I have been looking at that one myself price is not a factor I own A Mac and Milwaukee stubby 3/8 so it’s more of a thing to have then a thing I need
@BlackMountainCycles2 күн бұрын
*AND…* they make a great roach clip.
@FromTheHood2TheWoods3 күн бұрын
This crackhead put my chain too tight! I drove about 12 miles with it super tight. Do you think I caused any permanent damage? 2019 Kawasaki Versys 1000… just bought this damn bike can’t even enjoy it, all the motorcycle shops are too busy to work on it. Don’t wanna leave it there for two weeks. I’m out here in the Smoky Mountains. Just want to enjoy the summer! So aggravating.
@rotbuster5 күн бұрын
should you replace both tires or you can do just rear tire when front is tire tread is still a bit thick? I have soft compound tires now on my mt07 and its not old tires yet
@FREE_PUREBLOOD3337 күн бұрын
Simple pre ride checks would alert the rider to that. Poor maintenance..no excuse really.
@DogMania7 күн бұрын
Do you happen to have the links for both kits? Wanna do that for my 2015 700! Thanks so much! Love your channel!
@MT-09_SP8 күн бұрын
I apply some silicone lube around the fork tubes with cloth, then I compress the forks a couple of times which pushes the dirt out and wipe it off with dry cloth.
@StephenTillman9 күн бұрын
My poor rear tire is a slick and my front tire looks like a dry lake bed.
@slothmarathonpromotions24709 күн бұрын
After I had my front tire changed out I put my wheel back on and now when I hit the front brakes I get a pulsing feel like it grabs for a half second then lessens for a half second. Any idea what it could be? Maybe my brake pads aren’t set right?
@chaziztheman10 күн бұрын
Anyone else have an issue where the midpipe fits too loose on the y/splitter? It’s not on backwards, everything lines up properly but no matter how tight I get that clamp the midpipe is loose on the splitter. Far too loose for provided firegum/rtv to make up for the gap. Worried I might’ve got a wrong/defective part
@Wtfinc11 күн бұрын
No more running lose chains
@JordanEmede_37611 күн бұрын
Whole new motor...or just the clutch cover 😂
@mcmuphin11 күн бұрын
That's what I was thinking, those cases can be replaced
@non-wx8qm11 күн бұрын
What kind of bike is it?
@zachmetcalf389211 күн бұрын
Cracked the case on my 400ex. I run a chain saver now.
@Fomogarage11 күн бұрын
It looks like the links of the chain further down are kinked up to like it has not been properly lubricated and cleaned either.
@kawiman291612 күн бұрын
They're not called "case savers" for nothing.
@Goat-_-60912 күн бұрын
My bike just did the same thing
@Massacheefa13 күн бұрын
How did you remove the pin that comes stuck under the footpeg I always scrape in the twistys
@motomecha5307 күн бұрын
it should unscrew
@Massacheefa7 күн бұрын
@@motomecha530 I tried unscrewing it but I couldn’t get it off it’s on there pretty good 😂😂
@DieselTechJess14 күн бұрын
Milwaukee all day in power tools
@sleepyrasta1482017 күн бұрын
My bolt that attaches it to the frame is completely rusted its like the bolt and the threads on the frame have rusted together
@chadhamann831517 күн бұрын
Can you use this style on 530 chain? I'm not sure what size chain you were working with in this video.
@brandnamejessx536118 күн бұрын
The larger diameter o ring that is thinner, what does it go to? I notice you didn't use it. Is it for a different setup? Perhaps the o ring it replaced wasn't bad and so you just didn't put the new one in? I can't find any information from they who sell the rebuild kits, as to what the parts are to where they go. Awesome video! Very helpful, Thank you so much.
@bag_full_of_scrubs77018 күн бұрын
Awesome dude! Congrats on the upgrade!
@himanshugautam523519 күн бұрын
Will more clutch freeplay reduce mileage?
@joeheadley602419 күн бұрын
Sorry to say someone gave me a set. The didn’t last 6 months. Floppy
@Lil.D3B23 күн бұрын
Hi, I just got my ninja 400. Is there any other maintenance I should look for besides oil changes, and cleaning of the chain
@loredanatafuro782624 күн бұрын
1,6 mm mindest Profiltiefe.
@kenchristopher547925 күн бұрын
I would like to see a dino before and after.
@trynagetredpilled794125 күн бұрын
I have a 2012 fz8 that i dropped need new but cant figure out how to replace pegs
@robertsebastian78725 күн бұрын
My owners manual says 10 years
@billystuart218428 күн бұрын
Do you have to take the tank off
@TheKringer0026 күн бұрын
absolutely not, it just makes it a little easier but not worth it in my opinion...mechanics like to do a lot of "extra work" just for the actual job to be even slightly easier cause they can bill the "extra work" from the customer...
@roadwarrior856029 күн бұрын
It's amazing all the money we spend on gear and the thought that goes into buying tires but we never even think of suspension.
@mattb664629 күн бұрын
Just changed my back tire this afternoon... what a lovely pain in the ass it was
@JohnnieVАй бұрын
Do conventional motorcycles have 100k mile lifespan? Or is this number over zealous? I mean just with regular oil changes.
@cali8221Ай бұрын
I jus had my clutch changed on my 04 gsxr 1000 and I'm trying to adjust my clutch lever..i dnt like mine loose but are u saying it has to be so its not disengaging the clutch or so it will I mean..I'm confused lol
@Sasquatch10499Ай бұрын
Bet this makes it harder to slide your foot position around.
@h22amonsterb18cАй бұрын
It actually blew me away how powerful these 14.5 impacts are I changed 2, 7 speed Eaton procision transmissions over the past two with this impact, never let me down once.
@Kenneth_McGrewАй бұрын
did you use any jointing compound or anything in the joints or did they fit well enough not to have any leaks?
@ashhimself7513Ай бұрын
Same brother suspension mechanic couldn't do my job efficiently without it ❤️
@patrickwardle3043Ай бұрын
Very helpful
@BigDipper79Ай бұрын
Super cool super super.
@aguiristanteАй бұрын
how did you remove that mddle bushing
@jacobstacy588Ай бұрын
I got both sizes of them needles noise they’re good pliers don’t get me wrong but regular snap on needles noise I like better but besides my cobras and my adjustable pliers wrench all my pliers are snap on knipex and snap on by far makes the best pliers
@jonbuildsАй бұрын
Hey this worked for me, thank you for posting! (I used one of my old bushings as a buffer between the steel exhaust extension/slide hammer and the new bushing to help reduce potential of damage to the new bushing) Great find!
@f_r_e_dАй бұрын
how often should the caliper, rotor, and pads be changed? i just did my 10k service and the dealer says the rear brakes are worn and i don't have brakes so they wouldn't let me leave with my bike. i've been upsold almost 2k for everything and it sucks that i didn't know better. any input helps