Running with an ASRock B450 Pro4 (NOT THE M) and bought the WD 850x 4TB for the second M.2 slot... only to figure out the dang thing is for SATA 3 M.2 and not NVME M.2... (Didn't know this was a difference, it's not made clear.) Regardless, question for this part... I've installed the NVME M.2 into it and still do not see it available in Device/Disk Management, nor on my BIOS... any idea for solutions anyone??

Thank you for this

Tried several times and can’t detect sigh…

can i use hdmi 2.1 cable in a hdmi 1.4 devices??

5:07 he got tired of smiling.

Before my laptop killed itself I was going to upgrade the ram because it had 2 slots (one extra). I had to buy a new laptop and found out that there was only one slot which was annoying.

If I plug this into a UK 230V socket with an adaptor, will I need to use a transformer, or will the power block sort itself out?

should i use it for games on my pc?

KZfaqr: Talks about how good AV1 is awesome. Video Created: VP09 and not AV1...

i thought u need like a specific drive or smthing so check then get a drive put it on thats it?

The video does a great job explaining the basics of ECC memory and why it’s crucial for servers and big data centers. However, there’s a bit of confusion around DDR5’s on-die ECC. It’s true that DDR5 has on-die ECC to handle internal errors due to higher speeds and density, but it’s not the same as full ECC used in servers. On-die ECC helps with stability within the RAM chip, but it doesn’t correct errors in the data transfer between RAM and the CPU. For us average users, this means we get a bit more reliability, but not the full error correction benefits that server ECC provides. Still, any improvement is better than none, right?

So Nate from Ted Lasso became a techy?

Explained, never shown any test or benchmark

❤❤❤❤❤❤❤❤❤

Too loud too slow !!! Total rubbish . Used it on the Mac Studio m2 Max 2 sata 3 ssd 4TB. The fan makes almost 58db(a) the speed via usb c not even 400 mb/s

at 7:55 you show the button being pressed with the power disconnected. The documentation does NOT give clear instructions on how to process the RAID set up - so I don't know if I have a bad system (trying to configure for a new set of HDDs) or if I am doing it wrong. Please advise or add a new video showing exactly how to set up/clear a configuration.

I have 3 (so called) High-End HDMI Cables from different suppliers ---NOT ONE OF THEM HAS THE CABLE STANDARD PRINTED ON THE CABLE JACKET OR THE CONNECTOR! AMERICA IS BECOMMING VERY, VERY SLOPPY!

The Disk Management saved my ssd. Thanks for this video.

Nice video!

Does this work with PCIe x16 gen 2? I know it'd be limited by gen 2 speed but does it work?

$70 yikes!

I have bought 1TB Kingston ssd and sabrent ssd enclosure, it was detected in manage devices but it required formatting and allocation of drive space. Now works like charm. Thanks for the video.

Can you access both the SATA and NVMe drive via the USB at the same time?

I like the idea that this is more of an adapter for the drive, as opposed to for the motherboard. It seems it would keep the drive quite safe when out of the machine as well. I have one question I haven't been able to find an answer for, if I'm using this on an older motherboard with PCIe 3.0 I know I won't get the full potential of the M.2 drive, but will I still get more speed than the SATA3 SSD I have now?

What the flip is wrong with you? So SHOW the sas drive connector so we can SEE for ourselves what they look like. You bable stats of no relevance but SHOW nothing to identify the drives you talk about.

Will you answer me sir! 10-Bays, do each bay can read 20TB Capacity of HDs? What is the maximum capacity of HDD for each bay that it can read?

Thank you from malaysia. ❤

Is it safe to use other type of ram for exemple I have a 16 gigs of ram stick on ddr5 if I use a DDR4 stick with more or less ram will it work ?

Would be great to have one of these with a Thunderbolt 4 usb c.

I got a new hotas for my flight sim computer. Work with thier tech department they said my current unpowerd usb hub does not have enough power to support all 3 and recommended i get a powered usb hub. I did not even that was even a thing. With close to 5k reviews on amazon with 4.5 stars i think i am going to give this powered usb hub a try.

Very disheartening too see a reputed company like u including trojans in ur firmware update. u just lost a valuable customer .

And what is "spare" option?

I smashed the like button. Disk management saved my new SSD drive and now it is showing up

Can this run the Ethernet, HDMI, and at least two SSDs via USB 3.2 ports on a connected computers BUS power alone or does that require external power via the power-only USB -C port? I like the 85W PD, yet I want to know if I can use it on the go with the only power coming from my MacBook Pro’s battery

I've got two of them and they're fantastic SABRENT is making it super easy to be a data hoarder

❤❤❤❤❤❤❤❤❤❤❤❤

Will this work with PlayStation 3 hard drive?

Can you use the hardrive from a ps3

Any time line to when any manufacturer, perhaps even Sabrebt) will bring an SDExpress card to market? I see lots's of readers, but all I can find are UHS-II cards (which are not SDExpress)?

im trying to pair gaming laptop to montior what do i need to look for because in region there is 180 hz screen with hdr 400 but has all the features like display port 1. 4 or get the 165 hz that has 1.2 ( gaming laptop is 3080 legion series 165hz qhd

Hopefully 4tb versions come out eventually

🤓 Excellent Explanation!

Just wondering how much longer did AV1 take to decode over H265?

It’s pronounced Scuzzy not Es Cee Es Eye

Never have I ever felt the need to use an electric screwdriver with these. That scares the crap out of me.

Make a USB 3.2 version that also shows the speed on the display and you'll have my money.

Just 60watt? Bruh most standard laptops is 65watt and soon to be 70watt

I have an issue that I cant seem to solve. During video mode, my CFexpress card shows only 5 mins left on recording time. I checked the cfexpress card on the computer and still shows 500GB left on the card. I can always delete it on the computer to make room, but if im on site how can i utilize more of my memory card? I cant seem to find the answer.

Can i use this for my usb mic to plug it into my mixer?

The bottom is all plastic, where the RTL9210 controller is, no ventilation, BAD design. I returned mine.