tip on modules on a narrow drawer with movento sliders? Two modules wouldn’t fit in the space between the sliders
@BlumInc6 ай бұрын
Unfortunately, we cannot recommend using it with just one TIP-ON unit.
@s70cas7ic06 ай бұрын
@@BlumInc thank you, I wanted to try that in a 24cm wide (internal) cabinet
@arson1147 ай бұрын
Hi, Anyone know why one of my tip-on blumotion drawers suddenly makes a click then pops back open after closing?
@BlumInc6 ай бұрын
Hey there - Please call our customer service department at (800) 438-6788. There are a few things that could be causing this issue. Thanks!
@itbiytc92995 ай бұрын
I have the same problem. I am living in Belgium. How can Blum help me? @@BlumInc
@arson1147 ай бұрын
Anyone know why one of my drawers makes a click then pops back open after closing?
@BlumInc6 ай бұрын
Hey there - Please call our customer service department at (800) 438-6788. They can help you troubleshoot!
@decosse017 ай бұрын
@BlumInc I was interested to learn more about this & thankful I researched it more, with this overview - frankly it appears pretty under-whelming when it only opens marginally. I think Blum unfortunately fell short with this product.
@bradkelly89557 ай бұрын
Where can I purchase this Legrabox boring template
@BlumInc6 ай бұрын
Great question! It's available through any of our authorized distributors! www.blum.com/us/en/contact/wheretobuy/
@barak7244424 күн бұрын
Hi what is the numbers for the legrabox?
@hvgobel7 ай бұрын
There is a typo at 2:16, it says 21/32" where it should be 31/32"
@BlumInc6 ай бұрын
Thanks for pointing that out!
@bi0b0b7 ай бұрын
It seems the F Height Legrabox uses M and C clips for the front, should the front clips be attaching to anything in the drawer side? Or should the M clips be just 'floating' around inside the side?
@BlumInc7 ай бұрын
Great question - C attaches to the mechanism inside the drawer profile, the M height bracket floats freely inside the top of the drawer profile to prevent flexing from side to side.