How to Install Blum TIP-ON for Doors

Рет қаралды 20,426

Күн бұрын

In this video, you’ll learn how to measure, drill, and install Blum’s TIP-ON mechanical opening system for doors. TIP-ON can be installed using one of two methods: boring into the side panel or using an adapter plate. When drilling into the side panel, use the Blum TIP-ON for Doors Boring Template to make installation easier.
TIP-ON for doors is Blum’s push-to-open solution, which allows you to push on the door to open it. No handles or knobs needed! TIP-ON comes in options for standard doors, large doors, and soft-close doors.
0:00 Intro
0:12 Color Options
0:19 Types of TIP-ON
0:35 Boring Installation Method
3:02 Adapter Plate Installation Method
4:06 Outro

Пікірлер: 10

@enduroboykivshchyna 8 ай бұрын

Дякую! Коротко і зрозуміло....

@joshdonesky3450 8 күн бұрын

Does this work with Blum Soft Close hinges and they still self close? OR do I have to push them closed each time?

@SultanaRazia-jx8mk Жыл бұрын

Good job❤❤

@chrissalup1889 Жыл бұрын

Extremely professional instructions! I love my Blum soft close cabinet hinges! The multiple adjustments show are some of the top of line kitchen products Blum provide.

@Helmslice 3 ай бұрын

I bought Blum 110 Degree Soft Close Hinges - Full Overlay Soft Close. Can I use this with those hinges?

@BlumInc 3 ай бұрын

You can! The TIP-ON that will work is part number 956A1006.

@dewzas6789 4 ай бұрын

在哪里可以买到？

@atexnik 9 ай бұрын

The screw-on catch plate is installed incorrectly in your video. Check your own cataloge, it says, that the screw-on catch plate should be offset by 3 mm towards the inner edge of the side panel. So, knowing that the tip-on hole is on the distance of 7.5mm, then the screw should be installed on 4.5mm, so that it is the washer plate that touches the tip-on magnet, not the screw head. This is done on purpose, because the screw itself might be made from a non-magnetic material.

@BlumInc 9 ай бұрын

Hey there - All of our US specific literature shows the installation of the screw-on strike plate as being centered with the TIP-ON device for ease of installation. The European literature shows different as that is their chosen method of installation. This could be due to countries outside of the US using screws that do not contain a sufficient amount of magnetic material in them.

@atexnik 9 ай бұрын

@@BlumInc that's interesting. Thanks for the clarification. I checked myself on the US specific manual, it really shows the plate centered with the tip, unlike the EU catalog requiring 3 mm offset.